Tag Archives: kazmi elecom

TP.MS3663S.PB818 LED TV Board

TP.MS3663S.PB818 is a combo HD&FHD DVB LED TV non-smart Board. It has a supported FHD resolution of 1920×1080 and a Refresh Rate is 50/60 hertz with a smooth motion rate of 200 SMR. It has multiple HDMI ports to connect a set-top box, Blu Ray players, and gaming console, and also has more than one USB port to connect hard drives and other USB devices and play multimedia as well. It has a Dolby Sound system that Supports 16 Watts sound output and HDR Display viewing. TP-MS3663S-PB818 can support multiple LCD/LED panels. TP_MS3663S_PB818 firmware files are given below for free of cost download to support technicians.

General Features and Specifications:

Brand/Mark: China Universal

Model: TP.MS3663S.PB818

Main Chipset: MSD3663LU

Product: LED TV

Resolution: 1366×768

Panel: 32 to 40 Inch

Backlight: 45V-63V 25 W

HDMI Ports: 3

Component: Yes

Tuner: 1

USB Ports: 1

VGA Port: Yes

Scart: No

DTS Studio Sound™ Yes

Analog Audio Out AV Out

Digital Audio Out (SPDIF) Yes

Service Code: 8899

Firmware Type: USB Boot, Backup Dump

Firmware Name: MSD3663LU_OB3353_71.bin

Note The following given firmware is USB bootable and dumps backup files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download firmware files:

Download the following given firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

Here are below some TP.MS3663S.PB818 firmware files free download:

TP.MS3663.PB801 LED TV Board

TP.MS3663.PB801 is a combo HD&FHD DVB LED TV non-smart Board. It has a supported FHD resolution of 1920×1080 and a Refresh Rate is 50/60 hertz with a smooth motion rate of 200 SMR. It has multiple HDMI ports to connect a set-top box, Blu Ray players, gaming console, and also have more than one USB port to connect hard drives and other USB devices and playing multimedia as well. It has a Dolby Sound system that Supports 16 Watts sound output and HDR Display viewing. TP-MS3663-PB801 can support multiple LCD/LED panels. TP.MS3663.PB801 firmware files are given below for free of cost download to support technicians.

General Features and Specifications:

Brand/Mark: China Universal

Model: TP.MS3663.PB801

Main Chipset: MSD3663LU

Product: LED TV

Resolution: 1920×1080

Panel: 32 to 40 Inch

Backlight: 45V-63V 25 W

Backlight Current: 560mA

HDMI Ports: 3

Component: Yes

Tuner: 1

USB Ports: 1

VGA Port: Yes

Scart: No

DTS Studio Sound™ Yes

Analog Audio Out AV Out

Digital Audio Out (SPDIF) Yes

Service Code: 8899

Firmware Type: USB Boot, Backup Dump

Firmware Name: MSD3663LU_OB3353_80.bin

Note The following given firmware is USB bootable and dumps backup files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download firmware files:

Download the following given firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

Here are below some TP.MS3663.PB801 firmware files free download:

SL.358A.PB818 Smart LED TV Board

SL.358A.PB818 is a high-speed 4-Core network driver board with an FHD resolution of 1920×1080. It is dedicated to 28″ to 38″ screens. SL_358A_PB818 has a powerful wifi system. Smart FHD TV features With Android Platform and great features to entertain Full HD Wide Screen with better to work SMART. SL-358A-PB818 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA and Headphones also.

SL.358A.PB818 has a LAN/RJ45 Connector interface port also for the wired/cable internet network. SL.358A.PB818 is a Combo high-speed Network Triple play motherboard that has the  ATV, Backlight Driver Board, and Power Supply Module built-in in it. The Video and Sound quality of SL.358A.PB818 android board is very good and the Response rate is very efficient. SL.358A.PB818 china smart network board has an android 4.4.4 version.

Technical Specifications:

Brand/Mark: FHD Smart LED TV Main Board

Main Board Model: SL.358A.PB818

Main Chipset: MSD6A358ATH-003D

OSD Language: Chinese, English, Arabic, Indonesian

Interface: Single/Dual LVDS

VIDEO INPUT: TV(Details in 3.1) ATV(PAL)/DTV (DTMB)

Operating System: Android 4.4.4

CPU: A35*4

CPU Frequency: 1.5 GHz

GPU: Mali400*2

GPU Frequency: 500MHz

Ram: 512 Mb DDR SD-Ram

Rom: 4Gb eMMC

Audio Output: 2x8w

Resolution: up to 1920×1080 (28” to 38″)

Panel Power: 12V, 5V

Power Input: 100-240V AC

Service Code: Menu+1147

Firmware Name: msd358_4G_512M_AS_ref48.bin

Firmware Type: USB Upgradeable

Firmware Rename: rename the main bin file as “msd358_4G_512M_AS_sos.bin” for universal type

Note: The following given firmware is USB upgradeable. Download all parts of the required resolution and then extract/unzip anyone of them you will get the folder. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware Files:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

SL.358A.PB818 firmware files for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

S368LA1.5/S368A1.5 Android Smart Board

S368LA1.5 S368A1.5 is a Full HD resolution 1920×1080 smart board with the latest android version of 9.0 pie. S368LA1_5/S368A1_5 is universal with a DC supply and good audio output. S368LA1.5 S368A1.5 can support many panel screens from 14 inches to 55 inches with the best picture quality. S368LA1-5 S368A1-5 has multiple connectivity ports like AV, Dual HDMI, USB, and Digital Tuner input. Its special features are the Mirroring option, WiFi support, and inbuilt Apps. S368LA1 5 S368A1 5 firmware files are given below for the technician’s support.

General Features & Specifications:

Brand/Make: LCD/LED 4K Smart Driver Board

Model: S368LA1.5, S368A1.5

Supported Resolution: 1920×1080 FHD

Screen Format: 16:9

Chipset: MT9255

Platform: MT5862

Operating System: Android 9.0

CPU: ARM Cortex-A53 quad-core

GPU: Mali-400

RAM: 512M/1Gb

ROM: 4Gb/8Gb

Audio Chip: CS3817BEO

Sound Output: 15Wx2

Sound IC: CS3817BEO

Transmission: ATV/DVB-T2

Video System: PAL/SECAM

Power Input: 12V DC

Panel Power: 3V, 5V, 12V (Jumper Cap Setting)

Firmware Name: VS_MT9255_512M.bin, VS_MT9255_1G.bin

Firmware Type: USB Upgradeable

Service Menu Code: Menu 815

Resolution Code: Click Here

Logo Change Code: Input 5188

Logo Name: vs_cus_logo.jpg

Tuner: AB253

Price:

The price of this Universal Smart Android LED TV Board is approximately USD 25 but keep in mind that the price should be varies according to the dollar rate in Pakistan. Convert the dollar rate in rupees to get the approximate price in PKR. you can also convert the dollar rate in Indian rupees to get the local currency value. This price is for 512+4GB 1+8GB may be a higher value than this.

Supported Resolutions:

• 1280×1024
• 1366×768
• 1440×900
• 1440×1050
• 1600×900
• 1680×1050
• 1920×1080
• 1920×1200

Note: The following is given software for Technician’s support. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware.

How to Download S368LA1.5 Firmware Files:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

S368LA1.5 firmware files for free download:

PANASONIC LCD LED TV Software Collection

Panasonic LCD LED TV is widely used in the world. Each and Every Panasonic LCD LED TV has its specific program or firmware/software installed in its motherboard by which the tv functions can be operated. Sometimes, In some cases led tv stops working due to technical reasons and is not properly displayed, or the standby light remains red/blue. If the TV did not start normally then we need to reprogram the LED TV with its specific firmware/software. It is very necessary for us to have the backup dump of that LED TV to restore the tv to normal condition. So, here are some backup dump files of Panasonic LED TV firmware for free Download to support the technicians. Download free Panasonic bin files for your LCD/LED TV.

All following given firmware of Panasonic LCD LED TV is saved with programming tool and can be loaded into tv with the programmer. Each LED TV Model has its own specific Software File that you can download for a specific model. It is advised to all beginners that first save the backup of the old software before installing new software or remove the original flash IC and load the software in a new flash ic then mount it. In case of any trouble, you can replace back the original flash ic to avoid any issues.

Panasonic LCD LED TV boards do not have the option of Mirroring/Flip or inverting the function setting of the panel. So, if the picture is inverted or flipped then you should load the software of the upside-down picture. Some software in the given list is bifurcated and some or not. you may check it by yourself if you face such types of problems during the software installation.

In some cases, the main motherboard is the same but the channel scanning issue is observed. It is because the different tuner is mounted on the same board. So, you need to first verify the tuner ic part number to load the proper firmware.

Note: 

All software files are saved from working Panasonic LCD LED TVs with the help of the Programming tool and can be loaded or written by the programmer. Some firmware files are USB upgradeable.

Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/Installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download PANASONIC LCD LED TV Firmware Files:

1. Click on the Search box available top right corner of the webpage.
2. Type your desired model number.
3. Click on the search result below.
4. Read the post you will get the download link.
5. If your desired model is not shown in the search results then comment.

Visit my Youtube Channel and watch several video tutorials for a better understanding.

TOSHIBA LCD LED TV Software Collection

Toshiba LCD LED TV is widely used in the world. Each and Every Toshiba LED TV has its specific program or firmware/software installed in its motherboard by which the tv functions can be operated. Sometimes, In some cases led tv stops working due to technical reasons and is not properly displayed, or the standby light remains red/blue. If the TV did not start normally then we need to reprogram the LED TV with its specific firmware/software.

It is very necessary for us to have the backup dump of that LED TV to restore the tv to normal condition. So, here are some backup dump files of Toshiba LED TV firmware for free Download to support the technicians. Download free Toshiba bin files for your LCD/LED TV.

All following given firmware of Toshiba LCD LED TV is saved with programming tool and can be loaded into tv with the programmer. Each LED TV Model has its own specific Software File that you can download for a specific model. It is advised to all beginners that first save the backup of the old software before installing new software or remove the original flash IC and load the software in a new flash ic then mount it. In case of any trouble, you can replace back the original flash ic to avoid any issues.

Toshiba LCD LED TV boards do not have the option of Mirroring/flipping or inverting the function setting of the panel. So, if the picture is inverted or flipped then you should load the software of the upside-down picture. Some software in the given list is bifurcated and some or not. you may check it by yourself if you face such types of problems during the software installation.

In some cases, the main motherboard is the same but the channel scanning issue is observed. It is because the different tuner is mounted on the same board. So, you need to first verify the tuner ic part number to load the proper firmware.

Note: 

All software files are saved from working Toshiba LCD LED TVs with the help of the Programming tool and can be loaded or written by the programmer. Some firmware files are USB upgradeable.

Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/Installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download TOSHIBA LCD-LED Firmware Files:

1. Click on the Search box available top right corner of the webpage.
2. Type your desired model number.
3. Click on the search result below.
4. Read the post you will get the download link.
5. If your desired model is not shown in the search results then comment.

Visit my Youtube Channel and watch several video tutorials for a better understanding.

SAMSUNG LCD LED TV Software Collection

Samsung LCD LED TV Software TV is widely used in the world. Each and Every Samsung LED TV has its specific program or firmware/software installed in its motherboard by which the tv functions can be operated. Sometimes, In some cases led tv stops working due to technical reasons and is not properly displayed, or the standby light remains red/blue. If the TV did not start normally then we need to reprogram the LED TV with its specific firmware/software.

It is very necessary for us to have the backup dump of that LED TV to restore the tv to normal condition. So, here are some backup dump files of Samsung LED TV firmware for free Download to support the technicians. Download free Samsung bin files for your LCD/LED TV.

All following given Samsung LCD LED TV Software is saved with a programming tool and can be loaded into the tv with the programmer. Each LED TV Model has its own specific Software File that you can download for a specific model. It is advised to all beginners that first save the backup of the old software before installing new software or remove the original flash IC and load the software in a new flash ic then mount it. In case of any trouble, you can replace back the original flash ic to avoid any issues.

Samsung LCD LED TV Software. TV boards do not have the option of Mirroring/flipping or inverting the function setting of the panel. So, if the picture is inverted or flipped then you should load the software of the upside-down picture. Some software in the given list is bifurcated and some or not. you may check it by yourself if you face such types of problems during the software installation.

In some cases, the main motherboard is the same but the channel scanning issue is observed. It is because the different tuner is mounted on the same board. So, you need to first verify the tuner ic part number to load the proper firmware.

Note: 

All Samsung LCD LED TV software files are saved from working Samsung LCD/LED TVs with the help of the Programming tool and can be loaded or written by the programmer. Some firmware files are USB upgradeable.

Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/Installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download SAMSUNG LCD LED TV Software Files:

1. Click on the Search box available top right corner of the webpage.
2. Type your desired model number.
3. Click on the search result below.
4. Read the post you will get the download link.
5. If your desired model is not shown in the search results then comment.

Visit my Youtube Channel and watch several video tutorials for a better understanding.

LG LCD LED TV Software Collection

LG LCD LED TV is widely used in the world. Each and Every LG LED TV has its specific program or firmware/software installed in its motherboard by which the tv functions can be operated. Sometimes, In some cases led tv stops working due to technical reasons and is not properly displayed, or the standby light remains red/blue. If the TV did not start normally then we need to reprogram the LED TV with its specific firmware/software.

It is very necessary for us to have the backup dump of that LED TV to restore the tv to normal condition. So, here are some backup dump files of LG LED TV firmware for free Download to support the technicians. Download free LG bin files for your LCD/LED TV.

All following given firmware of LG LCD LED TV is saved with programming tool and can be loaded into tv with the programmer. Each LED TV Model has its own specific Software File that you can download for a specific model. It is advised to all beginners that first save the backup of the old software before installing new software or remove the original flash IC and load the software in a new flash ic then mount it. In case of any trouble, you can replace back the original flash ic to avoid any issues.

LG LCD LED TV boards do not have the option of Mirroring/Flip or inverting the function setting of the panel. So, if the picture is inverted or flipped then you should load the software of the upside-down picture. Some software in the given list is bifurcated and some or not. you may check it by yourself if you face such types of problems during the software installation.

In some cases, the main motherboard is the same but the channel scanning issue is observed. It is because the different tuner is mounted on the same board. So, you need to first verify the tuner ic part number to load the proper firmware.

Note: 

All software files are saved from working LG LCD LED TVs with the help of the Programming tool and can be loaded or written by the programmer. Some firmware files are USB upgradeable.

Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/Installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download LG LCD LED TV Firmware Files:

1. Click on the Search box available top right corner of the webpage.
2. Type your desired model number.
3. Click on the search result below.
4. Read the post you will get the download link.
5. If your desired model is not shown in the search results then comment.

Visit my Youtube Channel and watch several video tutorials for a better understanding.

SONY LCD LED TV Software Collection

SONY LCD LED TV is widely used in the world. Each and Every SONY LED TV has its specific program or firmware/software installed in its motherboard by which the tv functions can be operated. Sometimes, In some cases led tv stops working due to technical reasons and is not properly displayed, or the standby light remains red/blue. If the TV did not start normally then we need to reprogram the LED TV with its specific firmware/software.

It is very necessary for us to have the backup dump of that LED TV to restore the tv to normal condition. So, here are some backup dump files of SONY LED TV firmware for free Download to support the technicians. Download free SONY bin files for your LCD/LED TV.

All following given firmware of Sony LCD LED TV is saved with programming tool and can be loaded into tv with the programmer. Each LED TV Model has its own specific Software File that you can download for a specific model. It is advised to all beginners that first save the backup of the old software before installing new software or remove the original flash IC and load the software in a new flash ic then mount it. In case of any trouble, you can replace back the original flash ic to avoid any issues.

Sony LCD LED TV boards do not have the option of Mirroring/Flip or inverting the function setting of the panel. So, if the picture is inverted or flipped then you should load the software of the upside-down picture. Some software in the given list is bifurcated and some or not. you may check it by yourself if you face such types of problems during the software installation.

In some cases, the main motherboard is the same but the channel scanning issue is observed. It is because the different tuner is mounted on the same board. So, you need to first verify the tuner ic part number to load the proper firmware.

Note: 

All software files are saved from working Sony LCD LED TVs with the help of the Programming tool and can be loaded or written by the programmer. Some firmware files are USB upgradeable.

Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/Installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Sony LCD LED TV Firmware Files:

1. Click on the Search box available top right corner of the webpage.
2. Type your desired model number.
3. Click on the search result below.
4. Read the post you will get the download link.
5. If your desired model is not shown in the search results then comment.

visit my Youtube Channel and watch several video tutorials for a better understanding.

TP.V56.PB842 LED TV Board

TP.V56.PB842 is an analog LCD/LED TV ATV control card that is designed especially for Asian countries and the Middle East as well. TP_V56_PB842 is a combo card that is designed for the power supply unit and Inverter board with ATV Module three in one embedded board. This board supports 28 to 39-inch screens up to a resolution of 1920×1080. Its USB interface can support software upgrades and multimedia playback as well. TP.V56.PB842 firmware files are given below for technician support.

General Specifications:

Brand/Mark: China Universal

Model: TP.V56.PB842

Main Chipset: TSUMV56RUU-Z1

Tuner Chip: R842

Product: LED TV Driver Board

Resolution: Up to 1920×1080

Panel: 28″ to 39″

Panel voltage: 12V

Backlight Adjust: Yes

Mirror Mode: Yes

Input Supply: 220V AC

Backlight: 600mA 75w

Speaker Output: 2x5W

Service Mode:

Source/Input 2580

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download TP.V56.PB842 Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

TP.V56.PB842 Firmware Collection Free Download:

For video tutorials, visit my youtube channel.