Tag Archives: kazmi elecom

TP.V56.PB832 LED TV Board

TP.V56.PB832 is an analog LCD/LED TV ATV control card that is designed especially for Asian countries and the Middle East as well. TP_V56_PB832 is a combo card that is designed for the power supply unit and Inverter board with ATV Module three in one embedded board. This board supports 28 to 32-inch screens up to resolution 1920×1080. Its USB interface can support software upgrades and multimedia playback as well.

General Specifications:

Brand/Mark: China Universal

Model: TP.V56.PB832

Main Chipset: TSUMV56RUU-Z1

Tuner Chip: R842

Product: LED TV Driver Board

Resolution: Up to 1920×1080

Panel: 28″ to 32″

Panel voltage: 12V

Backlight Adjust:

Mirror Mode:

Input Supply: 220V AC

Backlight: 72-82V 350mA

Speaker Output: 2x5W

Service Mode:

Source/Input 2580

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

Here are below some TP.V56.PB832 firmware files for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

TP.MS1306.PB771 LED TV Board

Model No. TP.MS1306.PB771 MS306PS (Combo Board)

Main Chipset: MSD1306XS-Z1

LED Backlight: 36-42v 600mA

Display Format: up to 1920×1080

Panel Supported: 24″ t0 32″

Aspect Ratio: 4:3, 16:9 & 16:10

MS306PS General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: 12V DC Default

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC 220V

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Note: The following is given MS306PS firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download MS306PS Firmware files:

Download the following given MS306PS firmware and then extract you will get the folder. Now load the file by the programmer. For More Detail about the download, process watch the video Click Here

TP.MS1306.PB771 MS306PS Firmware Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

M3663.03B Digital Universal Board

Basic Info:

Model No. M3663.03B

Main Chipset: MSD3663LU

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Screen Supported: 8.9-28 inch

Digital Signal: DVB-T2/DVB-T/DVB-C

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: single/dual 8bit LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (4 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt, 4 Amp

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Firmware Name: 3663LU_03B.bin

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Note: Following M3663.03B firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware.

How to Download M3663.03B Firmware Files:

Download all parts of the following M3663.03B firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

M3663.03B Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV9632-AH 4K Smart Android Board

CV9632-AH is an analog and digital 4K UHD smart android board with a resolution of 3840×2160 supported smart android board with the latest android version of 9.0 pie. CV9632_AH is a universal without a backlight driver circuit and power supply module. CV9632.AH can support many panel screens from 15.6 inches to 85 inches with the best picture quality. CV9632-AH has multiple connectivity ports like AV, three HDMI, USB, and Digital Tuner input (DVB T/T2, S/S2). Its special features are the E-Share, Mirroring option, WiFi support, and inbuilt Apps. CV9632-AH firmware files are given below for the technician’s support.

General Specifications & Features :

Brand/Make: LCD/LED 4K Smart Driver Board

Model: CV9632-AH

Supported Resolution: 3480×2160

Screen Format: 16:9

Chipset: MT9632

Platform: M7332

Operating System: Android 9.0

CPU: Cortex A53*4 64bit

GPU: G52(2EE)MC1

RAM: 1.5Gb

ROM: 8Gb

Sound Output: 10Wx2

Transmission: DVB-T/T2/S2

Video System: PAL/SECAM

Backlight Voltage: NA

Backlight Current: NA

Backlight Power: NA

AC Input: NA

Firmware Name: CtvUpgrade.bin

Firmware Type: USB Upgradeable

Service Menu Code:

Product: Magic

Note: The following is given software for Technician’s support. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware Files:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

Here are CV9632-AH firmware files for free download:

TP.SK508S.PB802 Smart Android Board

TP.SK508S.PB802 is an android network driver smart led tv board with an FHD resolution of 1920×1080. TP_SK508S_PB802 has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain Full HD Wide Screen with better to work SMART. TP SK508S PB802 Smart Board has multiple ports of A/V, USB interface Ports, and many HDMI ports as well in addition to the VGA interface for computers. TP-SK508S-PB802 has a LAN/RJ45 Connector interface port also for the wired internet network.

TP.SK508S.PB802 is a Combo Network Triple play board that has the Digital TV tuner built-in in it (DTMB/DVB-C/ATSC/ISDB-T). The Graphics and Sound quality of the TP-SK508S-PB802 android board are very good and the Response rate is very efficient. TP_SK508S_PB802 china smart network board can support up to 43″ LED Panels. TP.SK508S.PB802 firmware file is available for the technician’s support.

General Specifications:

Brand/Mark: Main Board (Android WIFI Network Drive Smart Board)

Main Board: TP.SK508S.PB802

Main Chipset: Hi3751V350

Operating System: Android 9

CPU: Arm Cortex A53*4

GPU: MaliT470MP3

CPU Frequency: 1000-1300MHZ

GPU Frequency: 550MHz

Backlight: 600mA 48W

RAM: 1GB

ROM: 8G

Resolution: up to 1920×1080

Screen Size supported: 15.6 to 43 Inch

Audio Output power: 2x8W

Mirror Mode: Yes

Logo Change: Yes

Tuner: R842

Input Voltage: 200-240V AC

Firmware Name: allupgrade_V3510D0N_8G_1G_75.bin

Firmware Type: USB Upgrade

Note The following given Software/firmware is a USB Boot file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download TP.SK508S.PB802 Firmware Files:

Download all parts of the following given firmware/Software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

Here is below TP.SK508S.PB802 firmware file for free download:

CV6681-K24 Smart Android Board

CV6681-K24 is an Android network driver smart LED TV board with an FHD resolution of 1920×1080. CV6681_K24 has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain Full HD Wide Screen with better-to-work SMART. CV6681 K24 Smart Board has multiple ports of A/V, USB interface Ports, and many HDMI ports as well in addition to SCART. VGA interface is not available on this board. CV6681-K24 has a LAN/RJ45 Connector interface port for the wired internet network.

CV6681.K24 is a Combo Network Triple play board that has a Digital TV tuner built-in in it (digital terrestrial receiver). The Graphics and Sound quality of the CV6681.K24 Android board are very good and the Response rate is very efficient. CV6681.K24 China smart network board can support up to 32″ LED Panels. CV6681.K24 firmware file is available for the technician’s support.

General Specifications:

Brand/Mark: LCD/LED Main Board (Android WIFI Network Drive Board)

Main Board: CV6681H-K24

Main Chipset: CV9632-CV6681

OS: Android 9.0

CPU: Multi Core Arm Cortex A53 64-bit

GPU: Multi-Core Mali-T450

CPU Frequency: 1.2GHz

GPU Frequency: 432MHz

Back Light V/C : 00mA

Ram: 1Gb

Rom: 8 Gb eMMC

Resolution: up to 1920×1080

Speakers: 2 x 8W

RF connectivity X 1
HDMI X 2
USB X 1
YPbPr X 1
HEADPHONES X 1
Scart 1
RJ45 X 1

Tuner: ATV&DTV

Firmware: CtvUpgrade.bin

Firmware Type: USB Updateable Firmware

Firmware Installation Guide: Click Here

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware.

How to Download CV6681-K24 Firmware Files:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

How to Load Software:

1. Transfer the required resolution file into a USB Disk
2. Plugin the USB Disk into the Main Board
3. Keep Pressing the Standby/Power button and Power on the board
4. Wait until the LED light starts flashing
5. Note: The USB file must be the name “CtvUpgrade.bin”

CV6681-K24 firmware for free download:

• CV6681.K24 1366×768 HYUNDAI-24.part1
• CV6681.K24 1366×768 HYUNDAI-24.part2
• CV6681.K24 1366×768 HYUNDAI-24.part3
• CV6681.K24 1920×080 HARTENS-22.part1
• CV6681.K24 1920×080 HARTENS-22.part2
• CV6681.K24 1920×080 HARTENS-22.part3

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TP.HV553.PB801 Android Smart Board

TP.HV553.PB801 is an Intelligent smart 4K network driver LED TV board with a support resolution of 3840×2160. TP_HV553_PB801 is dedicated to 60 Hz screens. It is a combo board. Smart UHD TV With Android Platform and great features to entertain ultra HD Wide Screen with better to work SMART. TP-HV553-PB801 has the full features of input interface connectivity. It has multiple ports like HDMI, AV, Headphones, VGA interface, USB ports, and RJ45 Ethernet port for wired internet connectivity. Its USB interface can be used for Firmware upgrades as well as for multimedia playback.

TP HV553 PB801 is a digital and analog TV board, it can receive analogtelevision (PAL/SECAM/NTSC) and digital television (DVB-T/T2/C/S) signals. TP.HV553.PB801 Firmware file is given below for Technician’s support.

General Features & Specifications:

Brand/Make: LCD/LED 4K Smart Driver Board

Model: TP.HV553.PB801

Supported Resolution: 3840×2160 UHD 4K

Screen Format: 16:9

Chipset: hi3751v553

Operating System: Android 9.0

CPU: A73*2 Dual-core 800Mpbs

GPU: Mali-450*4

RAM: 1GB DDR3

ROM: 8Gb

Sound Output: 8Wx2

Backlight Current: 600mA

Tuner: SI2159

RF TUNER: DVB-T/T2/C/S/S2/(S/S2 option)

Video System: PAL/SECAM/NTSC

Power Input: 100-240 ~ 50/60Hz

Power Consumption: 115W (may be different according to panel)

Standby Power: 0.5W

Note: The following given software for Technician’s support. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download TP.HV553.PB801 Firmware Files:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.HV553.PB801 firmware file for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Smart LED TV Mstar Android Recovery. Recover Boot Loop Smart LED TV without Loading Software

T.V53.816 LED TV Board

T.V53.816 FHD three in one LCD/LED TV Driver Card for LED Display Screen 26″ to 32″. T.V53.816 can support up to 1920×1080 screen panel resolution. The USB interface can be used for software Upgrades and Multimedia Playback functions. T-V53-816 is specially designed for the Middle East and Asian Countries.

Basic Info:

Model No. T.V53.816 (Combo Board)

Main Chipset: TSUMV53

LED Backlight: 25W

Display Format: 1080 Full HD

Panel Supported: 26″ to 32″

Aspect Ratio: 16:9

Wide Screen: Yes

Backlight: LED

Display: TFT-LCD

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Language OSD: English,Hindi,Simplified ,Chinese,Khmer,Myanmar,French,German,Italian,Spanish

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohms)

Max. Resolution: 1920×1080

Panel Voltage:  12V, 5V

Backlight: 48W 12V/19V 30V-44V/25W 2PIN-2.0+3PIN-2.0 or 2PIN-2.0+2PIN-2.0
48W 12V/24V 45V-63V/25W
48W 12V/32V 64V-94V/25W
48W 12V/19V 34V-54V/25W

USB Port: USB interface for Firmware Upgrade and Multimedia Playback Support

Note: External DC 12V Power Jack is also available on this board

Electrical Parameters:

Working Input Voltage: 100-240V AC

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Factory Service Mode:

Menu+1147

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here are below T.V53.816 Firmware  for Free Download Here :

TP.MS3663S.PA672 Universal Board

TP.MS3663S.PA672 is a combo HD&FHD DVB LED TV non-smart Board. It has a supported FHD resolution of 1920×1080 and a Refresh Rate is 50/60 hertz with a smooth motion rate of 200 SMR. It has multiple HDMI ports to connect a set-top box, Blu Ray players, gaming console, and also have more than one USB port to connect hard drives and other USB devices and play multimedia as well. It has a Dolby Sound system that Supports 16 Watts sound output and HDR Display viewing. TP-MS3663S-PA672 can support multiple LCD/LED panels. TP_MS3663S_PA672 firmware files are given below for free of cost download to support technicians.

General Features and Specifications:

Brand/Mark: China Universal

Model: TP.MS3663S.PA672

Main Chipset: MSD3663LSA

Product: LED TV

Resolution: 1920×1080

Panel: 32 to 40 Inch

Backlight: 35-57V 25W

HDMI Ports: 2

Component: Yes

Tuner: 2

USB Ports: 1

VGA Port: Yes

Scart: Yes

SPI Flash: 25Q64

DTS Studio Sound™ Yes

Analog Audio Out AV Out

Digital Audio Out (SPDIF) Yes

Service Code: 8899

Firmware Type: Backup Dump

Firmware Name:

Note The following given firmware is USB bootable and dumps backup files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download TP.MS3663S.PA672 firmware files:

Download the following given firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

TP.MS3663S.PA672 firmware files free download:

1366x768_DREAMAX_DUMP

1920x1080_DEXP_DUMP

TP.MT5510S.PB818 Smart Android Board

TP.MT5510S.PB818 is an android network driver smart led tv board with an FHD resolution of 1920×1080. TP_MT5510S_PB818 has a powerful wifi system. Smart FHD TV With Android Plateform and great features to entertain Full HD Wide Screen with better to work SMART. TP MT5510S PB818 Smart Board has multiple ports of A/V, SCART, USB interface Port, and Dual HDMI ports as well. TP-MT5510S-PB818 has a LAN/RJ45 Connector interface port also for the wired internet network.

TP.MT5510S.PB818 is a Combo Network Triple play board. The Graphics and Sound quality of the TP-MT5510S-PB818 android board are very good and the Response rate is very efficient. TP_MT5510S-PB818 china’s smart network board can support up to 32 inches to 39-inches LED Panels. TP.MT5510S.PB818 firmware file is available for the technician’s support.

General Specifications:

Brand/Mark: Main Board (Android WIFI Network Drive Smart Board)

Main Board: TP.MT5510S.PB818

Main Chipset: MT5659DHMT or MT5659DHNT

Operating System: Android 7.0

CPU: ARM Cortex-A53 quad-core 804MHz

GPU: Mali-450 Dual-Core 432MHZ

RAM: 1Gb

ROM: 8Gb

Back Light: 48w 600mA

Resolution: up to 1920×1080

Screen Size supported: 24 to 40 Inch

Audio Output power: 2x8W

Video System: PAL, SECAM, NTSC

DTV Transmission: DVB-T/C/T2/S/S2

Input Voltage: 100-240V AC

Firmware Name: allupgrade_5510_8G_1G_ref56_6022.pkg

Firmware Type: USB Updateable Firmware

Note: The following given Software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download TP.MT5510S.PB818 Firmware Files:

Download all parts of the following given Software/firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here is below TP.MT5510S.PB818 firmware file for free download: