Tag Archives: kazmi elecom

IRBIS T39Q77FDL LED TV

IRBIS T39Q77FDL is a 39 inches HD Ready LED TV with a resolution of 1366×768. T39Q77FDL is a non-smart tv. T39Q77FDL led TV has all the latest features and connectivity ports as HDMI port and USB port, Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1.

Its view angle is IRBISal: 170 degrees and vertical: 160 degrees. T39Q77FDL has additional edge led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2 and response time is 5 ms. IRBIS Software file is given below for the technician’s support. For more IRBIS Software collection visit here.

General Specifications & Features:

Make: IRBIS

Model: T39Q77FDL

Display Size: 39″

Storage Memory: MB

HD Technology: HD

Panel: HD

No of HDMI Ports:

No of USB Ports:

No of AV Ports:

Speaker Output RMS:

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: W, 0.5 W (Standby)

Software Type: Backup Dump

Software Name:

Main Board:

Note: Following given Software is backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the Software.If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

IRBIS T39Q77FDL Software Free Download.

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CVMV26L-A-20 LCD TV Board

CVMV26L-A-20 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Russia, Asia Pacific, and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is builtin into this motherboard (Optional for some regions). This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CVMV26L-A-20 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CVMV26L-B-20

Main Chip: TSUMV26KE-LF

Product: LCD LED TV

LED Backlight: mA

Flash IC:  25F40

EEPROM: 24C32

Sound Chip:

Tuner IC: F21WT-3BAR-EMb

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 3.3V,5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

CVMV26L-A-20 firmware for free download:

• CVMV26L.A.20 DAEWOO 24 Backup Dump
• CVMV26L.A.20 FUSION 15 Backup Dump
• CVMV26L.A.20 ORION 15 Backup Dump
• CVMV26L.A.20 SUPRA STV-LC1522WD Backup Dump
• CVMV26L.A.20 SUPRA STV-LC1617W Backup Dump
• CVMV26L.A.20 SUPRA STV-LC1626WD Backup Dump
• CVMV26L.A.20 SUPRA STV-LC2217F Backup Dump
• CVMV26L.A.20 SUPRA STV-LC2222WD Backup Dump
• CVMV26L.A.20 SUPRA STV-LC2417F Backup Dump
• CVMV26L.A.20 SUPRA STV-LC2422WD Backup Dump

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.MS18VG.A1B LED TV Board

T.MS18VG.A1B is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 18-inch to 24-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. T.MS18VG.A1B has multiple HDMI ports that support 1.4 and its HDCP support 1.1. T_MS18VG_A1B is compatible with Non-HD and FHD LCD/LED panel screens. T-MS18VG-A1B is widescreen-supported and also has a multi-language option. T.MS18VG.62B has its special feature of  AV. T.MS18VG.A1B software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: T-MS18VG.A1B

Main Chipset: Mstar MST6M182VG

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC 12 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MS18VG.A1B Firmware Collection Free Download:

• T-MS18VG-A1B 1366x768_LG_DUMP
• T-MS18VG-A1B 1366x768_SAMSUNG-SONY_DUMP
• T-MS18VG-A1B 1920x1080_RISUN_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.MSD306.23A LED TV Board

T.MSD306.23A is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.T.MSD306.23A-11092 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: T.MSD306.23A 11092

Main Chip: MSD306PT-LF-Z1

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip: YD1517P

Tuner IC:  DT82WT-3R-E

Screen supported: 18-32 inches

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Type: Backup Dump

Service Code:

Menu 1147

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MSD306.23A firmware for free download:

• T-MSD306-23A 1366x768_NPG_DUMP
• T-MSD306-23A 1920x1080_DIKOM_DUMP
• T-MSD306-23A 1920x1080_SENCOR_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV182H-K LED TV Board

CV182H-K is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Russia, Asia Pacific, and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like multi HDMI inputs, USB interface, PC input, Component Input, TV, and Scart. CV182H-K firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV182H-K

Main Chip: MST6M181/182

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip: TPA3110D2

Tuner: F03WT-3DDR-E

Screen supported: 26 to 42 inches

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input 2580

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

CV182H-K firmware for free download:

• CV182H_K 1366X768_FUSION_DUMP
• CV182H_K 1366X768_SUPRA_DUMP
• CV182H_K 1920x1080_SUPRA_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.MSD306.2B LED TV Board

T.MSD306.2B is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.T.MSD306.2B-10216 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: T.MSD306.2B 10216

Main Chip: MSD306PT-LF-Z1

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip: YD1517P

Tuner IC:  DT82WT-3R-E

Screen supported: 18-32 inches

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Type: Backup Dump

Service Code:

Source/Input

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MSD306.2B firmware for free download:

• T-MSD306-2B 1366x768_SHIVAKI_DUMP
• T-MSD306-2B 1366x768_UNIONTECH_DUMP
• T-MSD306-2B 1920x1080_BLAUPUNKT_DUMP
• T-MSD306-2B 1920x1080_MEDION_DUMP
• T-MSD306-2B 1920x1080_SENCOR_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

TCL L43P6US 4K LED TV

TCL L43P6US Software Update is given below for the technician’s support.

Main Board: MS6586, MS86H, 40-MS86H1-MAC2HG

Software Version: V8-S586T02-LF1V102

Board Type: Smart, 4K

Display Format: 2160P (UHD)

Technical Specifications:

Chassis: MS6586

Resolution Supported: 3840×2160

CPU: Quad-Core

CPU Frequency: GHz

GPU: MALI450

GPU Frequency: MHz

RAM:  GB DDR3

ROM: 8 GB

Operation System: Smart

Audio Output: 20W

Tuner:

Power Supply: AC 110V-240V 50/60Hz

Power Consumption: 150W

Power Consumption: ﹤0.5W  （Standby）

Firmware Name: Update.rar

Firmware Type: USB Boot Update Version

Product Users: TCL, THOMSON, Hitachi, Toshiba

Note: Following the given TCL L43P6US Software Update is USB upgradeable while the TV is working normally. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. You should first check the mainboard number then the hardware id then the software version then you can load it. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download TCL V8-S586T02-LF1V102 Firmware Files:

Download your required version and then extract it you will get the folder. Now copy the bin file to USB. for More Detail about the download process watch the video Click Here

TCL L43P6US Software Update file for free download;

• TCL-L43P6US-Update.part1
• TCL-L43P6US-Update.part2
• TCL-L43P6US-Update.part3

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T56U11.24 Universal Board

T56U11.24 is a universal jumper board with multi-remote and resolution software.

Basic Info:

Model No. T56U11.24

Main Chipset: UTS6710-X

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner: Yes

Sound:

SPI Memory: 25Q32 (4Mb)

Multi Resolution Codes

General Specifications:

TV System: Optional

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Games: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take a max half min to upgrade firmware)

Factory Service Mode:

Source/Input+208

Multi-Resolution Code:

• INPUT/SOURCE 031187 FOR 1920X1080 Default
• INPUT/SOURCE 031181 FOR 1366X768
• INPUT/SOURCE 031183 FOR 1280X1024
• INPUT/SOURCE 031184 FOR 1440X900
• INPUT/SOURCE 031185 FOR 1600X900
• INPUT/SOURCE 031186 FOR 1680X1050
• INPUT/SOURCE 031182 FOR 1024X768

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software.

T56U11.24 Software Free Download:

• T56U11_24_Multi-Resolution_Software

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.VST29.61C LED TV Board

T.VST29.61C is a universal LCD/LED TV non-combo controller board with multiple interfaces like dual AV, dual USB, HDMI, VGA, and SCART input. If you are facing any issues during firmware installation then visit and read here first.

Basic Info:

Model No. T.VST29-61C 12296

Main Chipset: TSUMV59XE-Z1

Trademark: Leroy

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software.

T.VST29.61C firmware for free download:

• T-VST29-61C 1366x768_GOLDSTAR_DUMP
• T-VST29-61C 1366x768_SUPRA_DUMP
• T-VST29-61C 1920x1080_GOLDSTAR_DUMP
• T-VST29-61C 1920x1080_SUPRA_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.SP7050.10A LED TV Board

T.SP7050.10A is a simple ATV Driver Motherboard designed for LCD TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but the ATV Card is builtin into this motherboard. It has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.T.SP7050.10A 9503 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: T.SP7050.10A 9503

Main Chip: SUNPLUS SPHE1003A

Product: LCD TV

LED Backlight: mA

Flash IC: 1Mb & 2Mb

SPI Flash: 1M – U11
SPI Flash: 2M – U24

Sound Chip: YD1517P

Tuner IC: CDT-SFT338-40

Screen supported: 15-24 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input+

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.SP7050.10A firmware for free download:

• T-SP7050-10A 1366x768_TOKAI_DUMP
• T-SP7050-10A 1920x1080_SHINCO_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.