Tag Archives: kazmi elecom

T.MS18VG.72B LED TV Board

T.MS18VG.72B is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which have a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. T_MS18VG_72B has multiple HDMI ports support 1.4 and its HDCP support 1.1. T.MS18VG.72B is compatible with Non-HD and FHD LCD/LED panel screens. T.MS18VG.72B 12023 is widescreen-supported and also has a multi-language option. T.MS18VG.72B has its special feature of  AV.T.MS18VG.72B software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: T-MS18VG-72B 12023

Main Chipset: TSUMV59

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Service Menu: Menu 1147

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MS18VG.72B firmware for free download:

• T-MS18VG-72B 1366x768_BEUSAT_DUMP
• T-MS18VG-72B 1366x768_SUPRA_DUMP
• T-MS18VG-72B 1920x1080_SANYO_DUMP
• T-MS18VG-72B 1920x1080_SUPRA_DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ZP.VST.V56RU.P813 LED TV Board

ZP.VST.V56RU.P813 is an analog LCD/LED TV Motherboard that is suitable for the Asia Pacific and the Middle East countries. ZP_VST_V56RU_P813 is a triple board which is a backlight driver inverter, power supply unit, and ATV module built into a single printed circuit board. Its USB interface/port can be used for multimedia playback and for updating programs as well. It has all the connectivity interfaces as per user requirements like HDMI, AV, VGA, RF, USB, Headphones, etc. ZP-VST-V56RU-P813 firmware files are shared in this post for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: ZP.VST.V56RU.P813

Main Chipset: V56

Product: LED TV

Resolution: Up to 1920×1080

Backlight: 70v / 466mA , 90v / 500mA

Flash Size: 4Mb

Service Code: Menu+1147

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

ZP.VST.V56RU.P813 firmware for free download:

• ZP-VST-V56RU-P813_1366x768_Samsung_Dump
• ZP-VST-V56RU-P813_1366x768_Sony_Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

B.SPC81B-1 LCD TV Board

B.SPC81B-1 is a universal LCD driver Board that has HD resolution Supported up to 1366×768. B.SPC81B-1 is a non-combo board which means the main power supply and LCD backlight driver board are required separately while the ATV module and sound card are built in. It can support 15-inch to 24-inch LCD screen panels. The firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: B.SPC81B-1 9245, B.SPC81B-1 1132

Main Chip: TDA15021

TV System: PAL\SECAM\NTSC PLAYBACK

Product: LCD TV

Input Voltage: 12V DC

MAX Backlight Watt: NA

Backlight Current: NA

Resolution: up to 1366×768

Flash size: 1 MB

EEPROM: 24C64

AUDIO: 1517

Tuner: TDQ-6F6/T1260W, ET6T1E-LF-108W-A

Service Menu:

Source

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

B.SPC81B-1 firmware for free download:

• B-SPC81B-1 9245 AKAI 16
• B-SPC81B-1 9245 BBK 24 + DVD
• B-SPC81B-1 9245 FUSION 19
• B-SPC81B-1 9245 FUSION 22
• B-SPC81B-1 9245 IZUMI 19
• B-SPC81B-1 9245 IZUMI 22
• B-SPC81B-1 9245 MEDION 20
• B-SPC81B-1 9245 ORION 15
• B-SPC81B-1 9245 ORION 22
• B-SPC81B-1 9245 SUNNY 22
• B-SPC81B-1 9245 SUPRA 22
• B-SPC81B-1 9245 TVE 19

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

B.TR901C LCD TV Board

B.TR901C is a universal LCD driver Board that has HD resolution Supported up to 1366×768. B-TR901C is a non-combo board which means the main power supply and LCD backlight driver board are required separately while the ATV module and sound card are built in. The firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: B-TR901C 7355, B-TR901C 7293, B-TR901C 7275,

Main Chip: TDA15021

TV System: PAL\SECAM\NTSC PLAYBACK

Product: LCD TV

Input Voltage: 12V DC

MAX Backlight Watt: NA

Backlight Current: NA

Resolution: up to 1366×768

Flash size: 1 MB

EEPROM: 24C64

AUDIO:

Tuner: DTT-8A1C/T1146, TDQ-6F6/T1260W

Service Menu:

Source

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

B.TR901C firmware for free download:

• B-TR901C 7355 BLUSENS 32
• B-TR901C 7355 HORIZONT 32
• B-TR901C 7355 MUSTEK 37
• B-TR901C 7355 ORION 32
• B-TR901C 7355 WESTINGHOUSE 32

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MSD309.BA6S LED TV Board

T.MSD309.BA6S is a simple ATV#DTV Driver Motherboard designed for LCD/LED TVs. T_MSD309_BA6S board is suitable for the Asia Pacific and the Middle East markets.T-MSD309-BA6S is a non-Combo Board. The main power module, LED Backlight Inverter Circuit is required and an ATV Card is built into the motherboard. T MSD309 BA6S has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.T-MSD309-BA6S firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: T.MSD309.BA6S

Main Chip: MSD309

Product: LED TV

LED Backlight: NA

Flash IC: 8Mb

Screen supported: 32-50 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 12v

Sound Chipset:

Tuner: XDTT (Dual Tuner)

Bin Name: CVT_309B.bin

Software Type: USB & Backup Dump

Service Code:

Menu 1147

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MSD309.BA6S firmware for free download:

• T-MSD309-BA6S 1366x768_STARLIGHT_USB
• T-MSD309-BA6S 1366x768_BLAUPUNKT_USB
• T-MSD309-BA6S 1366x768_STARLIGHT_DUMP
• T-MSD309-BA6S 1366x768_BLAUPUNKT_DUMP
• T-MSD309-BA6S 1920x1080_CONDOR_DUMP
• T-MSD309-BA6S 1920x1080_BLAUPUNKT_DUMP
• T-MSD309-BA6S 1920x1080_GOLDVISION_DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

VS.T596_V3.1-8 Universal Board

VS.T596_V3.1-8 is a Universal LCD/LED Driver Board.

Basic Info:

Model No. VS.T596_V3.1-8

Main Chipset: TSUMMV29LU/V59

Tuner:

Display Format: up to 1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

INPUT
MENU

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T596_V3.1-8 Firmware All resolutions Free Download :

• VS.T596_V3.1-8

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

VS.T596_V3.0-8 Universal Board

VS.T596_V3.0-8 is a Universal LCD/LED Driver Board.

Basic Info:

Model No. VS.T596_V3.0-8

Main Chipset: TSUMMV29LU

Tuner:

Display Format: up to 1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

INPUT
MENU

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T596_V3.0-8 Firmware All resolutions Free Download :

• VS.T596_VV3.0-8

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

VS.T596_V2.2-5 Universal Board

VS.T596_V2.2-5 is a Universal LCD/LED Driver Board.

Basic Info:

Model No. VS.T596_V2.2-5

Main Chipset: TSUMMV29LU/TSUMV59XU-Z1

Tuner:

Display Format: up to 1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

INPUT
MENU

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T596_V2.2-5 Firmware All resolutions Free Download :

• VS.T596_V2.2-5

For video tutorials, visit “Kazmi Elecom” my youtube channel.

VS.T596_V1.3 Universal Board

VS.T596_V1.3 is a Universal LCD/LED Driver Board.

Basic Info:

Model No. VS.T596_V1.3

Main Chipset: TSUMMV29LU/TSUMV59XU-Z1

Tuner:

Display Format: up to 1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

INPUT
MENU

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T596_V1.3 Firmware All resolutions Free Download :

• VS.T596_V1.3

For video tutorials, visit “Kazmi Elecom” my youtube channel.

VS.T596_V1.2 Universal Board

VS.T596_V1.2 is a Universal LCD/LED Driver Board.

Basic Info:

Model No. VS.T596_V1.2

Main Chipset: TSUMMV29LU

Tuner:

Display Format: up to 1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

INPUT
MENU

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T596_V1.2 Firmware All resolutions Free Download :

• VS.T596_V1.2

For video tutorials, visit “Kazmi Elecom” my youtube channel.