Tag Archives: kazmi elecom

VS.T596_V1.1 Universal Board

VS.T596_V1.1 is a Universal LCD/LED Driver Board.

Basic Info:

Model No. VS.T596_V1.1

Main Chipset: TSUMMV29LU

Tuner:

Display Format: up to 1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

INPUT
MENU

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T596_V1.1 Firmware All resolutions Free Download :

• VS.T596_V1.1

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.MSD309.BA1B LED TV Board

T.MSD309.BA1B is a simple ATV Driver Motherboard designed for LCD/LED TVs. T_MSD309_BA1B board is suitable for the Asia Pacific and the Middle East markets.T-MSD309-BA1B is a non-Combo Board. The main power module, LED Backlight Inverter Circuit is required and ATV Card is builtin into the motherboard. T MSD309 BA1B has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.T-MSD309-BA1B firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: T.MSD309.BA1B

Main Chip: MSD309

Product: LED TV

LED Backlight: NA

Flash IC: 4Mb

Screen supported: 32-50 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 12v

Sound Chipset:

Tuner: XDTT

Bin Name: CVT_309B.bin

Software Type: USB & Backup Dump

Service Code:

Menu 1147

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MSD309.BA1B firmware for free download:

• T-MSD309-BA1B 1366x768_SNOWA_USB
• T-MSD309-BA1B 1366x768_SUPRA_DUMP
• T-MSD309-BA1B 1920x1080_MGS_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV181L-A LED TV Board

CV181L-A is an analog LCD/LED TV driver motherboard that is designed for Asian markets. CV181L_A is designed with different properties and features to support the different sizes of panel screens. CV181L-A is not a combo card which means a separate power supply module will be required to operate this board. CV181L A has multiple input ports like HDMI, VGA input, USB, AV-IN, AV-OUT, etc. Some boards have a dual AV input interface and Scart with an extension board.

General Specifications:

Board Make: China

Board Model:  CV181L-A-20 110401d, CV181L-A-11 101203c

Main Chipset: Mstar MST6M181/182

Audio Amp: YD1517P

Tuner: CDT-35P512-37

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC 12 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB, 1MB(DVD)

Firmware Type: Backup Dump

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

CV181L-A Firmware Collection Free Download:

• CV181L_A 1366x768_FUSION_DUMP
• CV181L_A 1366x768_HYUNDAI_DUMP
• CV181L_A 1366x768_ORION_USB
• CV181L_A 1366x768_SUPRA_DUMP
• CV181L_A 1920x1080_DENVER_DUMP
• CV181L_A 1920x1080_FUSION_DUMP
• CV181L_A 1920x1080_HYUNDAI_DUMP
• CV181L_A 1920x1080_ORION_DUMP
• CV181L_A 1920x1080_STILUX_DUMP
• CV181L_A 1920x1080_SUPRA_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.MS18VG.71A LED TV Board

T.MS18VG.71A is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 32-inch to 46-Inches LED panels which a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. T.MS18VG.A1B has multiple HDMI ports that support 1.4 and its HDCP support 1.1. T_MS18VG_71A is compatible with Non-HD and FHD LCD/LED panel screens. T-MS18VG-71A is widescreen-supported and also has a multi-language option. T.MS18VG.71A has its special feature of  AV. T.MS18VG.71A software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: T-MS18VG.71A

Main Chipset: Mstar MST6M182VG

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC 12 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MS18VG.71A Firmware Collection Free Download:

• T-MS18VG-71A 1366x768_SUPRA_DUMP
• T-MS18VG-71A 1920x1080_SUPRA_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

B.TD604C LCD TV Board

B.TD604C is a universal LCD driver Board that has SD resolution Supported up to 1440. B-TD604C 7063 is a non-combo board which means the main power supply and LCD backlight driver board are required separately while the ATV module and sound card are built in. The firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: B.TD604C 7063

Main Chip: TDA15021H/N1C00

TV System: PAL\SECAM\NTSC PLAYBACK

Product: LCD TV

Input Voltage: 12V DC

MAX Backlight Watt: NA

Backlight Current: NA

Resolution: up to 1400×1050

Flash size: KB

EEPROM: 24C16, 24C02

AUDIO: TDA1517P

Tuner: TDQ-6F6/T126CW

Service Menu:

Source

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

B.TD604C firmware for free download:

• B-TD604C 7063 All

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV182L-B LED TV Board

CV182L-B is a universal LCD/LED Board that has Full HD resolution Supported up to 1920×1080. CV182L_B is a non-combo board which means the main power supply and LED backlight driver board are required separately while the ATV module and sound card are built in. The firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: CV182L-B

Main Chip:

TV System: PAL\SECAM\NTSC PLAYBACK

Product: LED TV

Input Voltage: 12V DC

MAX Backlight Watt: NA

Backlight Current: NA

Resolution: up to 1920×1080

Flash size: 4 MB

AUDIO: 1517

Tuner: CDT-3SP512-37

Service Menu:

Source 2-5-8-0

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

CV182L-B firmware for free download:

• CV182L_B FUSION-16_DUMP
• CV182L_B FUSION-22_DUMP
• CV182L_B FUSION-24_DUMP
• CV182L_B SUPRA-16_DUMP
• CV182L_B SUPRA-19_DUMP
• CV182L_B SUPRA-22_DUMP
• CV182L_B SUPRA-24_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.MT5310.65B LED TV Board

T.MT5310.65B is an LCD/LED TV Board. It is suitable for the LVDS interface and supports more than 22-32 inches of LED panels, with a maximum resolution of up to 1920*1080. TP_MT5310_65B is a non-combo board i.e. power card, backlight driver module is required separately while an ATV board is built-in into it. T-MT5310-65B has multiple input interface ports like USB, HDMI, AV, Scart port, and VGA port for computer connectivity.

T MT5310 65B for many brands of LED TVs like Orion, JVC, etc. Its USB interface can be used for loading software as well as for playing multimedia files. T.MT5310.65B support for analog TV signals. T.MT5310.65B firmware files are given below for the technician’s support.

General Specifications:

Model: T.MT5310.65B-12016

Main Chipset: MT5310

Resolution Supported: 1920×1080

Flash Memory: 25Q64

Television System: PAL (BG, DK), SECAM (BG, DK, LL)

Tuner: TDTK-G941D

Audio Output Power: 2X6 W (8Ω)

Backlight: mA

Backlight Power: W

Power Input: 12V

Power Consumption: 45W

Service Code: Menu 1147

Firmware Name:

Firmware Type: Backup Dump

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MT5310.65B Firmware files for Free Download:

• T-MT5310-65B 1920x1080_HASSSPREE_DUMP
• T-MT5310-65B 1920x1080_SENCOR_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV182L-A LED TV Board

CV182L-A is a universal LCD/LED Board that has Full HD resolution Supported up to 1920×1080. CV182L.A is a non-combo board which means the main power supply and LED backlight driver board are required separately while the ATV module and sound card are built in. The firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: CV182L-C

Main Chip:

TV System: PAL\SECAM\NTSC PLAYBACK

Product: LED TV

Input Voltage: 12V DC

MAX Backlight Watt: NA

Backlight Current: NA

Resolution: up to 1920×1080

Flash size: 4 MB

AUDIO: 1517

Tuner: CDT-3SP512-37

Service Menu:

Source 2-5-8-0

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

CV182L-A firmware for free download:

• CV182L_A 1366x768_SUPRA_DUMP
• CV182L_A 1920x1080_SUPRA_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.MSD309.B66B LED TV Board

T.MSD309.B66B is a simple ATV Driver Motherboard designed for LCD/LED TVs. T_MSD309_B66B board is suitable for the Asia Pacific and the Middle East markets.T-MSD309-B66B is a non-Combo Board. The main power module, LED Backlight Inverter Circuit is required and ATV Card is builtin into the motherboard. T MSD309 B66B has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.T-MSD309-B66B firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: T.MSD309.B66B

Main Chip: MSD309

Product: LED TV

LED Backlight: NA

Flash IC: 4Mb

Screen supported: 24-46 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 12v

Sound Chipset:

Tuner: XDTT

Service Code:

Source/Input

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MSD309.B66B firmware for free download:

• T-MSD309-B66B 1366x768_BLAUPUNKT_DUMP
• T-MSD309-B66B 1366x768_SHARP_DUMP
• T-MSD309-B66B 1920x1080_BLAUPUNKT_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV206H-C-11 LED TV Board

CV206H-C-11 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Combo Board. The main power module and LED Backlight Inverter Circuit module and ATV Card are builtin into this motherboard. This LED TV Board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. CV206H-C-11 firmware files are given below for the technician’s support. If you are facing some issue during loading or installing firmware files then read here first.

General Specifications:

Brand/Mark: Universal Board

Model: CV206H-C-11

Main Chip:

Product: LED TV

LED Backlight:

Flash IC: 8Mb

Sound IC: TPA3110D2

Tuner: DT70W1-3R-E

Screen supported: 26″, 38.5″

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

CV206H-C-11 firmware for free download:

• CV206H_C_11 1366x768_I-JOY_DUMP
• CV206H_C_11 1366x768_SUPRA_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.