Tag Archives: kazmi elecom

T56U11.24 Universal Board

T56U11.24 is a universal jumper board with multi-remote and resolution software.

Basic Info:

Model No. T56U11.24

Main Chipset: UTS6710-X

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner: Yes

Sound:

SPI Memory: 25Q32 (4Mb)

Multi Resolution Codes

General Specifications:

TV System: Optional

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Games: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take a max half min to upgrade firmware)

Factory Service Mode:

Source/Input+208

Multi-Resolution Code:

• INPUT/SOURCE 031187 FOR 1920X1080 Default
• INPUT/SOURCE 031181 FOR 1366X768
• INPUT/SOURCE 031183 FOR 1280X1024
• INPUT/SOURCE 031184 FOR 1440X900
• INPUT/SOURCE 031185 FOR 1600X900
• INPUT/SOURCE 031186 FOR 1680X1050
• INPUT/SOURCE 031182 FOR 1024X768

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software.

T56U11.24 Software Free Download:

• T56U11_24_Multi-Resolution_Software

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.VST29.61C LED TV Board

T.VST29.61C is a universal LCD/LED TV non-combo controller board with multiple interfaces like dual AV, dual USB, HDMI, VGA, and SCART input. If you are facing any issues during firmware installation then visit and read here first.

Basic Info:

Model No. T.VST29-61C 12296

Main Chipset: TSUMV59XE-Z1

Trademark: Leroy

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software.

T.VST29.61C firmware for free download:

• T-VST29-61C 1366x768_GOLDSTAR_DUMP
• T-VST29-61C 1366x768_SUPRA_DUMP
• T-VST29-61C 1920x1080_GOLDSTAR_DUMP
• T-VST29-61C 1920x1080_SUPRA_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.SP7050.10A LED TV Board

T.SP7050.10A is a simple ATV Driver Motherboard designed for LCD TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but the ATV Card is builtin into this motherboard. It has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.T.SP7050.10A 9503 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: T.SP7050.10A 9503

Main Chip: SUNPLUS SPHE1003A

Product: LCD TV

LED Backlight: mA

Flash IC: 1Mb & 2Mb

SPI Flash: 1M – U11
SPI Flash: 2M – U24

Sound Chip: YD1517P

Tuner IC: CDT-SFT338-40

Screen supported: 15-24 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input+

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.SP7050.10A firmware for free download:

• T-SP7050-10A 1366x768_TOKAI_DUMP
• T-SP7050-10A 1920x1080_SHINCO_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.MSD306.3B LED TV Board

T.MSD306.3B is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.T.MSD306.3B-10196 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: T.MSD306.3B 10196

Main Chip: MSD306

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC: DT82WT-3R-E

Screen supported: 18-24 inches

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Type: Backup Dump

Service Code:

Source/Input

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MSD306.3B firmware for free download:

• T-MSD306-3B 1366x768_SHIVAKI_DUMP
• T-MSD306-3B 1440x900_ORION_DUMP
• T-MSD306-3B 1920x1080_AKAI_DUMP
• T-MSD306-3B 1920x1080_AUDIOSONIC_DUMP
• T-MSD306-3B 1920x1080_BUSH_DUMP
• T-MSD306-3B 1920x1080_ORION_DUMP
• T-MSD306-3B 1920x1080_QUADRO_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

HK-T.RT2959P90 LED TV Board

HK-T.RT2959P90 is a non-smart LCD/LED TV Driver Board. It is suitable for the LVDS interface and supports more than 28-42 inches LED panels, with a maximum resolution of up to 1920×1080. HK_T_RT2959P90 is a three-in-one (combo) board i.e. power card, backlight driver module, and TV Module are placed in a single PCB for this. HK-T-RT2959P90 has multiple input interface ports like USB, HDMI, AV, VGA port, and Scart. Its USB interface can be used for loading software as well as for playing multimedia files. HK-T.RT2959P90 supports analog TV signals, and digital TV (DVB-T/C MPEG4). HK-T.RT2959P90 firmware file is given below for the technician’s support.

General Specifications:

Model: HK-T.RT2959P90

Main Chipset: RTD295

Resolution Supported: 1920×1080

CPU:

OS: Non-Smart

Ram: NA

Rom: 25Q64 SPI Memory (8 MBit)

Audio Output Power: 2X8 W (8Ω)

Backlight: 43-52V

Backlight Power: 680mA

Service Code: Source 2580

Mirror Mode: No

Multi-Language: Yes

Firmware File: Install.img

Product User: DAEWOO, etc

Firmware Type: USB upgradeable Firmware

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

HK-T.RT2959P90 firmware for free download:

• HK.T.RT2959P90 1366x768_DAEWOO_Firmware

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV182H-J LED TV Board

CV182H-J is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features as per the latest requirements like multi HDMI inputs, USB interface, PC input, Component Input, TV, and Scart.

CV182H-J firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV182H-J

Main Chip: MST6E182VS-LF-Z1

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner: CTD-3SP512-37

Screen supported: 32 to 42 inches

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input 2580

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

CV182H-J firmware for free download:

• CV182H.J SUPRA-LC26 DUMP
• CV182H.J SUPRA-LC32 DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

CV182H-E LED TV Board

CV182H-E is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV182H-E firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV182H-E

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner: CTD-3SP512-37

Screen supported: 32 to 42 inches

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input 2580

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

CV182H-E firmware for free download:

• CV182H.E 1366x768_FUSION_DUMP
• CV182H.E 1366x768_SUPRA_DUMP
• CV182H.E 1920x1080_SUPRA_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.RT2025.1B Driver Board

T.RT2025.1B 11343 is a universal driver board support 15-32 inch LCD TV motherboard with multi-resolution screen panels. This is an analog TV control board, which is suitable for Asia-Pacific and Middle-East markets. It can best support less than 26-inch LCD panels which a resolution is up to 1440×900.

Basic Info:

Model No. T.RT2025.1B 11343

Main Chipset: RTD2025L+RTD2120L+TB1334

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner: AFT7/W001G

Sound: YD7496

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: S-Video, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.RT2025.1B Firmware files all resolutions for Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.SIS231.T701 LED TV Board

T.SIS231.T701 is an LCD/LED TV Board. It is suitable for the LVDS interface and supports more than 20-55 inches of LED panels, with a maximum resolution of up to 1920*1080. T_SIS231_T701 is a non-combo board i.e. power card and backlight driver module are required separately while the ATV board is built-in into it. T-SIS231-T701 has multiple input interface ports like USB, HDMI, AV, Headphones, and Scart ports for computer connectivity.

T SIS231 T701 for many brands of LED TVs like HAIER, etc. Its USB interface can be used for loading software as well as for playing multimedia files. T.SIS231.T701 support for analog TV signals. T.SIS231.T701 firmware files are given below for the technician’s support.

General Specifications:

Model: T.SIS231.T701

Main Chipset: SIS231

Resolution Supported: 1920×1080

Flash Memory: 25Q64

Television System: PAL (BG, DK), SECAM (BG, DK, LL)

Tuner:

Audio Output Power: 2X6 W (8Ω)

Backlight: NA

Backlight Power: W

Power Input: 12V

Power Consumption: 45W

Service Code: Menu 1147, Balance (value is “0”) +1969

Firmware Name: .bin

Firmware Type: Backup Dump

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB.

T.SIS231.T701 Firmware files for Free Download:

• T-SIS231-T701 HAIER LE39B700CF DUMP
• T-SIS231-T701 HAIER LE39M7000CF DUMP
• T-SIS231-T701 HAIER LE48M7000CF DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV182H-B LED TV Board

CV182H-B is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is builtin into this motherboard. This board has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart.CV182H-B firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: CV182H-B

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner: F03WT-3DDR-E

Screen supported: 18 to 42 inches

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Service Code:

Source/Input 2580

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

CV182H-B firmware for free download:

• CV182H_B 1366x768_FUSION_DUMP
• CV182H_B 1366x768_SUPRA_DUMP
• CV182H_B 1920x1080_SUPRA_DUMP

For video tutorials, visit “Kazmi Elecom” my youtube channel.