Tag Archives: kazmi electronics

Skr.819 Three-In-One TV Motherboard

SKR.819 is an analog LCD/LED TV ATV control card that is designed especially for Asian countries and the Middle East as well. SKR_819 is a combo, three-in-one card with Dual AV that is designed for the power supply unit and Inverter board with ATV Module three-in-one embedded board. This board supports 24 to 37-inch screens up to a resolution of 1920×1080.

General Specifications:

Brand/Mark: China Universal

Model: SKR.819

Main Chipset: RDA8501

Product: LED TV Driver Board

Resolution: Up to 1920×1080

Panel: 24″ to 37″

Panel voltage: 12V

Input Supply: 100 to 240V AC

Motherboard power: 48W

Backlight: 30-60V 25w

Backlight current : 350mA

Speaker Output: 2x5W(8ohm)

Service Code: Menu+1147

For updating software, you can use not only the USB interface but USB interface also the ability to play Movies/music/photos, Many formats are supported. You can also set boot images or logo.

How to Programm:

1. Copy the required program or software to the USB-Drive
2. Insert the USB flash drive into the USB port on the main board
3. Connect the keyboard and power on electricity, until you see the indicator on the keyboard after flashing in red and green, until the indicator flashing stop then turn off the power, then Pull out USB flash drive, and power on.

Note: Following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download firmware file:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

SKR.819 firmware free downloads:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

SKR.819

TP.RT2982.PB801 Smart LED TV Board

TP.RT2982.PB801 is an Analog and Digital network smart android board that is designed for 32-42 Inch LCD/LED TVs. It can support FHD resolution 1920×1080 screen panels.TP_RT2982_PB801 Smart Board has multiple ports of A/V, USB interface Ports, and many HDMI ports as well in addition to VGA and Headphone also. TP-RT2982-PB801 has a LAN/RJ45 Ethernet Connector interface port also for the wired/cable internet network.

TP RT2982 PB801 is a Combo high-speed Network Triple play motherboard that has the  ATV, Backlight Driver Board, and Power Supply Module built into it. The Video and Sound quality of TP.RT2982.PB801 android board are very good and the Response rate is very efficient. TP.RT2982.PB801 china smart network board has an android 4.4 version.

General Specifications:

Model: TP.RT2982.PB801

OSD Language: Chinese, English

CPU: 4-Core A7 1GHz

GPU:  2 x SGX544

DDR Size: 512MB

RAM Speed: DDR3 1600MHz

Android Version:  4.4

ROM: eMMC Flash 4G Byte

Interface: Dual/Single LVDS Interface

Resolution: 1920×1080 Maximum

Backlight Voltage:  45V-152V

Backlight Current: 400mA

Backlight Power: 45Watt Max.

Panel Power: 12V, 5V

RF Function: ATV & DTMB

Tuner: R840(IEC)

Video System: PAL/NTSC/SECAM

Audio Output Power: 2×8W(8Ω)

Power Input: 100-240V AC

Factory Setting: Menu+8893

Note: Following given firmware is USB upgradeable and eMMC backup files. Kazmi Elecom Team is not responsible for any type of damage/loss in result with loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the complete download process watch the video Click Here

How to Install Software:

• Copy the “allupgrade_2982_xx” file into USB Disk
• Insert the USB disk into the TV USB interface port
• Switch on the TV
• LED light starts flashing, wait 30 sec until the upgrade process is complete
• The TV will restart automatically. Not wait for boot. The first boot takes a long time after the upgrade

Here are below some TP.RT2982.PB801 firmware for free download:

allupgrade_2982_52.img
CP137305_ML_TP_RT2982_PB801_PAKISTAN_T390XVN01_0_REF52_AT_071f7bb8_20160226_Wisdom share

allupgrade_2982_33
CS139308_TP_RT2982_PB801_T390XVN01_IR_ML_EU_RH20_09HL05_EXX_CZ_SMART

allupgrade_2982_82
CS92482_RS_TP_RT2982_PB801_CMI_V390HJ1_P02_G51_PARMUSIC_AQY_REF82_AT

allupgrade_2982_86
CS97326_WB_RT2982_PB801_V420HJ2_P02_IR_WB_20DF_LOGO_HUALING
CS100383_WB_RT2982_PB801_LC390TU1A_IR_WB_20DF_LOGO_HALRIE_REF86_AT

allupgrade_2982_57
CS93268_TP_RT2982_PB801_ST315A04_IR_HX_AP_YS52JC_XL_001_REF57_AT_158ec177

allupgrade_2982_49
CS101997_HKC_32B7_LE32B3500W_TP_RT2982_PB801_A7_HK315LEDM_EH9YH_IR_HTR_A07_REF49

allupgrade_2982_43
le32d58s_7C01A_CP81798_XM_TP_RT2982_PB801_CHINA_LC320TU3A

allupgrade_2982_48
allupgrade_2982_sos

allupgrade_2982_45

le32d58s
LD32S86

CV59L Universal LCD/LED Board

CV59L is a universal LCD/led tv control board that is Applicable to 15-32 Inch LCD/LED TV panels. Three-In-One Motherboard CV-59L is suitable With Any Screen.CV_59L Board has different versions with the same chipset as v59. Some of the Board names are given below:

• CV.59L-A
• CV.59L-C
• CV.59L-D
• CV.59L-E
• CV.59L-F
• CV.59L-G
• CV.59L-J
• CV.59L-K
• CV.59L-L

Description:

CV59L firmware for free download:

DIRECT DOWNLOAD CV.59L-C

DIRECT DOWNLOAD CV.59L-L

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

T.V56.A8 HD LCD Universal Driver Board

T.V56.A8 HD LCD Universal Driver Board Dual Video Support USB Playback TV Board For V59.A81. it Supports multi-OSD languages. This universal LCD control board supports a lot of panels. Max supports Full HD LCD tv main board 1920X1080 resolution TFT-LCD  14″ to 32 ” screen. it can Dynamically adjust the picture’s color, contrast ratio, definition, and so on. it Automatically detects input video format. T.V56.A8 firmware files are given below for the technicians’ support.

Basic Info:

Model No. T.V56.A8

Main Chipset: TSUMV56RUU-Z1

Tuner: R842

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes

Mirror Option: Yes

Backlight Adjust: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

• Empty the USB disk or Format in FAT32
• Copy the required resolution file (*. Bin file) with the TXT file to the USB disk
• Connect the USB disk to the mainboard
• Connect the Keyboard and TV Mainboard
• Connect the power supply, and check the keyboard light. If there is a flashing light,
  that is in the written program, waiting for the light to turn to Green, work is done.

Note: If there is no flashing light, please cut off the power supply, then connect the USB disk once
again, then connect the power supply again, and if the power supply can’t be cut off *The same firmware can only be burned once a time

Factory Service Mode:

Menu+1147

Boot Logo Setting:

• Copy your logo into the USB disk
• Connect the USB disk to the mainboard
• Find your logo in Multi-media File
• Select your logo
• Press No.”6 ” on the remote control to change to fullscreen play, then press “ok” on
  the remote control, on the bottom of the option items, there is a ” catch”, choose it.

Note: Following firmware collection is a USB bootable and a backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download T.V56.A8 Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

T.V56.A8 Firmware All resolutions Free Download Here :

DIRECT DOWNLOAD

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.VST59S.21 Universal TV Control Board

T.VST59S.21 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels which resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. Its HDMI port support 1.4 and its HDCP support 1.1.

General Specifications:

Model: T.VST59S.21

Main Chipset: V59XUS

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plug in the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

T.VST59S.21 Firmware All resolutions Free Download Here :

TP.V56.PB801 Universal LCD/LED Board

General Specifications:

Brand/Mark: China Universal

Model: TP.V56.PB801

Chipset: TSUMV56RUU-Z1

Product: LED TV

Backlight Info: 45V-63V (520mA) 35Watt

66V-94V (600mA) 45Watt

Screen Supported: 32 to 46″

Supported Resolution: 1920×1080

Service Code: Menu + 1147

Note: 

All Backup or Dump files can be loaded by the programmer. Can not upgrade by USB interface. All files are tested by myself. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.V56.PB801 firmware for free download:

For video tutorials, visit my youtube channel.

Z.VST.3463.A1 Universal DVB-T2 TV Board

Z.VST.3463.A is a digital DVB-T2/DVB-T/DVB-C TV control board, which is suitable for the Europe market. Z.VST.3463.A1 is a digital DVB-T2/DVB-T/DVB-C TV driver board for the European market. Its USB slot can be used for updating software and playing multimedia, such as MP3 and JPEG. The solution’s USB interface is available for software upgrades and multimedia playback. HDMI1.3/1.4 compliant with ARC support, HDCP1.2 compliant. The HDMI-supported version of this solution is 1.3/1.4 compatible with ARC, and HDCP supports version 1.2.

General Specifications:

Model: Z.VST.3463.A1

Main Chipset: MSD3463GU-Z1

Video Input: ATV/DTV

• DVB‐T:COFDM QPSK, 16QAM, 64QAM
• DVB‐T2: COFDM QPSK, 16QAM ,64QAM ,256QAM
• DVB‐C:16QAM,32QAM,64QAM,128QAM,256QAM

Resolution Support: up to 1920×1080

Tuner chip: R840/R842

Panel Volt: 3.3v, 5v, 12v

Terminal Functions: USB ,HDMI , VGA ,AV,PCAUDIOIN, TV , EARPHONEOUT,AV OUT

Key Function: TV/AV,MENU,VOL+,VOL-, CH+,CH-,POWER

OSD Language: English, Spanish, French, etc.

Audio Output: 2×2W(4Ω)/2×8W

Flash Memory: 25Q64CSIG

Power Input: 12v DC

Standby Power Consumption: < 0.3W(Board Only)

Service Menu Code:

Input 2580

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

How to Load Software:

1. Put the firmware of “3463GU_A.bin” in the formatted USB flash disk,  then insert the USB disk into the board
2. After turning on the power, the light of the 7key button will be Red then flash red and blue.
after about 1 minute, the light stops flashing, which means the upgrade has finished.
(Note that write programs do not power outages, crashing won’t be able to use)

Z.VST.3463.A1 firmware of All Resolutions for free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.V56C.01 Universal Board

T.V56C.01 is a universal LCD/LED TV Controller board that is designed for Asian countries. T.V56C.01 supports a high screen resolution of FHD panels. It supports high-resolution 1920*1200 15-32 inch LVDS screens.

Basic Info:

Model No. T.V56C.01

Main Chipset: TSUMV56JUL-Z1

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

T.V56C.01 Firmware All resolutions Free Download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

LAD.MV59S LCD/LED Controller Board

LAD.MV59S is designed for an LCD/LED HD TV Board that supports the screen size of 32″ to 42″. This is three in one motherboard that has the main power module and an Inverter module in a single piece of a motherboard. It is best with its interfaces like Dual AV, Dual HDMI input, Dual USB interface, PC Input with audio, and Headphone jack. It has 30 pins LVDS Connector screen cable and has 4mb program storage memory.

This Board is also available in different versions like:

• LAD-MV59S-I
• LAD-MV59S-G
• LAD-MV59S-Q

General Specifications:

Brand/Mark: China Universal HD Three in One Board

Model: LAD.MV59S.G, LAD.MV59S.I, LAD.MV59S.Q

Product: LED TV

LED Backlight Current: 300mA*2

Flash IC: 4Mb

Screen supported: 32-42 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Menu+7710

How to Program:

1. Format the USB Disk with FAT32 System
2. Transfer the required resolution file into USB
3. Insert the USB into TV Motherboard USB interface
4. Connect the Keyboard&IR
5. Power on the Main Board and wait until LED light Start Flashing
6. Keep watching while the LED light stops flashing. It is Done

Note: Most files are read and saved with the programmer and will be load by a programmer.

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here are below some LAD.MV59S firmware for free download:

VS.TP53U71.2

VS.TP53U71.2 is a combo LCD/LED driver controller board suitable for 32-inch TVs. This new Board is best according to its features like backlight adjustment, Mirroring option, and Logo capture. VS-TP53U71.2 is best suitable for the Asia Pacific and the Middle East as well.

General Specifications:

Model Number: VS.TP53U71.2

Main Chip: TSUMV53RUU-Z1

Screen Supported: 32 inch

Resolution: 1920×1080

Backlight Current: 450mA (50W)

Mirror Option: Yes

Backlight Adjustment: Yes

Panel Voltage: 12V

Capture Logo: Yes

Service Menu:

Input + 208

Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

VS.TP53U71.2 firmware for all resolution free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.