Tag Archives: kazmi electronics

TP.V56C.PB818 LED TV Board

TP.V56C.PB818 is an analog LCD/LED TV ATV Controller Board that is designed especially for Asian countries and the Middle East as well. TP-V56C-PB818 is a combo, three in one universal Board that is designed for the power supply unit and Inverter board with ATV Module three-in-one embedded board and is also called a combo tv board. TP_V56C_PB818 supports 24 to 36-inch screens up to a resolution of 1920×1080. You can use the USB interface for updating software and can also the ability to play Movies/music/photos, Many formats are supported.

General Specifications:

Brand/Mark: Lehua China Universal

Model: TP.V56C.PB818

Main Chipset: TSUV56RJUL-Z1

Product: LED TV Driver Motherboard

Resolution: Up to 1920×1080

Panel Supported: 24″ to 36″

Panel voltage: 12V

Input Supply: 100 to 240V AC

Motherboard power: 48W

Backlight Parameters: 45-63V 27w

Backlight current: 480mA

Speaker Output: 2x5W(8ohm)

Service Code: Menu+1147

How to Load Software:

1. Copy the required program/bin file or software to the USB-Disk drive
2. Insert the USB disk drive into the USB interface port on the main board
3. Connect the keyboard and power on the switch, until you see the indicator on the keyboard flashing in red and green, until the indicator flashing stops then turn off the power, then Pull out the USB disk, and power it on.

Note: 

All Backup or Dump files can be loaded by the programmer. Can not upgrade by USB interface. All files are tested by myself. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.V56C.PB818 firmware USB updateable for free download:

For video tutorials, visit my youtube channel.

TP.V56C.PA673 LED TV Board

TP.V56C.PA673 is an analog tv board with the integration of a network driver board, power supply, and tv module. TP-V56C-PA673 with backlight power under 15W, the main promotion backlight voltage is between 18v-60V, and single backlight output. TP_V56C_PA673 is mostly used for 18.5″ to 24″ screens and can support resolutions up to 1920×1080.

General Specifications:

Brand Name: Junhengtai
Model Number:  TP.V56C.PA673
Backlight Type: LED
Wide Screen Support: Yes
Display Format: 720P (HD)

Screen Size: 18.5-24 inch
Support Resolution: 1920×1080
Main IC: TSUMV56RJUL-Z1

OSD Language: English

Factory Mode: Menu+1147

How to Update Software:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) with the TXT file to the
U disk based on your screen size

Step 3: Connect the U dish and TV Mainboard Via USB Interface

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light,
that is in the written program, waiting for the light to turn to Green, work is done.
If there is no flashing light, please cut off the power supply, then connect the USB once
again, then connect the power supply again,

(Note: During Step 5, the power supply can’t be cut off *The same firmware can only
be burned once time)

Boot Logo Setting:

Step 1: Put your logo into the U disk

Step 2: Connect your U disk with the mainboard

Step 3: Find your logo in Multi-media File

Step 4: Select your logo

Step 5: Press No.”6 ” on the remote control to change to fullscreen play, then press “ok” on
the remote control, on the bottom of the option items, there is a ” catch”, choose it. Done

Note: 

All Backup or Dump files can be loaded by the programmer. Can not upgrade by USB interface. All files are tested by myself. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.V56C.PA673 firmware USB updateable for free download:

For video tutorials, visit my youtube channel.

Ecostar CX-32U575 A+ LED TV

Ecostar CX-32U575 A+ is a 32 inches HD Ready LED TV with a resolution of 1366×768. CX-32U575 A+ is a non-smart tv. CX-32U575 A+ led TV has all the latest features and connectivity ports such as an HDMI port and USB port, and Dual Audio Video with a 60 Hz refresh rate. It has a powerful sound output system. Its aspect ratio is 16:09 and its dynamic ratio is 150000:1. Its view angle is horizontal: 170 degrees and vertical: 160 degrees.

CX-32U575 A+ has additional edge-led technology, smart power saving, digital noise reduction, intelligent picture technology, eye-safe t matrix, brightness is 250 cd/m2, and response time is 5 ms. Ecostar firmware file is given below for the technician’s support. For more Ecostar software collection visit here.

General Specifications & Features:

Make: Ecostar

Model: CX-32U575

Display Size: 32″

Storage Memory: 4 MB

HD Technology: HD Ready

Panel: HD

No of HDMI Ports: 2

No of USB Ports: 1

No of AV Ports: 1

Speaker Output RMS: 10W (5W*2)

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 55 W, 0.5 W (Standby)

Firmware Type: Backup Dump

Firmware Name: NA

Main Board: V53M5C2

Ecostar CX-32U575 Price:

This model is now discontinued. Maybe you can find it in old stock. The price of this LED TV is approximately USD 160 but keeping in mind the price should be varied according to the dollar rate in Pakistan. convert the dollar rate in rupees to get the approximate price in PKR.

Note: Following given firmware is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware.

Ecostar CX-32U575 software file free download:

For Video Tutorials Visit my youtube Channel

TP.VST59.P86 LED TV Board

TP.VST59.P86 is an analog TV control board, which is suitable for Asia-Pacific and middle-East markets. TP-VST59-P86 is an integration board of power supply, LED driver, and TV board that is also called a combo board. TP_VST59_P86’s power part is an energy-efficient ultrathin DC-line switching power supply unit, with max 75W/115VAC input, and 65 watts multi-output. It fits 26〞to 32〞LED backlight TFT panels. TP VST59 P86’s USB slot can be used for updating software and playing multimedia, such as MP3 and JPEG.

Note: With the Power of constant current part less than35W, TP.VST59.P86 up to support 6 channel output and current of each channel are up to 280mA. The Fuse inside the power supply shall open when the AC input current is over the rated current of the fuse. This Fuse protection will cause the switching power supply to fail.

General Specifications:

Brand/Mark: China Universal

Model: TP.VST59.P86

Main Chipset: TSUMV59XU-Z1

Product: LED TV

Backlight: 35W 280mA

Panel Voltage: 12v

Board Power Input: 220v AC

Resolution: Up to 1920×1080

Screen Supported: 26 to 32 inch

Service Code: Menu+1147 OR Menu+8893

Note: The following firmware is a USB boot and dumps backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

A list of Software included in the download file is given here:

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

Here are below some TP.VST59.P86  firmware free download:

TP.V56.PB726 Combo LED TV Board

TP.V56.PB7826 is an analog LCD/LED TV ATV control card that is designed especially for Asian countries and the Middle East as well. TP_V56_PB726 is a combo card that is designed for the power supply unit and Inverter board with ATV Module three in one embedded board. This board supports 32 to 50-inch screens up to a resolution of 1920×1080. Its USB interface can support software upgrades and multimedia playback as well.

General Specifications:

Brand/Mark: China Universal

Model: TP.V56.PB726

Main Chipset: TSUMV56

Product: LED TV Driver Board

Resolution: Up to 1920×1080

Panel: 32″ to 47″

Panel voltage: 12V

Input Supply: 220V AC

Backlight: 32-39 inches (45-65 v / 35 W) & 37-47 inches (65-94 w / 45 W)

Speaker Output: 2x8W

Service Mode:

Menu+1147

Note: 

All files Can be upgraded by USB interface and All Backup or Dump files can be loaded by the programmer. Can not upgrade by USB interface. All files are tested by myself. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.V56.PB726 firmware free download:

For video tutorials, visit my youtube channel.

T.R85.A81 Universal LED TV Board

Basic Info:

Model No. T.R85.A81

Main Chipset: RDA 8501

Trademark: CXEL

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

Board Size: 168.00 X 42.0 (mm)

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required resolution Firmware/software in FAT32 USB Disk
2. insert the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following given software/firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

T.R85.A81 Firmware All resolutions Free Download Here :

T.VST59S.81 LED TV Board

T.VST59S.81 is an analog TV control board, which is suitable for Asia-Pacific and middle-East markets. T_VST59S_81 is a single universal board without a power supply and LED driver only a TV board that is the external power supply. T-VST59S-81 supports 26〞to 60〞LED backlight TFT panel screens. Its USB 2.0 interface can be used for multimedia playback and for a software update as well The HDMI supports 1.4, and the HDCP support 1.1.

General Specifications:

Brand/Mark: China Universal

Model: T.VST59S.81

Main Chipset: TSUMV59XUS-Z1

OSD Language: Chinese, English

Product: LED TV

Backlight: No

Panel Voltage: 5v, 12v

Board Power Input: 12v/24v

Resolution: Up to 1920×1080

Interface: Dual/Single LVDS Interface

Screen Supported: 26 to 60 inch

Audio Power Output: for 12v (2x8w 8ohm), for 24v (2x9w 8ohm)

Service Code: Menu+1147

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

Here are below all T.VST59S.81 firmware free download:

TP.V56.PB826 Combo LED TV Board

TP.V56.PB826 is an analog LCD/LED TV ATV control card that is designed especially for Asian countries and the Middle East as well. TP_V56_PB826 is a combo card that is designed for the power supply unit and Inverter board with ATV Module three in one embedded board. This board supports 28 to 32-inch screens up to a resolution of 1920×1080. Its USB interface can support software upgrades and multimedia playback as well.

General Specifications:

Brand/Mark: China Universal

Model: TP.V56.PB826

Main Chipset: TSUMV56RUU-Z1

Tuner Chip: R842

Product: LED TV Driver Board

Resolution: Up to 1920×1080

Panel: 28″ to 32″

Panel voltage: 12V

Backlight Adjust: Yes

Mirror Mode: Yes

Input Supply: 220V AC

Backlight: 45-65V 35w

Speaker Output: 2x5W

Service Mode:

Source/Input 2580

Note: 

All Backup or Dump files can be loaded by the programmer. Can not upgrade by USB interface. All files are tested by myself. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.V56.PB826 firmware free download:

For video tutorials, visit my youtube channel.

TP.VST59.P75 LED TV Board

TP.VST59.P75 is an analog TV control board, which is suitable for Asia-Pacific and middle-East markets. TP_VST59_P75 is an integration board of power supply, LED driver, and TV board that is also called a combo board. TP-VST59-P75’s power port is an energy-efficient ultrathin DC-line switching power supply unit, with max 85W/115VAC input, and 100 watts multi-output. It fits 40〞to 50〞LED backlight TFT panel screens. Its USB interface can be used for multimedia playback and for software updates as well. TP.VST59.P75 ’s USB slot can be used for updating software and playing multimedia, such as MP3 and JPEG.

General Specifications:

Brand/Mark: China Universal

Model: TP.VST59.P75

Main Chipset: TSUMV59XU/TSUMV59XE

Product: LED TV

OSD Language: Chinese, English

Backlight: 60-85v, 60w 800mA

Panel Voltage: 12v

Board Power Input: 100 to 240v AC

Resolution: Up to 1920×1080

Screen Supported: 40 to 50 inch

Service Code: Menu+1147

Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

Here are below some TP.VST59.P75 firmware free download:

TP.VST59S.PB716 LED TV Board

TP.VST59S.PB716 is an analog TV control board, which is suitable for Asia-Pacific and middle-East markets. TP_VST59S_PB716 is an integration board of power supply, LED driver, and TV board that is also called a combo board. TP-VST59S-PB716’s power part is an energy-efficient ultrathin DC-line switching power supply unit, with max 85W/115VAC input, and 65 watts multi-output. It fits 26〞to 42〞LED backlight TFT panel screens. Its USB interface can be used for multimedia playback and for software updates as well.

General Specifications:

Brand/Mark: China Universal

Model: TP.VST59S.PB716

Main Chipset: TSUMV59XUS-Z1

Product: LED TV

Backlight: 45 to 65v,  35w

Panel Voltage: 5v, 12v

Board Power Input: 220v AC

Resolution: Up to 1920×1080

Screen Supported: 26 to 42 inch

Service Code: Menu+1147

Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

Here are below some TP.VST59S.PB716 firmware free download: