Tag Archives: kazmi elecom

CV56XH-LED TV Main Board

CV56XH is a simple ATV Drive Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This is Combo Board has the integration of the main power module, LED Backlight Inverter Circuit, and ATV Card Also in a single piece of a motherboard. This has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV and Headphone jack.

CV56X H is available in the market with different model names. Some of them are given here below:

• CV56X H-U32
• CV56X H-U42
• CV56X H-U50

General Specifications:

Brand/Mark: Universal HD Three in One Board

Model: CV56X H-U32, CV56X H-U42, CV56X H-U50

Main Chip: TSUMV53RUUL-Z1

Product: LED TV

LED Backlight: 35w to 75w

Flash IC: 4Mb

Screen supported: 26-75 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Input 208

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here are below some CV56XH firmware for free download:

LA.MV9.P V29/v59 Universal Board

LA.MV9.P is a flat panel TV control board designed for Asia-Pacific Market, the board is excellent performance and maturity. LA.MV9.P can support LCD and LED panels, maximum resolution supported is1920x 1080. It’s apt to drive an LCD or LED panel smaller than 26’ to get a cost-effective and high-performance and popular flat-panel analog TV set. LA MV9 P supports normal input types, such as HDMI, USB, AV, VGA, ATV, etc.

LA.MV9.P can support three main chips: TSUMV29， TSUMV39, and TSUMV59. When TSUMV29 IC is adopted, LA-MV9-P has no multimedia function. When TSUMV39 IC is Adopted, it can play MP3 and image files through its USB slot. When TSUMV59 IC is adopted, LA_MV9_P has powerful multimedia playback capability and can play most multimedia files through its USB Slot， including 1080P video files. It’s very easy to upgrade firmware by a USB disk for LA.MV9.P

Basic Info:

Model No. LA.MV9.P

Main Chipset: TSUMV29,  TSUMV39, TSUMV59

Screen Supported: 10-32″

Display Format: 1080P

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes (English/French/Spanish/Portuguese/Chinese)

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2.5 Watt (8 ohm)

Panel Voltage: 3.3V/5V/12V (jumper cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.6W (for the mainboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Connect the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the TV, it will start flashing, Wait for indicator led stops flashing
4. Done. Unplug the Udisk
5. Note that It will take max one minute to upgrade the firmware

Factory Service Mode:

Menu+1147

Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

LA.MV9.P Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

LDD.H510 Smart Board

LDD.H510 Boards are bifurcated into three types boards. LDD-H510-A is designed for Full HD and UHD resolution supported while LDD-H510-B138 is also designed for UHD screens and LDD-H510-B is designed for Full HD panel screens. These all are combo boards with a minimum of 512 MB of ram and 4 GB of ROM in the shape of emmc chip and a maximum 1Gb Ram and 8Gb Rom Memory inbuild into this board. These boards are smart WIFI network supported board supports up to 4k UHD resolution.LDD-H510 boards are suitable for 40-65 inch screens.

General Specifications:

Model Number: LDD.H510.A, LDD.H510.B, LDD.H510.B138

Ram: 512/1Gb

Rom: 4Gb/8Gb eMMC

Resolution Supported: 1920×1080, 3840×2160

How to Upgrade:

1. Copy the required firmware file into the USB
2. Plug the USB into Main Board
3. Press the standby button on Keypad and Power on the Switch
4. Release the button when the upgrade progress bar started on LED Screen
5. Do Not Power off during Upgrade Process.

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

LDD.H510 firmware for free download:

LDD-H510.A_firmware

LDD-H510.B_firmware

LDD-H510.B138_firmware

HK.T.RDA8501CP531 LED TV Control Card

HK.T.RDA8501CP531 is a multi-purpose and energy-efficient LCD/LED TV universal combo control board with a single/dual 8-bit LVDS interface. HK_T_RDA8501CP531 supports resolution panel up to 1920×1080.HK-T-RDA8501CP531 multimedia playback function and software upgrade are applicable by the USB port.

Basic Info:

Model No. HK.T.RDA8501CP531

Main Chipset: RDA8501C

Display Format: 1080p

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes (English/French/Spanish/Portuguese/Chinese)

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2.5 Watt (8 ohm)

Panel Voltage: 3.3V/5V/12V (jumper cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

Electrical Parameters:

Working Input Voltage: DC +12 Volt or AC220v

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.6W (for the mainboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plug in the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the Udisk
5. Note that It will take maximum one minute to upgrade the firmware

Factory Service Mode:

Menu+1147

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

HK.T.RDA8501CP531 Firmware All resolutions Free Download Here :

TP.MS338.PB818 Universal Smart Board

TP.MS338.PB818 is a universal smart integrated board with an Android wifi network function. TP MS338 PB818 is Three in One Network Driver Wi-Fi board that can support up to 26 to 46-inch screens. TP_MS338_PB818 can be equipped with various screens. TP.MS338.PB818 Smart Board has multiple ports A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Scart, and Earphones. TP.MS338E-PA671 has a LAN/RJ45 Connector interface port also for the wired internet network.

TP.MS338.PB818 is a Combo Network Triple play board that has a Digital TV tuner built-in in it. The Graphics and Sound quality of the Android board are very good and the Response rate is very efficient. TP-MS338-PB818 China smart network board can support up to 32″ screen panels. TP.MS338.PB818 firmware is available for technician support.

General Specifications:

Brand/Mark: FHD Smart LED TV Main Board

Main Borad Model: TP.MS338.PB818

Main Chipset: DTMB: MSD6A338ST-WL OR MSD6A338ST-003J

OS: Android 4.4

CPU: A7*2

CPU Frequency: 1GHz

GPU: Mali400*2

GPU Frequency: 550MHz

Ram: 512Mb/1 Gb

Rom: 4Gb/8Gb eMMC

Backlight: 30v to 160v 45w

Audio Output: 2x8w

Resolution: upto 1920×1080 (26” to 46″)

Service Code: Menu+1147

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. For more Details about the download process watch the video Click Here

How to Install:

• Copy the .bin file into the USB disk
• Connect the U-Disk to TV
• Switch on the TV
• Standby lights start flashing. when the light flashing speed increases it means it is complete.
• Switch OFF, Remove the Disk, and Switch ON again. Done

TP.MS338.PB818 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

V.TV9G02 Universal LED TV Board

V.TV9G02 is a universal TV control board designed for Asia‐Pacific and Middle-East markets. V_TV9G_02 board has excellent and mature performance. V-TV9G-02 can support LCD and LED panels, and the maximum resolution supported is 1920×1080 Full HD. LA MV56U A can drive an LCD or LED panel smaller than 26 inches to get a cost‐effective and high-performance and popular flat-panel analog TV set.

Basic Info:

Model No. V.TV9G02

Main Chipset: TSUMV59XC

Display Format: 1080P

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes (English/French/Spanish/Portuguese/Chinese)

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2.5 Watt (8 ohm)

Panel Voltage: 3.3V/5V/12V (jumper cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.6W (for the mainboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required bin file in the FAT32 USB Disk
2. Connect the U disk to the Mainboard
3. Switch ON the TV, it will start flashing, Wait for the indicator led stops flashing
4. Done. Unplug the U-disk
5. Note that It will take max one minute to upgrade the firmware

Factory Service Mode:

Menu+1147

Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

V.TV9G02 Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

VS.SP33811.2 Android Bluetooth Smart LED TV Board

VS.SP33811.2 is a Smart Wireless Network TV Driver Board specially designed as Universal LCD LED Controller Board For Android WI-FI ATV functions with Bluetooth feature. This is suitable for all HD LCD/LED panels. This Intelligent Network TV board have a special feature of Android and Rom storage capacity. VS-SP33811-2 Supports RJ45 network signal, USB 2.0, HDMI 1.4 and TV.VGA, AV input and earphone output. VS_SP33811_2 Built full-featured browser and support for HTML5 web page format, providing the fun of browsing the web and watching a video at random. It also supports surfing the internet with a wireless mouse and keyboard.

General Specifications:

Brand/Mark: LED TV Main Board (Bluetooth Android WIFI Network Drive Board)

Main Board Model: VS.SP33811.2

OSD Language: Chinese, English, Espoal, French, Vietnamese

TV Signal: ATV

Input Interface: PC / VGA / HDMI / TV / Network / USB / TF / Dual AV

Panel Voltage: 5V/12V

Screen Supported: 17-65 inch

Resolution Supported: 1920×1080

OS: Android 4.4

CPU: 1.5GHz (ARM Cortex A7 double Core CPU)

GPU: Multi-core Mali -400MP2

Ram: 512Mb/1Gb

Rom: 4 Gb eMMC

Flip/Mirror Mode: Yes

Bluetooth: Yes

Display/Boot Logo: Yes

Power Input: 220v AC

Power Rating: 12V/4Amp DC

Service Code:

Input/Source 208

How to Load Software:

1. Transfer the required resolution file into USB Disk
2. Plugin the USB Disk into Main Board
3. Power on the board
4. Wait until the red light starts flashing
5. Note: Do Not Cut the power during Flash burning process

Here are below VS.SP33811.2 firmware for free download:

TP.VST59.P83 LED TV Board

TP.VST59.P83 is a universal led tv combo controller board that is suitable for 32-inch panels and others. TP_VST59_P83 is three in one board that is backlight inverter, main power supply, and logic board are builtin into a single PCB which is why it is called a combo board. TP-VST59-P83 support 1920×1080 resolution. Its USB interface can be used for multimedia playback and for software updates as well.

General Specifications:

Brand/Mark: China Universal

Model: TP.VST59.P83

Main Chipset: TSUMV59XUS-Z1

Product: LED TV

Backlight: 45 to 65v 4400mA 75w

Panel Voltage: 12v

Board Power Input: 220v AC

Resolution: Up to 1920×1080

Screen Supported: 26 to 46 inch

Service Code: Menu+1147 OR Menu+8893

Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here

Here are below some TP.VST59.P83  firmware free download:

LA.MV56U.A & LA.MV56U.B

LA.MV56U.A is a flat panel TV control board designed for Asia‐Pacific and Middle-East markets. LA_MV56U_A board has excellent and mature performance. LA-MV56U-A can support LCD and LED panels, the maximum resolution supported is 1920×1080 Full HD. LA MV56U A can drive an LCD or LED panel smaller than 26 inches to get a cost‐effective and high-performance and popular flat-panel analog TV set.

LA.MV56U.B is also an LCD TV Controller Board with VGA HDMI USB Inputs, Supports Max resolution 1920×1200 and 1920×1080, LVDS panel signal output. It’s very easy to upgrade software by a USB disk for LA.MV56U.A and LA.MV56U.B.

Basic Info:

Model No. LA.MV56U.A and LA.MV56U.B

Main Chipset: TSUMV56RUU‐Z1

Display Format: 1080P

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes (English/French/Spanish/Portuguese/Chinese)

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2.5 Watt (8 ohm)

Panel Voltage: 3.3V/5V/12V (jumper cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.6W (for the mainboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in the FAT32 USB Disk
2. Connect the U disk to the Mainboard USB port of the LCD/LED TV
3. Switch ON the TV, it will start flashing, Wait for the indicator led stops flashing
4. Done. Unplug the U-disk
5. Note that It will take max one minute to upgrade the firmware

Factory Service Mode:

Menu+1147

Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

LA.MV56U Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

LAD.MV56U LED TV Controller Board

LAD.MV56U.A48 is an analog LCD/LED TV Combo Control Board with Power Supply and LED Driver with ATV Module. LAD_MV56U_A48 is designed for Asia-Pacific and the Middle-East market. Its USB slot can be used for updating software and playing multimedia files such as MP3, MP4, and JPEG. The Power Supply part is Energy-Efficient. Ultra-thin DC line switching power supply unit is with 48 watts Multi-Output which can support led backlight TFT Panels from 28″ to 32″.LAD-MV56U-A48 supports maximum resolution up to 1920×1080.

LAD.MV56U.B48 is also an analog TV Control Board with an integrated power supply, constant current backlight driver board, and ATV Module.LAD_MV56U_B48 is also suitable for 28 to 32″ screen panels with a maximum resolution supported is 1920×1080. LAD-MV56U-B48 is a powerful function of multimedia playback. It can play Most Multimedia files through the USB interface and supports Full HD 1080p Video.

This Board is also available in different versions like:

LAD-MV56U-A36

LAD-MV56U-A48

LAD-MV56U-A75

LAD-MV56U-B48

LAD-MV56U-C36

General Specifications:

Brand/Mark: China Universal HD Three in One Board

Model: LAD-MV56U-A36, LAD-MV56U-A48, LAD-MV56U-A75, LAD-MV56U-B48, LAD-MV56U-C36

Main Chipset: TSUMV56RUU and TSUMV56RUE, TSUMV56RUU-Z1

Product: LED TV

LED Backlight Current: 300mA*2

Flash IC: 4Mb

Screen supported: 32-42 inch

Resolution: Up to 1920×1080

Power Supply: 100V~240V AC

Panel Power: 12V

Standby Power Consumption: <0.5W

Frequency Range: 47Hz To 63 Hz

Service Code:

Menu+1147

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here are below some LAD.MV56U firmware for free download: