CV59L is a universal LCD/led tv control board that is Applicable to 15-32 Inch LCD/LED TV panels. Three-In-One Motherboard CV-59L is suitable With Any Screen.CV_59L Board has different versions with the same chipset as v59. Some of the Board names are given below:
Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
T.V56.A8 HD LCD Universal Driver Board Dual Video Support USB Playback TV Board For V59.A81. it Supports multi-OSD languages. This universal LCD control board supports a lot of panels. Max supports Full HD LCD tv main board 1920X1080 resolution TFT-LCD 14″ to 32 ” screen. it can Dynamically adjust the picture’s color, contrast ratio, definition, and so on. it Automatically detects input video format. T.V56.A8 firmware files are given below for the technicians’ support.
Basic Info:
Model No. T.V56.A8
Main Chipset: TSUMV56RUU-Z1
Tuner: R842
Display Format: up to 1920×1080
Aspect Ratio: 4:3, 16:9 & 16:10
General Specifications:
TV System: PAL/NTSC
Panel Interface: Single channel or Dual channel LVDS
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
Empty the USB disk or Format in FAT32
Copy the required resolution file (*. Bin file) with the TXT file to the USB disk
Connect the USB disk to the mainboard
Connect the Keyboard and TV Mainboard
Connect the power supply, and check the keyboard light. If there is a flashing light,
that is in the written program, waiting for the light to turn to Green, work is done.
Note: If there is no flashing light, please cut off the power supply, then connect the USB disk once
again, then connect the power supply again, and if the power supply can’t be cut off *The same firmware can only be burned once a time
Factory Service Mode:
Menu+1147
Boot Logo Setting:
Copy your logo into the USB disk
Connect the USB disk to the mainboard
Find your logo in Multi-media File
Select your logo
Press No.”6 ” on the remote control to change to fullscreen play, then press “ok” on
the remote control, on the bottom of the option items, there is a ” catch”, choose it.
Note: Following firmware collection is a USB bootable and a backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download T.V56.A8 Firmware File:
Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here
T.V56.A8 Firmware All resolutions Free Download Here :
T.VST59S.21 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels which resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. Its HDMI port support 1.4 and its HDCP support 1.1.
General Specifications:
Model: T.VST59S.21
Main Chipset: V59XUS
TV System: PAL/SECAM/NTSC
Panel Interface: Single channel or Dual channel LVDS
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
Copy the Required Firmware/software in FAT32 USB Disk
Plug in the U disk into the Mainboard USB port of LCD/LED TV
Switch ON the power and Wait even IR indicator led stops flashing
Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)
Factory Service Mode:
Menu+1147
Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Firmware File:
Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here
T.VST59S.21 Firmware All resolutions Free Download Here :
All Backup or Dump files can be loaded by the programmer. Can not upgrade by USB interface. All files are tested by myself. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download all parts of the following given firmware/software and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
Z.VST.3463.A is a digital DVB-T2/DVB-T/DVB-C TV control board, which is suitable for the Europe market. Z.VST.3463.A1 is a digital DVB-T2/DVB-T/DVB-C TV driver board for the European market. Its USB slot can be used for updating software and playing multimedia, such as MP3 and JPEG. The solution’s USB interface is available for software upgrades and multimedia playback. HDMI1.3/1.4 compliant with ARC support, HDCP1.2 compliant. The HDMI-supported version of this solution is 1.3/1.4 compatible with ARC, and HDCP supports version 1.2.
General Specifications:
Model: Z.VST.3463.A1
Main Chipset: MSD3463GU-Z1
Video Input: ATV/DTV
DVB‐T:COFDM QPSK, 16QAM, 64QAM
DVB‐T2: COFDM QPSK, 16QAM ,64QAM ,256QAM
DVB‐C:16QAM,32QAM,64QAM,128QAM,256QAM
Resolution Support: up to 1920×1080
Tuner chip: R840/R842
Panel Volt: 3.3v, 5v, 12v
Terminal Functions: USB ,HDMI , VGA ,AV,PCAUDIOIN, TV , EARPHONEOUT,AV OUT
Key Function: TV/AV,MENU,VOL+,VOL-, CH+,CH-,POWER
OSD Language: English, Spanish, French, etc.
Audio Output: 2×2W(4Ω)/2×8W
Flash Memory: 25Q64CSIG
Power Input: 12v DC
Standby Power Consumption: < 0.3W(Board Only)
Service Menu Code:
Input 2580
Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.
How to Download Firmware Files:
Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here
How to Load Software:
1. Put the firmware of “3463GU_A.bin” in the formatted USB flash disk, then insert the USB disk into the board
2. After turning on the power, the light of the 7key button will be Red then flash red and blue.
after about 1 minute, the light stops flashing, which means the upgrade has finished.
(Note that write programs do not power outages, crashing won’t be able to use)
Z.VST.3463.A1 firmware of All Resolutions for free Download:
T.V56C.01 is a universal LCD/LED TV Controller board that is designed for Asian countries. T.V56C.01 supports a high screen resolution of FHD panels. It supports high-resolution 1920*1200 15-32 inch LVDS screens.
Basic Info:
Model No. T.V56C.01
Main Chipset: TSUMV56JUL-Z1
Display Format: up to 1920×1200
Aspect Ratio: 4:3, 16:9 & 16:10
General Specifications:
TV System: PAL/SECAM/NTSC
Panel Interface: Single channel or Dual channel LVDS
Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out
Audio O/P Power: 2 x 3 Watt (8 ohm)
Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)
USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)
USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)
IR Control: Yes (Controllable by Remote Control)
Electrical Parameters:
Working Input Voltage: DC +12 Volt
Maximum Current: 2000mA (Without Panel)
Standby Power: <0.2W (for the motherboard only)
Maximum Current for USB: 500mA
How to Upgrade Firmware:
Copy the Required Firmware/software into the FAT32 USB Disk
Plug the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator led stops flashing
Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)
Factory Service Mode:
Menu+1147
Note: The following firmware is a dump backup. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download the following firmware and then extract you will get the folder. Now load the file by a programmer. For More Detail about the download, process watch the video Click Here
LAD.MV59S is designed for an LCD/LED HD TV Board that supports the screen size of 32″ to 42″. This is three in one motherboard that has the main power module and an Inverter module in a single piece of a motherboard. It is best with its interfaces like Dual AV, Dual HDMI input, Dual USB interface, PC Input with audio, and Headphone jack. It has 30 pins LVDS Connector screen cable and has 4mb program storage memory.
This Board is also available in different versions like:
Power on the Main Board and wait until LED light Start Flashing
Keep watching while the LED light stops flashing. It is Done
Note: Most files are read and saved with the programmer and will be load by a programmer.
Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download:
Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here
Here are below some LAD.MV59S firmware for free download:
VS.TP53U71.2 is a combo LCD/LED driver controller board suitable for 32-inch TVs. This new Board is best according to its features like backlight adjustment, Mirroring option, and Logo capture. VS-TP53U71.2 is best suitable for the Asia Pacific and the Middle East as well.
General Specifications:
Model Number: VS.TP53U71.2
Main Chip: TSUMV53RUU-Z1
Screen Supported: 32 inch
Resolution: 1920×1080
Backlight Current: 450mA (50W)
Mirror Option: Yes
Backlight Adjustment: Yes
Panel Voltage: 12V
Capture Logo: Yes
Service Menu:
Input + 208
Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Firmware File:
Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here
VS.TP53U71.2 firmware for all resolution free download:
VS.TP53U61.2 is a combo LCD/LED driver controller board suitable for 32 to 55-inch TVs. This new Board is best according to its features like backlight adjustment, Mirroring option, and Logo capture. VS-TP53U61.2 is best suitable for the Asia Pacific and the Middle East as well.
General Specifications:
Model Number: VS.TP53U61.2
Main Chip: TSUMV53RUU-Z1
Screen Supported: 32 to 55 inch
Resolution: 1920×1080
Backlight Voltage: 65 to 100V
Backlight Current: 300 to 900mA (45 to 75W)
Mirror Option: Yes
Backlight Adjustment: Yes
Panel Voltage: 12V
Capture Logo: Yes
Service Menu:
Input + 208
Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Firmware File:
Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here
VS.TP53U61.2 firmware for all resolution free download:
VS.TP56L62.2 is a combo LCD/LED driver controller board suitable for 32 to 55-inch TVs. This new Board is best according to its features like backlight adjustment, Mirroring option, and Logo capture. VS-TP56L62.2 is best suitable for the Asia Pacific and the Middle East as well.
General Specifications:
Model Number: VS.TP56L62.2
Main Chip: TSUMV56RUUL-Z1
Screen Supported: 32 to 55 inch
Resolution: 1920×1080
Backlight: 520mA (75W)
Mirror Option: Yes
Backlight Adjustment: Yes
Panel Voltage: 12V
Capture Logo: Yes
Service Menu:
Menu + 1147
Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.
How to Download Firmware File:
Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here
VS.TP56L62.2 firmware for all resolution free download:
