Tag Archives: kazmi elecom

LA.MV59.P16 Universal Board

LA.MV59.P16 is an analog TV control board designed for Asia-Pacific Market, the board is excellent performance and maturity. LA_MV59_P16 can support LCD and LED panels, the maximum resolution supported is 1920x 1080. It’s apt to drive an LCD or LED panel smaller than 26’ to get a cost-effective and high-performance and popular flat-panel analog TV set. LAMV59 supports normal input types, such as HDMI, USB, AV, VGA, ATV, etc.

Basic Info:

Model No. LA.MV59.P16

Main Chipset: TSUMV59

Screen Supported: 10-32″

Display Format: 1080P

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes (English/French/Spanish/Portuguese/Chinese)

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2.5 Watt (8 ohm)

Panel Voltage: 3.3V/5V/12V (jumper cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.6W (for the mainboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Connect the U disk to the Mainboard USB port of the LCD/LED TV
3. Switch ON the TV, it will start flashing, Wait for the indicator led stops flashing
4. Done. Unplug the U-disk
5. Note that It will take max one minute to upgrade the firmware

Factory Service Mode:

Menu+1147

Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

LA.MV59.P16 Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

T.VST59.A8 & A81 Universal LED TV Card

T.VST59.A8 & A81 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels which resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. Its HDMI port support 1.4 and its HDCP support 1.1. T-VST59-A8 is compatible with 10-32 inch screens. T_VST59_A81 is widescreen supported and also has the multi-language option. T.VST59.A8 and T.VST59.A81 have the special feature of Dual AV.

General Specifications:

Model: T-VST59-A8 & T.VST59.A81

Main Chipset: TSUMV59XU

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plug in the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

T.VST59.A8 & A81 Firmware All resolutions Free Download Here :

T.VST59.A8 Direct Download

T.VST59.A81 Direct Download

ONIDA LEO32HAIN Smart LED TV

ONIDA LEO32HAIN has the P75-628VX V6.0 board installed in it which is an all-in-one driver board for smart network TVs for the Asian and South American markets. It integrates power, backlight drive, network, and TV to support a full HD LCD screen.P75_628VX_V6.0 Android TV Motherboard Compatible With Domestic And Foreign Standard 4 Core CPU. The built-in app store can download massive TV apps with third-party licenses. As a multi-in-one driver board, P75-628VX V6.0-B can be used in intelligent network TV and applies to Asian&South American markets. It combines the power supply, the backlight driver, the Internet, and television as a whole. It is suitable for 32″ to 65″ LED-backlit LCD screens.

This Board is used in Onida LEO32HAIN 32-inch LED HD-Ready TV and features a 32 Inch, LED, HD-Ready, 1366×768 display for your viewing pleasure. The Aspect Ratio of this screen is 16: 9 to meet the latest standards and consumes 75 W as power (when running). Other features of this TV include Display Mirroring, Double USB Sharing, Hotel Mode, MHL, Screen Casting, SmartView, and WiFi Direct. Also, the total speaker output of this TV is 16 W.

General Specifications:

Brand/Make: ONIDA

LED Model: LEO32HAIN, LEO32HIN

Board: P75-628VX V6.0

Android Version: 4.4

CPU: ARM Cortex A7 Quad-Core CPU 1GHz

GPU: Multi-core Mali -450MP2

RAM: 512Mb

Rom: 4Gb

Power Input: 115v-240 v

Power Consumption: 75w

Support RJ45 network signal, USB3.0 & 2.0, HDMI 1.4, analog TV, DVB-T/T2,
DTMB, ISDB-T. It also supports WIFI access and headphone output.

Firmware: MstarUpgrade.bin

Firmware Type: USB Updateable Firmware

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

Onida LEO32HAIN firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

Universal Smart Android Board Installation Guide With Original 40 Inches SONY LED TV

Philips 43PUT7791 4K ULTRA HD Smart TV

Philips 43PUT7791 Ultra HD TV has 4 times the resolution of a conventional Full HD TV. With over 8 million pixels and our unique Pixel Plus Ultra HD engine, you’ll experience improved images, sharpness, increased depth perception, superior contrast, smooth natural motion, and flawless details. Its IPS displays use advanced technology which gives you extra-wide viewing angles of 178/178 degrees, making it possible to view the display from almost any angle.

The USB connector allows access to jpeg photos, mp3 music, and video files through USB drives. Plug the USB into the slot at the side of the TV and access multimedia content using the easy on-screen content browser. Now view your videos, photos, and music effortlessly on your TV. Philips 43PUT7791 firmware files are shared for the technician’s support.

Technical Specifications:

Brand/Make: Philips

Model: 43PUT7791

Diagonal screen size (inch): 43 inch
Panel resolution: 3840×2160

On-Screen Display languages: English
Screen Format Adjustments: 16:9

Sound Output power (RMS): 20W
Sound System: Stereo
Sound Enhancement
Auto Volume Leveller

Number of HDMI connections: 3
Number of USB connections: 3
Number of AV connections: 2
AV output
Ext 3.5 mm jack x1
Other connections: Component Video (YPbPr) input
PC-In VGA: Yes
Antenna IEC75: Yes
S/PDIF out (coaxial): Yes
PC Audio in: Yes
Ethernet (RJ 45) 1x: Yes
LAN wireless: IEEE 802.11 b/g/n

Power consumption: 98 W
Power supply: 100-240VAC, 50/60Hz
Standby power consumption: Less than 1 watt

Note: The following given Software is a backup Dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download firmware files:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

Philips 43PUT7791 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV56XH-LED TV Main Board

CV56XH is a simple ATV Drive Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This is Combo Board has the integration of the main power module, LED Backlight Inverter Circuit, and ATV Card Also in a single piece of a motherboard. This has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV and Headphone jack.

CV56X H is available in the market with different model names. Some of them are given here below:

• CV56X H-U32
• CV56X H-U42
• CV56X H-U50

General Specifications:

Brand/Mark: Universal HD Three in One Board

Model: CV56X H-U32, CV56X H-U42, CV56X H-U50

Main Chip: TSUMV53RUUL-Z1

Product: LED TV

LED Backlight: 35w to 75w

Flash IC: 4Mb

Screen supported: 26-75 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Input 208

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here are below some CV56XH firmware for free download:

LA.MV9.P V29/v59 Universal Board

LA.MV9.P is a flat panel TV control board designed for Asia-Pacific Market, the board is excellent performance and maturity. LA.MV9.P can support LCD and LED panels, maximum resolution supported is1920x 1080. It’s apt to drive an LCD or LED panel smaller than 26’ to get a cost-effective and high-performance and popular flat-panel analog TV set. LA MV9 P supports normal input types, such as HDMI, USB, AV, VGA, ATV, etc.

LA.MV9.P can support three main chips: TSUMV29， TSUMV39, and TSUMV59. When TSUMV29 IC is adopted, LA-MV9-P has no multimedia function. When TSUMV39 IC is Adopted, it can play MP3 and image files through its USB slot. When TSUMV59 IC is adopted, LA_MV9_P has powerful multimedia playback capability and can play most multimedia files through its USB Slot， including 1080P video files. It’s very easy to upgrade firmware by a USB disk for LA.MV9.P

Basic Info:

Model No. LA.MV9.P

Main Chipset: TSUMV29,  TSUMV39, TSUMV59

Screen Supported: 10-32″

Display Format: 1080P

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes (English/French/Spanish/Portuguese/Chinese)

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2.5 Watt (8 ohm)

Panel Voltage: 3.3V/5V/12V (jumper cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.6W (for the mainboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Connect the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the TV, it will start flashing, Wait for indicator led stops flashing
4. Done. Unplug the Udisk
5. Note that It will take max one minute to upgrade the firmware

Factory Service Mode:

Menu+1147

Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

LA.MV9.P Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

LDD.H510 Smart Board

LDD.H510 Boards are bifurcated into three types boards. LDD-H510-A is designed for Full HD and UHD resolution supported while LDD-H510-B138 is also designed for UHD screens and LDD-H510-B is designed for Full HD panel screens. These all are combo boards with a minimum of 512 MB of ram and 4 GB of ROM in the shape of emmc chip and a maximum 1Gb Ram and 8Gb Rom Memory inbuild into this board. These boards are smart WIFI network supported board supports up to 4k UHD resolution.LDD-H510 boards are suitable for 40-65 inch screens.

General Specifications:

Model Number: LDD.H510.A, LDD.H510.B, LDD.H510.B138

Ram: 512/1Gb

Rom: 4Gb/8Gb eMMC

Resolution Supported: 1920×1080, 3840×2160

How to Upgrade:

1. Copy the required firmware file into the USB
2. Plug the USB into Main Board
3. Press the standby button on Keypad and Power on the Switch
4. Release the button when the upgrade progress bar started on LED Screen
5. Do Not Power off during Upgrade Process.

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issues during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

LDD.H510 firmware for free download:

LDD-H510.A_firmware

LDD-H510.B_firmware

LDD-H510.B138_firmware

HK.T.RDA8501CP531 LED TV Control Card

HK.T.RDA8501CP531 is a multi-purpose and energy-efficient LCD/LED TV universal combo control board with a single/dual 8-bit LVDS interface. HK_T_RDA8501CP531 supports resolution panel up to 1920×1080.HK-T-RDA8501CP531 multimedia playback function and software upgrade are applicable by the USB port.

Basic Info:

Model No. HK.T.RDA8501CP531

Main Chipset: RDA8501C

Display Format: 1080p

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes (English/French/Spanish/Portuguese/Chinese)

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2.5 Watt (8 ohm)

Panel Voltage: 3.3V/5V/12V (jumper cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

Electrical Parameters:

Working Input Voltage: DC +12 Volt or AC220v

Maximum Current: 3000mA (Without Panel)

Standby Power: <0.6W (for the mainboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plug in the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the Udisk
5. Note that It will take maximum one minute to upgrade the firmware

Factory Service Mode:

Menu+1147

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

HK.T.RDA8501CP531 Firmware All resolutions Free Download Here :

TP.MS338.PB818 Universal Smart Board

TP.MS338.PB818 is a universal smart integrated board with an Android wifi network function. TP MS338 PB818 is Three in One Network Driver Wifi Board that can support up to 26 to 46-inch screens. TP_MS338_PB818 can be equipped with various screens.

General Specifications:

Brand/Mark: FHD Smart LED TV Main Board

Main Borad Model: TP.MS338.PB818

Main Chipset: DTMB: MSD6A338ST-WL OR MSD6A338ST-003J

OS: Android 4.4

CPU: A7*2

CPU Frequency: 1GHz

GPU: Mali400*2

GPU Frequency: 550MHz

Ram: 512Mb/1 Gb

Rom: 4Gb/8Gb eMMC

Backlight: 30v to 160v 45w

Audio Output: 2x8w

Resolution: upto 1920×1080 (26” to 46″)

Service Code: Menu+1147

Note: The following given Mitashi MiDE032v20 HS firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dumping files then read here first.

How to Download Mitashi MiDE032v02 HS Firmware:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

TP.MS338.PB818 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

V.TV9G02 Universal LED TV Board

V.TV9G02 is a universal TV control board designed for Asia‐Pacific and Middle-East markets. V_TV9G_02 board has excellent and mature performance. V-TV9G-02 can support LCD and LED panels, and the maximum resolution supported is 1920×1080 Full HD. LA MV56U A can drive an LCD or LED panel smaller than 26 inches to get a cost‐effective and high-performance and popular flat-panel analog TV set.

Basic Info:

Model No. V.TV9G02

Main Chipset: TSUMV59XC

Display Format: 1080P

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes (English/French/Spanish/Portuguese/Chinese)

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 2.5 Watt (8 ohm)

Panel Voltage: 3.3V/5V/12V (jumper cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.6W (for the mainboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required bin file in the FAT32 USB Disk
2. Connect the U disk to the Mainboard
3. Switch ON the TV, it will start flashing, Wait for the indicator led stops flashing
4. Done. Unplug the U-disk
5. Note that It will take max one minute to upgrade the firmware

Factory Service Mode:

Menu+1147

Note: Following firmware collection is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

V.TV9G02 Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.