Tag Archives: kazmi elecom

VS.T59B-V2.0 Universal Board

VS.T59B-V2.0 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels with a resolution is up to 1920×1080 Full HD. Its USB interface supports Multimedia Playback and Software Upgrades as well. Its HDMI port support 1.4 and its HDCP support 3.0. VS.T59B V2.0 is compatible with 10-40 inch screens. VS.T59B_V2.0 is wide-screen supported and also has the multi-language option. VS.T59B-V2.0 has the special feature of Multiple AV ports. VS.T59B-V2.0 all resolution firmware files are given below for the help of technicians.

General Specifications:

Model: VS.T59B-V2.0

Main Chipset: TSUMV59XU/ TSUMV29LU

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu 1147, Input/Source+2008

Note: The following firmware file is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T59B-V2.0 Firmware Free Download:

• VS.T59B-V2.0 1280×1024-Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

JUC7.820.00205337 LED TV Board

JUC7.820.00205337 is a simple ATV and DTV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUC7.820.00205337 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00205337

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: 8Mb

Sound Chip:

Tuner IC: ATV&DTV

Screen supported: 48-55 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

JUC7.820.00205337 firmware for free download:

• JUC7-820-00205337 BBK-49
• JUC7-820-00205337 BBK-50
• JUC7-820-00205337 CONDOR-50
• JUC7-820-00205337 CONDOR-55
• JUC7-820-00205337 DEXP-49
• JUC7-820-00205337 HYUNDAI-48

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.HD8503.03D Universal Board

T.HD8503.03D is an analog LCD/LED a multi-purpose and energy-efficient driver Controller Board that is suitable with most types of panels but not all. This board is designed for especially the Asia Pacific and the Middle East. T.HD8503 03D can support the Russian language also. T.HD8503-03D supports high screen 1920×1080, 7-55 inch LVDS screens. Not only USB interface can be used to play Video/music/photo formats are supported but it is not supported AC3 Audio, you can also display a boot photo or LOGO as well and can upgrade/install software with it.

General Specifications:

Model: T.HD8503.03D

Main Chipset: RDA8503C

OSD Language: Russian, English, Chinese, French, German, Italian, Burmese

Panel Size: 7-55 inch LVDS screen

Max Resolution: 1920*1080

Input Interface: PC / HDMI / TV / USB multimedia playing

Panel Power Voltage: 3.3V,5V,12V

Interface: Single/Dual LVDS(6/8bit)

Max Audio Output Power: 2x3W(4Ω)

EARPHONE: 2*10mW(32ohm)(max)

FR input: ATV Receiving

Video System: PAL, SECAM, NTSC

Power Input: DC 12V 3-5A, 4A is the best

Standby Power Consumption: <0.5W(board only)

Note:  The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required resolution and then extract it you will get the folder. For More Details about the download process, watch the video Click Here

T.HD8503.03D Firmware All Resolutions for Free Download:

• T-HD8503-03D 640×480-USB
• T-HD8503-03D 800×600-USB
• T-HD8503-03D 1024×600-USB
• T-HD8503-03D 1024×768-USB
• T-HD8503-03D 1280×768-USB
• T-HD8503-03D 1280×800-USB
• T-HD8503-03D 1280×960-USB
• T-HD8503-03D 1280×1024-USB
• T-HD8503-03D 1366×768-USB
• T-HD8503-03D 1400×1050-USB
• T-HD8503-03D 1440×900-USB
• T-HD8503-03D 1600×900-USB
• T-HD8503-03D 1600×1200-USB
• T-HD8503-03D 1680×1050-USB
• T-HD8503-03D 1920×1080-USB
• T-HD8503-03D 1920×1200-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

VS.T59B-V3.0 Universal Board

VS.T59B-V3.0 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels with a resolution is up to 1920×1080 Full HD. Its USB interface supports Multimedia Playback and Software Upgrades as well. Its HDMI port support 1.4 and its HDCP support 3.0. VS.T59B V3.0 is compatible with 10-40 inch screens. VS.T59B_V3.0 is wide-screen supported and also has the multi-language option. VS.T59B-V3.0 has the special feature of Multiple AV ports. VS.T59B-V3.0 all resolution firmware files are given below for the help of technicians.

General Specifications:

Model: VS.T59B-V3.0

Main Chipset: TSUMV59XU/ TSUMV29LU

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu 1147, Input/Source+308

Note: The following firmware file is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T59B-V3.0 Firmware All resolutions Free Download:

• VS-T59B-V3.0 V29 1024×768
• VS-T59B-V3.0 V29 1280×768
• VS-T59B-V3.0 V29 1280×1024
• VS-T59B-V3.0 V29 1366×768
• VS-T59B-V3.0 V29 1400×1050
• VS-T59B-V3.0 V29 1440×900
• VS-T59B-V3.0 V29 1600×900
• VS-T59B-V3.0 V29 1600×1200
• VS-T59B-V3.0 V29 1680×1050
• VS-T59B-V3.0 V29 1920×1080
• VS-T59B-V3.0 V29 1920×1200
• VS.T59B-V3.0 V29 All-Resolutions

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

JUC7.820.00074845 LED TV Board

JUC7.820.00074845 is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUC7.820.00074845 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00074845

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: Mb

Sound Chip:

Tuner IC:

Screen supported: 29-39 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

JUC7.820.00074845 firmware for free download:

• JUC7-820-00074845 ARTEL ARTLED 5000-32
• JUC7-820-00074845 CHANGHONG E29A6500A
• JUC7-820-00074845 CHANGHONG LED29A6500D

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

B.TR901E 7432 LCD TV Board

B.TR901E 7432 is a universal LCD driver Board that has HD resolution Supported up to 1366×768. B-TR901E is a non-combo board which means the main power supply and LCD backlight driver board are required separately while the ATV module and sound card are built in. It has all the connectivity interface for the user’s requirements like HDMI port, VGA Interface, TV Tuner, RCA connectivity, and Scart. The firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: B.TR901E 7432

Main Chip: TDA15021

TV System: PAL\SECAM\NTSC PLAYBACK

Product: LCD TV

Input Voltage: 12V DC

MAX Backlight Watt: NA

Backlight Current: NA

Resolution: up to 1366×768

Flash size: 1 MB

EEPROM: 24C64

AUDIO:

Tuner: DTT-8A1C/T1146, TDQ-6F6/T1260W

Service Menu:

Source

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

B.TR901E 7432 firmware for free download:

• B-TR901E-7432 AKAI-32
• B-TR901E-7432 HORIZONT-32
• B-TR901E-7432 HYUNDAI-32
• B-TR901E-7432 IZUMI-32
• B-TR901E-7432 ORION-32
• B-TR901E-7432 PROSONIC-32
• B-TR901E-7432 STREAM-32

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TP.S512C.PB771 LED TV Board

TP.S512C.PB771 is a simple DVB + SAT Driver Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This Combo Board has the integration of the main power module, LED Backlight Inverter Circuit, and ATV Card in a single piece of a motherboard. This has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack. TP_S512C_PB771 is compatible with all panel screens of backlight current 350mA-600mA depending on hardware specifications. TP-S512C-PB771 firmware files are shared in this post below for the technician’s support.

General Specifications:

Brand/Mark: Universal HD Three-in-One Board

Model: TP.S512C.PB771 RD512V

Main Chip: RD512

Product: LED TV

LED Backlight Capacity: 300-350mA

LED Backlight: 36~63V

Flash IC: 8Mb

Screen supported: 32-40 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Tuner: DVB + SAT

Mirror Option: NA

Service Code:

Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

TP.S512C.PB771 firmware for free download:

• TP-S512C-PB771 TCL-32-LVW320NDEL
• TP-S512C-PB771 TCL-32-ST3151A05-8
• TP-S512C-PB771 TCL-32-V320BJ8-Q01

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

VS.T59B-V1.1 Universal Board

VS.T59B-V1.1 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels with a resolution is up to 1920×1080 Full HD. Its USB interface supports Multimedia Playback and Software Upgrades as well. Its HDMI port support 1.4 and its HDCP support 1.1. VS.T59B V1.1 is compatible with 10-40 inch screens. VS.T59B_V1.1 is wide-screen supported and also has the multi-language option. VS.T59B-V1.1 has the special feature of Multiple AV ports. VS.T59B-V1.1 all resolution firmware files are given below for the help of technicians.

General Specifications:

Model: VS.T59B-V1.1

Main Chipset: TSUMV59XU/ TSUMV29LU

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu 1147, Input/Source+308

Note: The following firmware file is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T59B-V1.1 Firmware All resolutions Free Download:

• VS-T59B-V1.1 1366×768-Software
• VS-T59B-V1.1 1920X1080-Software

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-F3H Universal Board

ST239-F3H is a multi-purpose LCD controller board, it is suitable Asia market, and it is designed to support a FULL HD LCD panel. ST239 F3H can support PC-RGB, HDMI/S-Video (option), AV/YPBPR (Option), USB, VGA, and TV signal input. It can also support Earphone output.

Basic Info:

Model No. ST239-F3H

Main Chipset: TSUMV59XU-Z1/TSUMV29

Trademark: Universal

Display Format: up to 1920×1080

SPI Memory: 2/4MB

Sound IC: 1517P

Bin Name: .bin

Firmware Type: USB Bootable

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (.bin) to the U disk based on your screen size.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu 1147

Note: The following given Software is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

ST239-F3H Firmware Free Download Here :

• ST239.F3H V29-1024×768-USB
• ST239.F3H V29-1280×1024-USB
• ST239.F3H V29-1366×768-USB
• ST239.F3H V29-1400×1050-USB
• ST239.F3H V29-1440×900-USB
• ST239.F3H V29-1600×900-USB
• ST239.F3H V29-1600×1200-USB
• ST239.F3H V29-1680×1050-USB
• ST239.F3H V29-1920×1080-USB
• ST239.F3H V29-1920×1200-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MS18VG.75B LED TV Board

T.MS18VG.75B is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels which have a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software upgrades as well. T_MS18VG_75B has multiple HDMI ports that support 1.4 and its HDCP supports 1.1. T.MS18VG.75B is compatible with Non-HD and FHD LCD/LED panel screens. T.MS18VG.75B 12073 is widescreen-supported and also has a multi-language option. T.MS18VG.75B has its special feature of  AV.T.MS18VG.75B software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: T-MS18VG-75B 12073

Main Chipset: TSUMV59

Tuner: CDT-3SP512-36

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Firmware Type: Backup Dump

Service Menu: Menu 1147

Note: The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MS18VG.75B firmware for free download:

• T-MS18VG-75B-12073 AKAI-32-DUMP
• T-MS18VG-75B-12073 SONY-32-DUMP
• T-MS18VG-75B-12073 WANSA-FHD-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.