Tag Archives: kazmi elecom

ST239-FP6 LED TV Board

ST239-FP6 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-FP6 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-FP6

Main Chip: TSUMV59XU-Z1

Product: LCD/LED TV

LED Backlight: 85v 300mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: 32 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: NA

Firmware Type: Backup Dump

Service Code:

Source/Input 2580 Menu 1147

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-FP6 firmware for free download:

• ST239.FP6 SG-3S3205D-INVERTED-DUMP
• ST239.FP6 SG-3S3205D-NORMAL-DUMP
• ST239.FP6 UNICOM 32D01-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

JUC7.820.00018451 LCD TV Board

JUC7.820.00018451 is a simple ATV and DTV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUC7.820.00018451 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00018451

Chassis: LS23

Main Chip: MST721DU-LF

Product: LCD TV

LED Backlight: mA

Flash IC: 25X40

Sound Chip: TDA1517P

Tuner IC: ATV

Screen supported: 19-29 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

JUC7.820.00037562 firmware for free download:

• JUC7-820-00018451 CHANGHONG LT22610
• JUC7-820-00018451 CHANGHONG LT22620
• JUC7-820-00018451 CHANGHONG LT22629
• JUC7-820-00018451 CHANGHONG LT22710
• JUC7-820-00018451 CHANGHONG LT22810

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

P65-59S V6.1 LED TV Board

P65-59S V6.1 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. P65-59S V6.1 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: P65-59S V6.1-A-B-C

Main Chip: TSUMV59

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: 32-inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: MERGE.bin

Firmware Type: USB boot & Backup Dump

Service Code:

Source/Input 2580 Menu 1147

Note: The following firmware is a backup file and USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

P65-59S V6.1 firmware for free download:

• P65-59S-V6.1 KORECHI HD-3408-DUMP
• P65-59S-V6.1 LED32C610-DUMP
• P65-59S-V6.1 ONIDA-32MVH-DUMP
• P65-59S-V6.1 ROWA-32L50-DUMP
• P65-59S-V6.1-B JINZHENG B2232-DUMP
• P65-59S-V6.1-B PANWOODS LED32-DUMP
• P65-59S-V6.1-C AMOI H32A-FLIP-DUMP
• P65-59S-V6.1-C AMOI H32A-NORMAL-DUMP
• P65-59S-V6.1-C DIGITAL-32-DUMP
• P65-59S-V6.1-C ONIDA-32HS-DUMP
• P65-59S-V6.1 1366×768-USB
• P65-59S-V6.1 1920×1080-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-FP10 LED TV Board

ST239-FP10 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-FP10 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-FP10

Main Chip: TSUMV59XU-Z1

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: 32 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: NA

Firmware Type: Backup Dump

Service Code:

Source/Input 2580 Menu 1147

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-FP10 firmware for free download:

• ST239.FP10 1366×768-LG-DUMP
• ST239.FP10 1366X768-MIRROR-DUMP
• ST239.FP10 JINZHENG-32-DUMP
• ST239.FP10 SOKKIA-32-DUMP
• ST239.FP10 TCL-32-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

JUC7.820.00037562 LED TV Board

JUC7.820.00037562 is a simple ATV and DTV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUC7.820.00037562 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00037562

Main Chip: MT8223

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC: ATV

Screen supported: 19-39 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

JUC7.820.00037562 firmware for free download:

• JUC7-820-00037562 CHANGHONG LED19-DUMP
• JUC7-820-00037562 CHANGHONG LM32-DUMP
• JUC7-820-00037562 CHANGHONG LT32-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

VS.T59B_V4.3 Universal Board

VS.T59B_V4.3 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels with a resolution is up to 1920×1080 Full HD. Its USB interface supports Multimedia Playback and Software Upgrades as well. Its HDMI port support 1.4 and its HDCP support 3.0. VS.T59B V4.3 is compatible with 10-40 inch screens. VS.T59B_V4.3 is wide-screen supported and also has the multi-language option. VS.T59B-V4.3 has the special feature of Multiple AV ports. VS.T59B-V4.3all resolution firmware files are given below for the help of technicians.

General Specifications:

Model: VS.T59B_V4.3

Main Chipset: TSUMV59XU

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu 1147, Input/Source+2008

Note: The following firmware file is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T59B_V4.3 Firmware Free Download:

• VS.T59B-V4.3 1280×1024-Dump
• VS.T59B-V4.3 1680×1050-Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-FP8 LED TV Board

ST239-FP8 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-FP8 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-FP8

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name:

Firmware Type: Backup Dump

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-FP8 firmware for free download:

• ST239-FP8 1366×768-EUROSTAR T32LED

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

JUC7.820.00064337 LED TV Board

JUC7.820.00064337 is a simple ATV and DTV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUC7.820.00064337 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00064337

Main Chip: MST6M182VG-LF

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC: ATV

Screen supported: 32-39 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

JUC7.820.00064337 firmware for free download:

• JUC7-820-00064337 CHANGHONG-24B1K-USB
• JUC7-820-00064337 CHANGHONG-29B-DUMP
• JUC7-820-00064337 CHANGHONG-32B1K-DUMP
• JUC7-820-00064337 CHANGHONG-37B1K-DUMP
• JUC7-820-00064337 CHANGHONG-39SA-USB
• JUC7-820-00064337 CHANGHONG-39B2K-DUMP
• JUC7-820-00064337 CHANGHONG-42B2K-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

VS.T59B_V4.2 Universal Board

VS.T59B_V4.2 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels with a resolution is up to 1920×1080 Full HD. Its USB interface supports Multimedia Playback and Software Upgrades as well. Its HDMI port support 1.4 and its HDCP support 3.0. VS.T59B V4.2 is compatible with 10-40 inch screens. VS.T59B_V4.2 is wide-screen supported and also has the multi-language option. VS.T59B-V4.2 has the special feature of Multiple AV ports. VS.T59B-V4.2all resolution firmware files are given below for the help of technicians.

General Specifications:

Model: VS.T59B_V4.2

Main Chipset: TSUMV59XU/ TSUMV29LU

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu 1147, Input/Source+2008

Note: The following firmware file is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T59B_V4.2 Firmware Free Download:

• VS.T59B_V4.2 1280×768-Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

KK.RU10.671 Universal Board

KK.RU10.671 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. KK.RU10.671 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: KK.RU10.671

Main Chip: Unisoc UTS671-X

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC: NA

Screen supported: 24 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: NA

Firmware Type: Backup Dump

Resolution Code:

• 1920X1080 INPUT/SOURCE 4032
• 1366X768 INPUT/SOURCE 4031

Factory Service Mode:

Source/Input 185

Note:  The following firmware is a backup dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

KK.RU10.671 firmware for free download:

• KK.RU10.671 Multi-Resolution-Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.