Home / Chinese Brand / T.V56.81 Firmware Free Download

T.V56.81 Firmware Free Download

T.V56.81 Firmware

T.V56.81 FHD LCD Driver Board

T.V56.81 Full HD LCD Universal Driver Board has three HDMI, Dual AVVideo Support USB Playback TV Board. It Supports multi OSD languages. This universal LCD control board supports a lot of panels. Max supports Full HD LCD tv main board 1920X1080 resolution TFT-LCD  7″ to 50 ” screen. it can Dynamically adjust the picture’s color, contrast ratio, definition and so on. it Automatically detects input video format. T.V56.81 supports the USB upgrade. T.V56.81 firmware given below for the Technician’s support.

T_V56_81_firmware

T_V56_81_software

Basic Info :

Model No. T.V56.81

Main Chipset: TSUMV56RUU-Z1

Tuner: R842

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications & Features:

TV System: PAL/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Source/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +12V

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt 4Amp

Maximum Current: 4000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

  • Empty the USB disk or Formate in FAT32
  • Copy the required resolution file (*. Bin file) to the USB disk
  • Connect the USB disk with the mainboard
  • Connect the Keyboard and TV Mainboard
  • Connect the power supply, check the keyboard light. If there is a flashing light,
    that is in the written program, waiting for the light turn to Green, work is done.

Note: If there is no flashing light, please cut off the power supply, then connect the USB disk once
again, then connect the power supply again, and if the power supply can’t be cut off *The same firmware can only be burned once a time

Factory Service Mode:

Menu+1147

 

T.V56.81 Firmware Free Download Here :

 

S.NO.BOARD/DESCRIPTIONDOWNLOAD LINK
1T.V56.81_1366x768_M90_FirmwareDownload
2T.V56.81_1920x1080_M90_FirmwareDownload

 

About kazmielecom

Check Also

Kazmi-Elecom

T.MS6M181.1B Firmware Free Download

T.MS6M181.1B LCD TV Driver Board T.MS6M181.1B-11223 is an analog LCD/LED TV Control Board which is …

4 comments

  1. Hello,

    how it works with 2ch 10bit LVDS? Which firmware use 1920×1080 2ch 10bit 60Hz?
    I know these modules, but all which i know works with 8bit and isn´t normally possible get FW with 2ch 10bit 60Hz.

    I need module for SHARP LCD LK400Dxxx (1920×1080 2ch 10bit 60Hz)from TV LC-40LE810.

    Thank you

    BR

    Ludek

  2. VIJAY BHASKER REDDY

    good suport

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

error: Content is protected !!