Tag Archives: universal board software

CV56BL-Y24 LED TV Board

CV56BL-Y24 is a simple ATV Universal Driver Motherboard designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. CV56BL-Y24 is a combo board that is suitable for many LCD or LED panel screens. CV56BL_Y24 has a built-in power module and LED Backlight driver module with ATV RF Tuner. This has all the features as per the latest requirements and connectivity ports like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack.

General Specifications:

Brand/Mark: Universal Jumper Board

Model: CV56BL- Y24

Main Chip: TSUMV56RUU-Z1

Product: LED TV

LED Backlight: 300 mA

Flash IC: 4Mb

Sound IC:

Screen supported: 15-60 inch

Resolution: Up to 1920×1080

Panel Voltage:  5V, 12V

Power Input: AC220

Service Code:

Source/Input+2580

Note: The following given software/firmware is USB upgradeable and Backup Dump Files. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here are below some CV56BL-Y24 firmware for free download:

• CV56BL_Y24_1366X768_COSCO_Dump
• CV56BL_Y24_1920x1080_EGO_Dump
• CV56BL-Y24_1920x1080_ICONIC_Dump

GSL-V59XU-Z1 Universal Board

Basic Info:

Model No. GSL-V59XU-Z1

Main Chipset: TSUMV59XU-Z1

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: Following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download Firmware File:

Download your required file of the following firmware and then extract it you will get the folder. Now you can write the file with a programming tool. for More Detail about the download, process watch the video Click Here

GSL-V59XU-Z1 Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

New Universal LCD/LED Controller Board

Basic Info:

Model No. T.R83.03 V3

Main Chipset: RDA 8503C

Trademark: CXEL

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware T.R.83.03 Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plug in the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following given software/firmware is USB Bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of loading/installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download T.R83.03 Firmware:

Download the following given firmware/software and then extract you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

T.R83.03 Firmware All resolutions Free Download Here :