Tag Archives: T.VST29.03B program data

MSVST29 Firmware Free Download

MSVST29 Firmware Collection

MSVST29 Software collection is shared in this post.

Basic Info:

Model No. T.VST29.02B, T.VST29.02C, T.VST29.03B, T.VST29.A8

Main Chipset: TSUMV29, TSUMV39, TSUMV59

Trademark: Leroy

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Screen Supported: 8.9-42 inch

Msvst29-T.vst29.02B_Firmware

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: LVDS single 6 single 8 -bis 6 -bis 8

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt, 4 Amp

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

 

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program (*. Bin file) to the U disk.

Step 3: Connect the U disk with Mainboard

Step 4: Connect the Keypad and IR also

Step 5: Connect the power supply, check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, then connect the power supply again,

Factory Service Mode:

Menu+1147

T.vst29.02C_Firmware

Note: Following MSVST29 firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download MSVST29 Firmware File:

Download all parts of the following MSVST29 firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

MSVST29 Firmware All resolutions Free Download Here :

Kazmi-Elecom

S.NO.BOARD/DESCRIPTIONDOWNLOAD LINK
1T.VST29.02B_USB_Firmware.part1Download
T.VST29.02B_USB_Firmware.part2Download
T.VST29.02B_USB_Firmware.part3Download
T.VST29.02B_USB_Firmware.part4Download
T.VST29.02B_USB_Firmware.part5Download
T.VST29.02B_USB_Firmware.part6Download
T.VST29.02B_USB_Firmware.part7Download
T.VST29.02B_USB_Firmware.part8Download
T.VST29.02B_USB_Firmware.part9Download
T.VST29.02B_USB_Firmware.part10Download
2T.VST29.02C_USB_Firmware.part1Download
T.VST29.02C_USB_Firmware.part2Download
T.VST29.02C_USB_Firmware.part3Download
3T.VST29.03B_USB_Firmware.part1Download
T.VST29.03B_USB_Firmware.part2Download
T.VST29.03B_USB_Firmware.part3Download
4T.VST29.A8_USB_Firmware.part1Download
T.VST29.A8_USB_Firmware.part2Download
error: Content is protected !!