Tag Archives: lcd/led tv software free download

T.R67.031 Universal LCD/LED Controller Board

T.R67.031 All Resolution Software Files are shared in this post.

Basic Info:

Model No. T.R67.031

Main Chipset: RDA6710

Trademark: CXEL

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Board Size: 168.00 X 42.0 (mm)

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software in FAT32 USB Disk
2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
3. Switch ON the power and Wait even IR indicator led stops flashing
4. Done. Unplug the U-disk (It will take a max of half min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are facing any issue during firmware installation then visit and read here first.

How to Download Firmware Files:

Download all parts of the following firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

T.R67.031 Firmware All resolutions Free Download Here :

CV638H-E42 Firmware

CV638H-E42 is an Intelligent network drive board with a resolution of 1920×1080. 3MS638AU_CV638H_E42 is three in one LED TV Smart Board. It has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain ultra HD Wide Screen with better to work SMART. 3MS638AU-CV638H E42 has the full features of input interface connectivity. It has multiple ports like HDMI, AV, Headphone, VGA interface, USB ports and RJ45 Ethernet port for wired internet connectivity. Its USB interface can be used for Firmware upgrade and as well as for multimedia playback. CV638H-E42 china smart network board can support up to 46″ screen panels. CV638H-E42 firmware is available for technician’s support.

General Specifications:

Model Name: 3MS638AU CV638H-E42  (Smart Android Platform)

Main Chipset:

Resolution: 1920×1080

Aspect Ratio: 16:09

OS Version: Android 4.4

CPU: Dual Core

Ram: 1GB

Rom: 4 GB

Backlight: 66v/300ma

Audio Power Output: 20w (10×2)

System: PAL/NTSC

WIFI Antenna: Yes (Built-in)

Firmware: CtvUpgrade.bin

Firmware Type: USB Updateable Firmware

Note: The following given software/firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware/software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here is below CV638H-E42 Firmware for free download:

Philips 49PUS7909/12 Firmware

Philips 49PUS7909 4K ULTRA HD Smart TV

Philips 49PUS7909/12 7900 series Ultra Slim 4K UHD TV powered by Android™ 49PUS7909 123 cm (49″) 4K Ultra HD LED TV Quad Core Twin Tuner DVB-T/T2/C/S/S2 with Ambilight 2-sided and Pixel Precise Ultra HD. Philips 49PUS7909 Ultra HD TV has 4 times the resolution of a conventional Full HD TV. With over 8 million pixels and our unique Pixel Plus Ultra HD engine, you’ll experience improved images, sharpness, increased depth perception, superior contrast, smooth natural motion, and flawless details.

Its IPS displays use advanced technology that gives you extra-wide viewing angles of 178/178 degrees, making it possible to view the display from almost any angle. The USB connector allows access to jpeg photos, mp3 music, and video files through USB drives. Plug the USB into the slot at the side of the TV and access multimedia content using the easy on-screen content browser. Now view your videos, photos, and music effortlessly on your TV.

Technical Specifications:

Brand/Make: Philips

Model: 49PUS7909/12

Diagonal screen size (inch): 49 inch
Panel resolution: 3840×2160

Main Board: 715rlpcb0000000401

Processor: 4-Cores

User memory: 1.6 GB

OS Version: 4.2.2

Lifestyle apps: Facebook, Google Apps, Skype, Twitter

On-Screen Display languages: English
Screen Format Adjustments: 16:9

Sound Output power (RMS): 25W
Sound System: Stereo
Sound Enhancement
Auto Volume Leveller

Number of HDMI connections: 4
Number of USB connections: 3
Number of AV connections: 1

Number of Tuners: 2 tuner(s)

Tuner type: Analog & Digital
Analog signal format system: NTSC, PAL, SECAM
Digital signal format system: DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2

Power consumption: 85 W
Power supply: 100-240VAC, 50/60Hz
Standby power consumption: 0.3 watt

Note: The following given Software is a backup Dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download firmware files:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

Philips 49PUS7909/12 firmware for free download:

For video tutorials, visit “Kazmi Elecom” my youtube channel.

CV538H-A 4K LED TV Driver Board

CV538H-A is an Intelligent 4K network drive board with a resolution of 3840×2160. CV538H_A is dedicated to 60 Hz screens. It has a powerful wifi system. Smart UHD TV With Android Platform and great features to entertain ultra HD Wide Screen with better to work SMART. CV538H A has the full features of input interface connectivity. It has multiple ports like HDMI, AV, Headphone, VGA interface, USB ports and RJ45 Ethernet port for wired internet connectivity.

Its USB interface can be used for Firmware upgrade and as well as for multimedia playback. CV538H_A is a digital and analog TV board, it can receive the analogtelevision (PAL/SECAM) and digital television (DVB-T/T2/C/S2) signal. CV538H-A Firmware file is given here below for Technician’s support.

General Specifications:

Model Name: CV538H-A  (Smart UHD With Android Platform)

Resolution: 3840*2160

Aspect Ratio: 16:09

OS Version: Android 6.0

Audio Power Output: 20w (10×2)

System: PAL//SECAM

WIFI Antenna: Yes (Built-in)

PC Compatible: Yes (via HDMI/VGA)

HDMI: 3 ( HDMI1.4 *1, HDMI2.0 *2 )

YPbPr: 1 YPBPR

AV IN: 1 AV

USB Ports: USB2.0 *3

Power Rating: 220V~240V 50Hz/60Hz

Power Consumption: 150Watt

Firmware: CtvUpgrade.bin

Firmware Type: USB Updateable Firmware

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch the video Click Here

Here is below CV538H-A Firmware for free download:

Firmware File:

CV538H_A_3840x2160_Blaupunkt\538H-A-Blaupunkt_LC600EGE-20180627165116.rar

CV538H_A_3840x2160_FuJiCom\T201805054A-CNC-538H-A-FuJiCom-HV550QUB_H11-12V-7KEY-MO18001027-20180601164859.zip

CV538H_A_3840x2160_Myros LINXIA\T201806055A-CNC-MyrosLINXIA-538H-A-LSC750FF02-8KEY-8Ω-MOXXXXX-20180620084834.rar

CV538H_A_3840x2160_Smartbook\T201803201A-CNC-538H-A-SMARTBOOK-HV550QUB_H11-MO18000938-20180709152801.rar

GT.56J.01 & GSD56JIT0 Firmware

GT.56J.01 & GSD56JIT0 is a universal LCD/LED TV Controller board that is designed for Asian countries and supports the English menu language as well. GT.56J.01 & GSD56JIT0 supports a high screen resolution of 1920×1080 panels. GT.56J.01 & GSD56JIT0 are compatible with 7-55″ LVDS screens but do not support all panels.

Basic Info:

Model No. GT.56J.01, GSD56JIT0

Main Chipset: TSUMV56

Support Language: English, Chinese, French, Vietnamese

Display Format: 720p

Max Resolution: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Mirror Enable: Yes

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt 4Amp

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/Installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the required resolution file to USB and install. for More Detail about the download, process watch the video Click Here

GT.56J.01 & GSD56JIT0 Firmware All resolutions Free Download Here :

For video tutorials, visit “Kazmi Elecom” my youtube channel.

TP.MS338E.PB803 Firmware

TP.MS338E.PB803 Smart Android LED TV Board

TP.MS338E.PB803 is an android network driver board with an FHD resolution of 1920×1080. TP.MS338E_PB803 has a powerful wifi system. Smart FHD TV With Android Platform and great features to entertain Full HD Wide Screen with better to work SMART. TP.MS338E PB803 Smart Board has multiple ports of A/V, USB interface Ports, and many HDMI ports as well in addition to VGA, Scart, and Earphones also. TP.MS338E-PB803 has a LAN/RJ45 Connector interface port also for the wired internet network.

TP_MS338E_PB803 is a Combo Network Triple play board that has the Digital TV tuner built-in in it. The Graphics and Sound quality of the TP.MS338E-PB803 android board are very good and the Response rate is very efficient. TP.MS338E-PB803 china smart network board can support up to 55″ screen panels. TP.MS338E.PB803 firmware is available for technician support.

General Specifications:

Brand/Mark: FHD Smart DVB-T2 LED TV Main Board

Main Board Model: TP.MS338E.PB803

Main Chipset: MSD6A338SXEG-005N

OS: Android 4.4

CPU: A7*2

CPU Frequency: 1GHz

GPU: Mali400*2

GPU Frequency: 550MHz

Ram: 512Mb/1 Gb

Rom: 4/8 Gb eMMC

Backlight: 30v to 160v 45w 560mA

Audio Output: 2x8w

Resolution: up-to 1920×1080 (32” to 55″)

Service Code: Menu+1147

Operating Voltage: 100V-240VAC 50/60Hz

Power Consumption: 100W

Note: The following given firmware is USB upgradeable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/Installing the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of the following given firmware and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about the download process watch the video Click Here

How to Install:

• Copy the .bin file into the USB disk
• Connect the U-Disk with the TV
• Switch on the TV
• Standby lights start flashing. when light flashing speed increases it means it’s complete.
• Switch OFF, Remove the Disk and Switch ON again. Done

Here are some TP.MS338E.PB803 firmware for free download:

Firmware Name;

TP_MS338E_PB803_1920x1080_HUGO_REF40\CP300741_TP_MS338E_PB803_KOSOVO_PT430CT01_1_IR_G_GOLD_LOGO_HUGO_4G_REF40_77deb3c3_20180227_145143.zip

TP_MS338E_PB803_1920x1080_HUGO_REF75\CF171106 ST4851B01-1\CP300742_TP_MS338E_PB803_ST4851B03_3_IR_G_GOLD_LOGO_HUGO_4G_REF75_071bf5d6_20180207_154718.zip

TP_MS338E_PB803_1366x768_VIVAX_REF60\CP306878_MX_MACC17_0851XXXX_MS338E_PB803_GERMAN_LSC320AN10_8G_REF60_DD_64dca3a6_20180723_153331.zip

TP_MS338E_PB803_1920x1080_AKAI_EMMC\AKAI-TP.MS338E.PB803-1920X1080-EMMC SOFTWARE