Tag Archives: kazmi electronics

ST239-FP10 LED TV Board

ST239-FP10 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-FP10 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-FP10

Main Chip: TSUMV59XU-Z1

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: 32 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: NA

Firmware Type: Backup Dump

Service Code:

Source/Input 2580 Menu 1147

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-FP10 firmware for free download:

• ST239.FP10 1366×768-LG-DUMP
• ST239.FP10 1366X768-MIRROR-DUMP
• ST239.FP10 JINZHENG-32-DUMP
• ST239.FP10 SOKKIA-32-DUMP
• ST239.FP10 TCL-32-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

JUC7.820.00037562 LED TV Board

JUC7.820.00037562 is a simple ATV and DTV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUC7.820.00037562 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00037562

Main Chip: MT8223

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC: ATV

Screen supported: 19-39 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

JUC7.820.00037562 firmware for free download:

• JUC7-820-00037562 CHANGHONG LED19-DUMP
• JUC7-820-00037562 CHANGHONG LM32-DUMP
• JUC7-820-00037562 CHANGHONG LT32-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

VS.T59B_V4.3 Universal Board

VS.T59B_V4.3 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels with a resolution is up to 1920×1080 Full HD. Its USB interface supports Multimedia Playback and Software Upgrades as well. Its HDMI port support 1.4 and its HDCP support 3.0. VS.T59B V4.3 is compatible with 10-40 inch screens. VS.T59B_V4.3 is wide-screen supported and also has the multi-language option. VS.T59B-V4.3 has the special feature of Multiple AV ports. VS.T59B-V4.3all resolution firmware files are given below for the help of technicians.

General Specifications:

Model: VS.T59B_V4.3

Main Chipset: TSUMV59XU

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu 1147, Input/Source+2008

Note: The following firmware file is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T59B_V4.3 Firmware Free Download:

• VS.T59B-V4.3 1280×1024-Dump
• VS.T59B-V4.3 1680×1050-Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-FP8 LED TV Board

ST239-FP8 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-FP8 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-FP8

Main Chip:

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name:

Firmware Type: Backup Dump

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-FP8 firmware for free download:

• ST239-FP8 1366×768-EUROSTAR T32LED

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

JUC7.820.00064337 LED TV Board

JUC7.820.00064337 is a simple ATV and DTV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUC7.820.00064337 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00064337

Main Chip: MST6M182VG-LF

Product: LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC: ATV

Screen supported: 32-39 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

JUC7.820.00064337 firmware for free download:

• JUC7-820-00064337 CHANGHONG-24B1K-USB
• JUC7-820-00064337 CHANGHONG-29B-DUMP
• JUC7-820-00064337 CHANGHONG-32B1K-DUMP
• JUC7-820-00064337 CHANGHONG-37B1K-DUMP
• JUC7-820-00064337 CHANGHONG-39SA-USB
• JUC7-820-00064337 CHANGHONG-39B2K-DUMP
• JUC7-820-00064337 CHANGHONG-42B2K-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

VS.T59B_V4.2 Universal Board

VS.T59B_V4.2 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels with a resolution is up to 1920×1080 Full HD. Its USB interface supports Multimedia Playback and Software Upgrades as well. Its HDMI port support 1.4 and its HDCP support 3.0. VS.T59B V4.2 is compatible with 10-40 inch screens. VS.T59B_V4.2 is wide-screen supported and also has the multi-language option. VS.T59B-V4.2 has the special feature of Multiple AV ports. VS.T59B-V4.2all resolution firmware files are given below for the help of technicians.

General Specifications:

Model: VS.T59B_V4.2

Main Chipset: TSUMV59XU/ TSUMV29LU

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu 1147, Input/Source+2008

Note: The following firmware file is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T59B_V4.2 Firmware Free Download:

• VS.T59B_V4.2 1280×768-Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

KK.RU10.671 Universal Board

KK.RU10.671 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. KK.RU10.671 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: KK.RU10.671

Main Chip: Unisoc UTS671-X

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC: NA

Screen supported: 24 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: NA

Firmware Type: Backup Dump

Resolution Code:

• 1920X1080 INPUT/SOURCE 4032
• 1366X768 INPUT/SOURCE 4031

Factory Service Mode:

Source/Input 185

Note:  The following firmware is a backup dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

KK.RU10.671 firmware for free download:

• KK.RU10.671 Multi-Resolution-Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

VS.T59B-V2.0 Universal Board

VS.T59B-V2.0 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support more than 26-inch LCD panels with a resolution is up to 1920×1080 Full HD. Its USB interface supports Multimedia Playback and Software Upgrades as well. Its HDMI port support 1.4 and its HDCP support 3.0. VS.T59B V2.0 is compatible with 10-40 inch screens. VS.T59B_V2.0 is wide-screen supported and also has the multi-language option. VS.T59B-V2.0 has the special feature of Multiple AV ports. VS.T59B-V2.0 all resolution firmware files are given below for the help of technicians.

General Specifications:

Model: VS.T59B-V2.0

Main Chipset: TSUMV59XU/ TSUMV29LU

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu 1147, Input/Source+2008

Note: The following firmware file is a backup dump. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

VS.T59B-V2.0 Firmware Free Download:

• VS.T59B-V2.0 1280×1024-Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

JUC7.820.00205337 LED TV Board

JUC7.820.00205337 is a simple ATV and DTV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUC7.820.00205337 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00205337

Main Chip:

Product: LED TV

LED Backlight: mA

Flash IC: 8Mb

Sound Chip:

Tuner IC: ATV&DTV

Screen supported: 48-55 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Service Code:

Source/Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

JUC7.820.00205337 firmware for free download:

• JUC7-820-00205337 BBK-49
• JUC7-820-00205337 BBK-50
• JUC7-820-00205337 CONDOR-50
• JUC7-820-00205337 CONDOR-55
• JUC7-820-00205337 DEXP-49
• JUC7-820-00205337 HYUNDAI-48

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.HD8503.03D Universal Board

T.HD8503.03D is an analog LCD/LED a multi-purpose and energy-efficient driver Controller Board that is suitable with most types of panels but not all. This board is designed for especially the Asia Pacific and the Middle East. T.HD8503 03D can support the Russian language also. T.HD8503-03D supports high screen 1920×1080, 7-55 inch LVDS screens. Not only USB interface can be used to play Video/music/photo formats are supported but it is not supported AC3 Audio, you can also display a boot photo or LOGO as well and can upgrade/install software with it.

General Specifications:

Model: T.HD8503.03D

Main Chipset: RDA8503C

OSD Language: Russian, English, Chinese, French, German, Italian, Burmese

Panel Size: 7-55 inch LVDS screen

Max Resolution: 1920*1080

Input Interface: PC / HDMI / TV / USB multimedia playing

Panel Power Voltage: 3.3V,5V,12V

Interface: Single/Dual LVDS(6/8bit)

Max Audio Output Power: 2x3W(4Ω)

EARPHONE: 2*10mW(32ohm)(max)

FR input: ATV Receiving

Video System: PAL, SECAM, NTSC

Power Input: DC 12V 3-5A, 4A is the best

Standby Power Consumption: <0.5W(board only)

Note:  The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

How to Download:

Download your required resolution and then extract it you will get the folder. For More Details about the download process, watch the video Click Here

T.HD8503.03D Firmware All Resolutions for Free Download:

• T-HD8503-03D 640×480-USB
• T-HD8503-03D 800×600-USB
• T-HD8503-03D 1024×600-USB
• T-HD8503-03D 1024×768-USB
• T-HD8503-03D 1280×768-USB
• T-HD8503-03D 1280×800-USB
• T-HD8503-03D 1280×960-USB
• T-HD8503-03D 1280×1024-USB
• T-HD8503-03D 1366×768-USB
• T-HD8503-03D 1400×1050-USB
• T-HD8503-03D 1440×900-USB
• T-HD8503-03D 1600×900-USB
• T-HD8503-03D 1600×1200-USB
• T-HD8503-03D 1680×1050-USB
• T-HD8503-03D 1920×1080-USB
• T-HD8503-03D 1920×1200-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.