Tag Archives: kazmi electronics

T.VST29.02B Universal Board

T.VST29.02B is a universal jumper board with multi-resolution panel screen-supported software.

Basic Info:

Model No. T.VST29.02B 11496

Main Chipset: TSUMV29LE

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

Tuner: CDT-3SP512-36

Sound: 1517P

Bin Name: MSTFLASH.bin

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Copy the Required Firmware/software into the FAT32 USB Disk
Plugin the U disk into the Mainboard USB port of the LCD/LED TV
Switch ON the power and Wait until even the IR indicator LED stops flashing
Done. Unplug the U-disk (It will take a max half a minute to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following firmware is USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

T.VST29.02B Firmware All resolutions Free Download:

• T-VST29-02B 960×540-Firmware-USB
• T-VST29-02B 1024×502-Firmware-USB
• T-VST29-02B 1024×576-Firmware-USB
• T-VST29-02B 1024×600-Firmware-USB
• T-VST29-02B 1024×768-Firmware-USB
• T-VST29-02B 1152×768-Firmware-USB
• T-VST29-02B 1280×720-Firmware-USB
• T-VST29-02B 1280×768-Firmware-USB
• T-VST29-02B 1280×800-Firmware-USB
• T-VST29-02B 1280×854-Firmware-USB
• T-VST29-02B 1280×960-Firmware-USB
• T-VST29-02B 1280×1024-Firmware-USB
• T-VST29-02B 1366×768-Firmware-USB
• T-VST29-02B 1400×1050-Firmware-USB
• T-VST29-02B 1440×900-Firmware-USB
• T-VST29-02B 1600×900-Firmware-USB
• T-VST29-02B 1600×1200-Firmware-USB
• T-VST29-02B 1680×945-Firmware-USB
• T-VST29-02B 1680×1050-Firmware-USB
• T-VST29-02B 1920×1080-Firmware-USB
• T-VST29-02B 1920×1200-Firmware-USB
• T-VST29-02B 2048×1152-Firmware-USB
• T-VST29-02B Panel-Firmware-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MSD306.8B LED TV Board

T.MSD306.8B is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but an ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. T.MSD306.8B firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: T.MSD306.8B

Main Chip: MSD306

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4/8Mb

Sound Chip: R2A15122

Tuner IC: DT82WT-3R-E

Screen supported: 26-40 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name: NA

Firmware Type: Backup Dump

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

T.MSD306.8B firmware for free download:

• T-MSD306-8B 10305 BLAUPUNKT-26-DUMP
• T-MSD306-8B 10305 BLAUPUNKT-32-DUMP
• T-MSD306-8B 10305 BLAUPUNKT-40-DUMP
• T-MSD306-8B 10305 SONIC-32-DUMP
• T-MSD306-8B 10305 TECHNIKA-32-DUMP
• T-MSD306-8B 10305 TECHNIKA-40-DUMP
• T-MSD306-8B 11164 STARLIGHT-32-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-F17H Universal Board

ST239-F14H is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-F14H firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-F17H

Main Chip: TSUMV59XU-Z1

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name: MERGE59.bin

Firmware Type: USB Bootable

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-F17H firmware for free download:

• ST239_F17H 1024×768-USB
• ST239_F17H 1280×1024-USB
• ST239_F17H 1366×768-USB
• ST239_F17H 1440×900-USB
• ST239_F17H 1600×900-USB
• ST239_F17H 1680×1050-USB
• ST239_F17H 1920×1080-USB
• ST239_F17H 1920×1200-USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

RSAG7.820.4367 LED TV Board

RSAG7.820.4367 is a non-combo HD & FHD LED TV Board. It is supported by an FHD resolution of 1920×1080 and a Refresh Rate is 50/60 hertz with a smooth motion rate of 200 SMR. It has multiple HDMI ports to connect a set-top box, Blu-Ray players, and gaming console, and also has more than one USB port to connect hard drives and other USB devices and play multimedia as well. It has a Dolby Sound system that Supports 16 Watts sound output and HDR Display viewing. RSAG7.820.4367 firmware files are given below for free of cost download to support technicians.

General Features & Specifications:

Brand: China

Board Model: RSAG7.820.4367/ROH

Display Format: FHD 1080P

Screen Type: LED

Features Format: Non-Smart

OS Version: NA

Chipset: MSD308PX-LF

Processor: V

Graphic Processor:

RAM Capacity: GB DDR3

Storage Memory: 4 Mb SPI Flash

Screen Resolution: 1920×1080

No of HDMI Ports: 3

No of USB Ports: 1

Wi-Fi Type: No

Built-In Wi-Fi: No

Ethernet (RJ45): No

Speaker Output: 16W

Tuner: ATV

Power Requirement: AC 110 – 240 V, 50/60 Hz

Power Consumption: 80 W

Firmware Type: Backup dump

Firmware Name: NA

Product: HISENSE, ROLSEN

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

RSAG7.820.4367 Firmware for free download:

• RSAG7-820-4367 HISENSE-42 HE420CG-E01
• RSAG7-820-4367 ROLSEN-42 HE420CG-E01

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

LDD.M3463.E LED TV Board

LDD.M3463.E is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. LDD.M3463.E firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: LDD.M3463.E

Main Chip: MSD3463

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 8Mb

Sound Chip:

Tuner IC:

Screen supported: 28-32 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: NA

Firmware Type: Backup Dump

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

LDD.M3463.E firmware for free download:

• LDD-M3463-E AKAI-32-DUMP
• LDD-M3463-E DEXP-32-DUMP
• LDD-M3463-E HARPER-32-DUMP
• LDD-M3463-E NESONS-28-DUMP
• LDD-M3463-E NESONS-32-DUMP
• LDD-M3463-E ORFEY-28-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-F23C LED TV Board

ST239-F23C is a simple ATV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-F23C firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-F23C

Main Chip: TSUMV29LU/TSUMV59XU-Z1

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 2Mb

Sound Chip: 1517p

Tuner IC:

Screen supported: inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 12V DC

Firmware Name:

Firmware Type: Backup Dump

Service Code:

Source/Input

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install the software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-F23C firmware for free download:

• ST239-F23C 1366×768-Dump

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

JUG7.820.1283 LED TV Board

JUG7.820.1283 is a simple ATV and DTV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUG7.820.1283 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUG7.820.1283

Chassis: LS18

Main Chip: MST721DU-LF

Product: LCD TV

LED Backlight: mA

Flash IC: 25Q32

Sound Chip:

Tuner IC: ATV

Screen supported: 29-49 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

JUG7.820.1283 firmware for free download:

• JUG7-820-1283 SABA-46-DUMP
• JUG7-820-1283 NPG-32-DUMP
• JUG7-820-1283 GRUNDIG-32-DUMP
• JUG7-820-1283 CROWN-29-DUMP
• JUG7-820-1283 CHANGHONG-29-DUMP
• JUG7-820-1283 CHANGHONG EC47F4N-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

P65-59S V6.4 LED TV Board

P65-59S V6.4 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. P65-59S V6.4 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: P65-59S V6.4 B41117

Main Chip: TSUMV59XUS-Z1

Product: LCD/LED TV

LED Backlight: mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: 32-inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: MERGE.bin

Firmware Type: USB boot & Backup Dump

Service Code:

Source/Input 2580 Menu 1147

Note: The following firmware is a backup file and USB bootable. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

P65-59S V6.4 firmware for free download:

• P65-59S-V6.4 1366X768-NAGPAL-DUMP
• P65-59S-V6.4 1366X768-ONIDA-DUMP
• P65-59S-V6.4 1366X768-ONIDA-USB
• P65-59S-V6.4 1366X768-WESTON-DUMP
• P65-59S-V6.4 1920×1080-ONIDA-DUMP
• P65-59S-V6.4 1920×1080-ONIDA-USB
• P65-59S-V6.4 1920×1080-SONY-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

ST239-FP6 LED TV Board

ST239-FP6 is a simple ATV Driver Motherboard designed for LCD/LED TVs. It is designed to support Full HD LCD/LED Panel Screens. This board is suitable for the Asia Pacific and the Middle East markets. This is a three-in-one Combo Board. The main power module LED Backlight Inverter Circuit module and ATV Card are built into this motherboard. This board has all the features and connectivity ports as per the latest user requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. ST239-FP6 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: ST239-FP6

Main Chip: TSUMV59XU-Z1

Product: LCD/LED TV

LED Backlight: 85v 300mA

Flash IC: 4Mb

Sound Chip:

Tuner IC:

Screen supported: 32 inch

Resolution: Up to 1920×1080

Panel Voltage: 5V, 12V

Power Input: 220V AC

Firmware Name: NA

Firmware Type: Backup Dump

Service Code:

Source/Input 2580 Menu 1147

Note: The following firmware is a backup file. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First, check and verify the main board then install software. If you are new and do not have enough knowledge of loading/installing software/firmware or dump files, or facing any issues during firmware installation then visit and read here first.

ST239-FP6 firmware for free download:

• ST239.FP6 SG-3S3205D-INVERTED-DUMP
• ST239.FP6 SG-3S3205D-NORMAL-DUMP
• ST239.FP6 UNICOM 32D01-DUMP

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

JUC7.820.00018451 LCD TV Board

JUC7.820.00018451 is a simple ATV and DTV Driver Motherboard designed for LCD/LED TVs. This board is suitable for the Asia Pacific and the Middle East markets. It is designed to support Full HD LCD/LED Panel Screens. This is a Non-Combo Board. The main power module and LED Backlight Inverter Circuit module are required separately but ATV Card is built into this motherboard. This board has all the features and connectivity ports as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Scart. Its USB interface can be used for updating software/firmware and for playing multimedia files as well. It can also support Earphone output. JUC7.820.00018451 firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: Universal Board

Model: JUC7.820.00018451

Chassis: LS23

Main Chip: MST721DU-LF

Product: LCD TV

LED Backlight: mA

Flash IC: 25X40

Sound Chip: TDA1517P

Tuner IC: ATV

Screen supported: 19-29 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 12V DC

Service Code:

Source/Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

JUC7.820.00037562 firmware for free download:

• JUC7-820-00018451 CHANGHONG LT22610
• JUC7-820-00018451 CHANGHONG LT22620
• JUC7-820-00018451 CHANGHONG LT22629
• JUC7-820-00018451 CHANGHONG LT22710
• JUC7-820-00018451 CHANGHONG LT22810

For video tutorials, visit “Kazmi Elecom” my YouTube channel.