Tag Archives: kazmi elecom

6M48V6.0 HD LCD TV Board

6M48V6.0 is an HD LCD TV Board for Asia and the Middle East, supports HDMI, AV, PC-RGB, S-Video(Option), USB, YPbPr, TV signal input, Earphone, SPDIF, CVBS.

Basic Info:

Model No. 6M48V6.0

Main Chipset: MST6M48

Trademark: TOP-TECH

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel 6/8 bit LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes for Firmware Upgrade and Multimedia Playback Support also

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program to the U disk based on your screen size.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, and then connect the power supply again.

Factory Service Mode:

Menu+2580

Note: 

The following Software is a USB bootable file and can be loaded by USB disk. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

6M48V6.0 Firmware Free Download :

• 6M48 V6.0 1366×768 USB
• 6M48 V6.0 1440×900 USB
• 6M48 V6.0 1680×1050 USB
• 6M48 V6.0 1920×1080 USB

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TP.MSD309.BP75 LED TV Board

TP.MSD309.BP75 is a universal LCD/LED Board that has Full HD resolution Supported up to 1920×1080. TP-MSD309-BP75 is a combo board which means the main power supply, ATV board, and LED backlight driver board is a built-in single PCB. It has all the connectivity ports as per user requirements as HDMI, AV, RF, VGA, and SCART. The firmware files are given below for the technician’s support.

General Specifications:

Brand/Mark: China Universal

Model: TP.MSD309.BP775

Main Chip: MSD309

TV System: PAL\SECAM\NTSC PLAYBACK

Product: LED TV

Input Voltage: 220V AC

Backlight Volt:

MAX Backlight Watt: 65w

Backlight Current:

Resolution: up to 1920×1080

Flash size: 4 MB

AUDIO:

Tuner:

Service Menu:

Source

Note: 

The following Software is a backup dump and can be loaded by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

TP.MSD309.BP75 Firmware Free Download :

• TP-MSD309-BP75 BLAUPUNKT-32
• TP-MSD309-BP75 E-MOTION-32
• TP-MSD309-BP75 TECHNIKA-29

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

6M48V2.0 HD LCD TV Board

6M48V2.0 is an HD LCD TV Board for Asia and the Middle East, supports HDMI, AV, PC-RGB, S-Video(Option), USB, YPbPr, TV signal input, Earphone, SPDIF, CVBS.

Basic Info:

Model No. 6M48V2.0

Main Chipset: MST6M48

Trademark: TOP-TECH

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel 6/8 bit LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes for Firmware Upgrade and Multimedia Playback Support also

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program to the U disk based on your screen size.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, and then connect the power supply again.

Factory Service Mode:

Menu+2580

Note: 

The following Software is a USB bootable file and can be loaded by USB disk. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

6M48V2.0 Firmware Free Download :

• 6M48 V2.0 1024×600 USB
• 6M48 V2.0 1024×768 USB
• 6M48 V2.0 1280×800 USB
• 6M48 V2.0 1280×1024 USB
• 6M48 V2.0 1366×768 USB
• 6M48 V2.0 1400×1050 USB
• 6M48 V2.0 1920×1080 USB
• 6M48 V2.0 All-Resolution

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

AS-TSUMV59XU-LE1 LED TV Board

AS-TSUMV59XU-LE1 is a universal LCD LED TV Driver Board with a universal jumper setting. It is suitable for 18.5 to 24-inch screen panels.

Basic Info:

Model No. AS-TSUMV59XU-LE1

Main Chipset: TSUMV59XE-Z1

Display Format: up to 1080P

Aspect Ratio: 4:3, 16:9 & 16:10

Sound Chip: 1517

Tuner Chip:

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Note: The following firmware collection is a Backup Dump saved from working LED TVs that can be loaded by a programmer. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

AS-TSUMV59XU-LE1 Firmware Free Download Here :

• AS.TSUMV59XU.LE1 AKAI-LEA-22
• AS.TSUMV59XU.LE1 AKAI-LEA-24
• AS.TSUMV59XU.LE1 GENERAL-LE24
• AS.TSUMV59XU.LE1 LENTEL-39LTV
• AS.TSUMV59XU.LE1 POLAR-55LTV

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

6M48V3.0 HD LCD TV Board

6M48V3.0 is an HD LCD TV Board for Asia and the Middle East, supports HDMI, AV, PC-RGB, Scart(Option), USB, YPbPr, TV signal input, Earphone, SPDIF, CVBS.

Basic Info:

Model No. 6M48V3.0

Main Chipset: MST6M48

Trademark: TOP-TECH

Display Format: up to 1920×1080

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel 6/8 bit LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes for Firmware Upgrade and Multimedia Playback Support also

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

Step 1: Empty the U disk

Step 2: Copy the corresponding resolution program to the U disk based on your screen size.

Step 3: Connect the U disk with the Mainboard

Step 4: Connect the Keyboard and TV Mainboard

Step 5: Connect the power supply, and check the keyboard light. If there is a flashing light, that is in the written program, waiting for the light to turn to Green, work is done. If there is no flashing light, please cut off the power supply, then connect the USB once again, and then connect the power supply again.

Factory Service Mode:

Menu+2580

Note: 

The following Software is a USB bootable file and can be loaded by USB disk. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

6M48V3.0 Firmware Free Download :

• 6M48 V3.0 1024×600 USB
• 6M48 V3.0 1024×768 USB
• 6M48 V3.0 1280×800 USB
• 6M48 V3.0 1280×1024 USB
• 6M48 V3.0 1366×768 USB
• 6M48 V3.0 1440×900 USB
• 6M48 V3.0 1680×1050 USB
• 6M48 V3.0 1920×1080 USB
• 6M48 V3.0 All-Resolution

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MT8222.9A LED TV Board

T.MT8222.9A is a Universal LCD/LED Driver Board.

Basic Info:

Model No. T.MT8222.9A 10132

Main Chipset: MediaTek MT8222AHMU

Tuner: TDQ-ATF27WT-F

Display Format: up to 1080

Sound Chip:

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

MENU

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MT8222.9A Firmware Free Download :

• T-MT8222-9A 1366x768_AKAI
• T-MT8222-9A 1920x1080_OKEAH

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

TP.S512C.PB772 LED TV Board

TP.S512C.PB772 is a simple DVB + SAT Driver Board designed for LCD/LED TVs. This Board is suitable for the Asia Pacific and the Middle East markets. This Combo Board has the integration of the main power module, LED Backlight Inverter Circuit, and ATV Card in a single piece of a motherboard. This has all the features as per the latest requirements like HDMI input, USB interface, PC input, Component Input, TV, and Headphone jack. TP_S512C_PB772 is compatible with all panel screens of backlight current 350mA-600mA depending on hardware specifications. TP-S512C-PB772 firmware files are shared in this post below for the technician’s support.

General Specifications:

Brand/Mark: Universal HD Three-in-One Board

Model: TP.S512C.PB77 RD512K

Main Chip: RD512SP

Product: LED TV

LED Backlight Capacity: 300-350mA

LED Backlight: 72~79V

Flash IC: 8Mb

Screen supported: 40-50 inch

Resolution: Up to 1920×1080

Panel Voltage: 12V

Power Input: 220V AC

Tuner: DVB + SAT

Mirror Option: NA

Service Code:

Input

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

TP.S512C.PB772 firmware for free download:

• TP-S512C-PB772 TCL-40
• TP-S512C-PB772 TCL-43

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.MT8222.8A LCD/LED TV Board

T.MT8222.8A is a Universal LCD/LED Driver Board.

Basic Info:

Model No. T.MT8222.8A 9504

Main Chipset: MediaTek MT8222ARMU

Tuner: TDQ-6F6/T1260W

Display Format: up to 1080

Sound Chip:

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

MENU

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.MT8222.8A Firmware Free Download :

• T-MT8222-8A 9504 FUSION-26
• T-MT8222-8A 9504 SUPRA-26
• T-MT8222-8A 9504 SUPRA-32

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

T.VST26.12B LCD TV Board

T.VST26.12B is a Universal LCD/LED Driver Board.

Basic Info:

Model No. T.VST26.12B 11244

Main Chipset: TSUMV26KE-LF

Tuner: ET-6T1E-EF108WR3

Display Format: up to 1080

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out Jack

Audio O/P Power: 2 x 5 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

1. Copy the Required Firmware/software into the FAT32 USB Disk
2. Plug the U disk into the Mainboard USB port of the LCD/LED TV
3. Switch ON the power and Wait until even the IR indicator LED stops flashing
4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

MENU 1147

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

T.VST26.12B Firmware Free Download :

• T-VST26-12B 11244 DEX-19
• T-VST26-12B 11244 IZUMI-15

For video tutorials, visit “Kazmi Elecom” my YouTube channel.

MS0V590-ZC01-01 LED TV Board

MS0V590-ZC01-01 is an analog LCD/LED TV Control Board that is suitable for the Asia Pacific and the Middle East Market. It can support 24-inch to 42-Inches LED panels with a resolution is up to 1920×1080. Its USB interface supports Multimedia Playback and Software Upgrades as well. MS0V590_ZC01_01 has multiple HDMI ports that support 1.4 and its HDCP support 1.1. MS0V590.ZC01.01 is compatible with Non-HD and FHD LCD/LED panel screens. MS0V590-ZC01-01 is widescreen-supported and also has a multi-language option. MS0V590-ZC01-01 has the special feature of dual AV. MS0V591-ZC01-01 software collection is given below for free download.

General Specifications:

Board Make: China

Board Model: MS0V591-ZC01-01

Main Chipset: TSUMV59XUS-Z1

TV System: PAL/SECAM/NTSC

Panel Interface: Single-channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 8 Watt (8 ohms)

Panel Voltage: +5V/+12V DC (Default 12V)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: AC220 Volt

Maximum Current: 5000mA (Without Panel)

Standby Power: <0.5W

Maximum Current for USB: 500mA

Flash IC: 4MB

Tuner: R842/18675

Factory Code: Input/Source 2580

Firmware Type: Backup Dump

Note: 

The following given Software is a backup Dump and can be written by a programming tool. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. First Check the mainboard and then install the software. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

MS0V590-ZC01-01 Firmware Collection Free Download Here :

• MS0V590.ZC01.01 HAIER-40
• MS0V590.ZC01.01 HAIER-42
• MS0V590.ZC01.01 HAIER-43
• MS0V590.ZC01.01 ORIENT-40
• MS0V590.ZC01.01 ORIENT-43
• MS0V590.ZC01.01 ORIENT-50

For video tutorials, visit “Kazmi Elecom” my YouTube channel.