T.SK105A.03 Firmware Free Download

T.SK105A.03 Universal LED TV Board

T.SK105A.03 is a universal jumper option board for all universal LCD/LED TV panel screens.

Basic Info:

Model No. T.SK105A.03

Main Chipset: UTS6710-x

Display Format: up to 1920×1200 (FHD)

Supported Screens: up to 42″

Aspect Ratio: 4:3, 16:9 & 16:10

TV Format: Analog Signal

Support Language: Russian, English, Hindi, Simplified Chinese, Khmer, Vietnamese, Myanmar, French, German, Italian, Spanish

T.sk105A.03_Firmware

T-Sk105A-03-Software

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: LVDS Double 6/8

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Screen voltage: 3.3V / 5V / 12V (Jump cap)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 3-5 Amp

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Not only USB interface can be used to upgrade programs, but also can use to play video/music/photo, basically, formats are supported. You can also set a boot display pictures or LOGO and Mirror Enable.

How to Upgrade T.SK106A.03 Program:

  1. Copy the Required bin file in FAT32 USB Disk
  2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
  3. Switch ON the power and Wait even IR indicator led flashing stop (or flashing speedily)
  4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

Firmware Name: UTS6710_100.bin

Firmware Type: USB upgradeable

Remote Type: M90

Note: The following T.SK105A.03 firmware/software is USB upgradeable. Download the required resolution and then extract/unzip anyone of them you will get the folder. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download T.SK105A.03 Firmware files:

Download your required T.SK105A.03 resolution file and then extract them you will get the folder. Now copy the bin and text files to USB. for More Detail about the download process watch the video Click Here

T.SK105A.03 Firmware All resolutions Free Download:

Kazmi-Elecom

S.NO.BOARD/DESCRIPTIONDOWNLOAD LINK
1T.SK105A.03_800X600_Firmware_USBDownload
2T.SK105A.03_1024X600_Firmware_USBDownload
3T.SK105A.03_1024X768_Firmware_USBDownload
4T.SK105A.03_1280X768_Firmware_USBDownload
5T.SK105A.03_1280X800_Firmware_USBDownload
6T.SK105A.03_1280X1024_Firmware_USBDownload
7T.SK105A.03_1366X768_Firmware_USBDownload
8T.SK105A.03_1400X1050_Firmware_USBDownload
9T.SK105A.03_1440X900_Firmware_USBDownload
10T.SK105A.03_1600X900_Firmware_USBDownload
11T.SK105A.03_1600X1200_Firmware_USBDownload
12T.SK105A.03_1680X1050_Firmware_USBDownload
13T.SK105A.03_1920X1080_Firmware_USBDownload
14T.SK105A.03_1920X1200_Firmware_USBDownload

For video tutorials, visit “Kazmi Elecom” my youtube channel.

110 comments

  1. Avatar Of Sumit Somra

    Hi sir
    Can you help me please.
    I need datasheet of T.SK105A.03 board

  2. Avatar Of Fg

    After updating, my screen reproduces the image with grain and inverting the colors. Can you help me ? My screen is a LP156WH2 and is it possible to reflash old firmware?

  3. Avatar Of Rojul1705

    Hello! … I have bought the t-sk105a-03 board and it works fine, but I only play videos with audio in MP4 format, … in other video formats (MKV, AVI, etc) its playback is mute and the OSD message appears “AUDIO NOT COMPATIBLE”. I flashed with the proper firmware from this web page, but the silent playback of MKV and AVI videos still remains. What could be the cause? Thanks in advance

  4. Avatar Of Koops313

    Hello. I installed the 1920 x 1080 firmware for AUO B173HW01 v4. I changed LVDS map to JEIDA from NS setting.

    Why is the picture washed out, like very white, and resolution is very grainy

  5. Avatar Of Zandrie Pasia
    Zandrie Pasia

    Pls help me i want to change the backlight value but changing it does not change the brightness.

  6. Avatar Of J.g. Borg

    Hallo,
    ich möchte meinen Controller an ein anderes Display mit anderer Auflösung anschließen.
    Aber wenn ich die Firmware ändern möchte, zeigt er nur “Gleiche Version” an.
    Wie kann ich die Firmware überschreiben?

    Viele Grüße
    jgborg

    ——

    Hello,
    I would like to connect my controller to another display with a different resolution.
    But when I want to change the firmware, it just shows “Same version”.
    How can I overwrite the firmware?

    Best wishes
    jgborg

    • Avatar Of Kazmielecom

      simply load file by usb

      • Avatar Of J.g.borg

        Ha Ha, (Ironie off)

        “it just shows “Same Version”….

        So which file should I “simply load” ???
        “Same Version” is “Same Version”…

        No difference, USB-Update via standard menu or factory settings.

      • Avatar Of John

        I met the same problem. How to simply load file by usb ?

    • Avatar Of He

      Hi j.g. borg,

      first you need to flash the “SOS” version of actual the FW and in next step the FW for the new display.

      regards
      HE

      • Avatar Of Dino

        Hello,

        How to flash “SOS” firmware ? Where can download the “SOS” firmware ?

        please help,
        thanks A lot.
        Dino

  7. Avatar Of He

    first you need to flash the SOS version of the actual firmware.
    Power cycle
    and voila, you are able to flash the FW for the other display.

    regards
    HE :-

    Hi,

    Du musst zuerst die SOS Firmware flashen, dann rebooten. Jetzt kannst Du die gewünshte FW Version flashen

    Viel Erfolg.
    HE :-

  8. Avatar Of Ernani Cioffi
    Ernani Cioffi

    Hello. Few signal sources work at the AV input. There is no sign. What can it be? Thanks.

  9. Avatar Of Ernani Cioffi
    Ernani Cioffi

    Hi, I have a video with multiple subtitles. How do I select one of them? Tks.

  10. Avatar Of Jadon

    Hello i have a t.sk105a 03 but they didn’t send me a remote how can I get in to the service menu from the Little keyboard to adjust the mapping

  11. Avatar Of Huytran

    Hi, I have a T.SK105A.03 and install 1280×800 firmware to work with LCD Quanta QD14TL01. But windows 10 cannot show 1280×800 resolution. The best thing it can show is 1280×720 with two back border at top and bottom.

    • Avatar Of Emm73

      Hi, i had this with a screen of mine. Check on the GPU settings or Win10 Settings to try to force it to 16:10 resolutions. Apparently is needed to install external apps sometimes, try Custom Resolution Utility by ToastyX. In my case I had to play with the AMD Radeon Settings Lite to make my resolution 1728×1080

  12. Avatar Of Daniel Kolar

    Please is any suggest firmware for 1024×600 with 6bit color for B101AW02-V0 display? Thank you. I flash T.SK105A.03_1024X600_Firmware_USB.rar but still white screen on display. Thank you.

  13. Avatar Of Matt Gooderham
    matt gooderham

    wat the file name of sos reference

    • Avatar Of Kazmielecom

      universal

      • Avatar Of Dino

        file name of SOS reference (UTS6710_SOS.BIN) “CAN NOT WORK ”

        It seem only allow one time change the firmware. “The Same Version”

        Where have SOS file and How to flash the SOS file ??

        Please help.

  14. Avatar Of Todd

    Is it known what code is used on the remote? when programing a universal remote is there a brand that uses the same code map?

  15. Avatar Of Zellers

    Is there a way to rotate the picture to portrait mode / or is there a firmware for 1080×1920 ?

  16. Avatar Of Ly Tuong

    Hello Kazmielecom, I bought this board (T.SK105A.03) in the Shopee. I save the UTS6710.BIN and UTS6710_MD5.TXT to the FAT32 USB and put the USB to the board. But when I power on the board, the Red light on the key board is ON and the light in the USB is blinking 2 times then OFF, the panel is still off. I think the board cannot flashing the Firmware in the USB, I try to rename the file to UTS6710_SOS.BIN and do it again, but I see the same issue. After that, I try to use the key board to power on the screen, the screen is on, but the resolution is very low but I can control something with Menu key, I try to change language to English and go to menu Upgrade USB in the Setting. I press on it, and the screen show me “SAME VERSION”. Please help me …

    • Avatar Of Kazmielecom

      if you try to load the same resolution software then it may not boot. first, change resolution then load again required software. if display size is ok but picture is not good then chane Mapping setting from service menu.

      Sometimes USB disk not supported. So, try with other USB disk

  17. Avatar Of Ronald Bartiano
    Ronald Bartiano

    sir,please help,,i cant download the firmware,thank you

  18. Avatar Of Maciej

    Dzień dobry

    Mam T.SK105A.03 Po wgraniu rozdzielczości 1366X768 cały ekran świeci naprzemiennie R.G.B.
    Co może być przyczyną.

  19. Avatar Of

    I installed motherboard Tsk105a03 in lg 19inch panel (1280×2024)but picture is going out of panel boundaries from right side and bottom.please any solution?

  20. Avatar Of Ernani Cioffi

    Hello, I’m having problems with the universal board T.SK105A.03. Any firmware I try to install it ignores. If I enter menu 1147 and try to do a SW UPGRADE, it says that it is the “same version”, no matter what is recorded on the flash drive. What do I do? And please, complete responses

  21. Avatar Of Ernani Cioffi
    Ernani Cioffi

    How to change resolution without changing firmware?

  22. Avatar Of Ernani Cioffi

    But if you say that the installed version is final, so as not to try the upgrade, how am I going to change the resolution, if the USB update is the only way to do this and all I get is “the same version” ?

  23. Avatar Of Ricardo

    Good afternoon, I would like to know if there is a way to have files with lower video resolution, below 800×600, or generate files with lower resolution.

  24. Avatar Of Ernani Cioffi
    Ernani Cioffi

    T.SK105A.03 does not support firmware update

    https://youtube.com/shorts/hrHoV1I_JbI?feature=share

  25. Avatar Of Ernani Cioffi
    Ernani Cioffi

    The board had a problem. I was only able to update the firmware by removing the eprom and programming through the computer. By the method indicated, it doesn’t work. And this happened with 2 boards. This is serious.

  26. Avatar Of Erdem Tibas

    tsk 105 aldım ekranı 4ebölük gösteriyor 30 pin d0gru yanıtı larmısınsz rica etsem

  27. Avatar Of Erdem Tibas

    yazılım yükliyemedim usb tanımıyor yanlışmı yapıyorum acaba

  28. Avatar Of Erdem Tibas

    yazılımda olmuyor anlamadım yardım etigin in icin sagol

  29. Avatar Of Erdem Tibas

    başaramadım usb yazılımı tanımıyor

  30. Avatar Of Erdem Tibas

    cözüm bulamadım

  31. Avatar Of Erdem Tibas

    panel b154ew01 v9 cıhaz tsk105ao3 herşeyi calışıyor ekran dörde bölünmüş olarak cıkıyor yazılımda aynı verisyon diyor rica etsem cözümünü yazarmısınız saygılar

  32. Avatar Of Erdem Tibas

    herşeyden evel olur veya olmaz yardımların icin candan teşekür ederim sagol

  33. Avatar Of Erdem Tibas

    arkadaşım bu cıhazda 16.9 4.3 nasıl ayarlanıyor bulamadımda yazarsan memnun olurum

  34. Avatar Of Sujoy

    remote not working

  35. Avatar Of Efrata

    Hello sir, is there any Firmware update? I found new T.SK105A.03 Mainboard but in system info the SW name is UTS6710_03C_100.bin and your Firmware is not compatible with this Mainboard.

  36. Avatar Of Zescrom

    Hi. I bought a T.SK105A.03 board but it comes with wrong resolution.
    I hav tried to install UTS6710_100.bin from different resolutions, but it always says: “The same version”
    I hav also tried to rename UTS6710_100_SOS.bin, UTS6710_SOS.bin, UTS6710_SOS_100.bin, SOS.bin, but none of them works… What can I do? Thanks

    • Avatar Of Kazmielecom

      try some other resolution then your required one

      • Avatar Of Zescrom

        Thank you for your quick response.

        Well… I have tried all other resolutions, 800×600, 1024×768, 1280×800 and even 1920×1080 that is greater than the panel specifications, but always says “The same version”…. Any other advice?

        • Avatar Of Kazmielecom

          boot by USB. power off the tv then plugs in the USB then power on. it will auto boot

          • Avatar Of Zescrom

            Thank you for your response, but neither works 🙁

            The red light stays on and does not blink… I have tried other resolutions also.
            I think the only way is using an Eeprom programmer as was told in previous posts. ¯\_(ツ)_/¯

  37. Avatar Of Uwu

    Does anyone have T.SK105A.03 datasheet?

  38. Avatar Of Smokyyo

    for firmware not updating over usb—->

    Firmware has to be named:
    UTS6710_03C_100.bin
    UTS6710_03C_100_MD5.txt

    i also got a B version working, but i dont tryed with, B version already had right firmware.
    but if someone try:

    maybe has to be named:
    UTS6710_03B_100.bin
    UTS6710_03B_100_MD5.txt

    after sucess, go 1147 menu and change panel settings,
    so i got my Lcd working.

  39. Avatar Of Nunito Araos

    how i can exit on burn mode on this Controller board T.SK105a.03 please help me

  40. Avatar Of Santiago

    Hi, is there a way to activate “no signal power off” with this board? I have my PC connected through HDMI and when I turn the PC off the LCD shows the no signal message but it Will stay ON for ever.

  41. Avatar Of Konxoy

    Hello. I would like firmware for lvds t.sk105a.03 with samsung screen LTN156AT02. Thanks

  42. Avatar Of Jamshaid Khan
    jamshaid khan

    My china led led firmware is T.sk105a now i want to control LED with android mobile what brand is compatible with this firmware.

  43. Avatar Of Pj

    Hi,
    if anyone is reading this, provided 1920×1080 firmware DOES NOT work with AUO B173HW02, the picture is broken, it seems like these panels need a different firmware, the only one I found that works is:

    CPS198_21059313_FZSM_SK105A_03_A1_IR_XY_AP_M90_PNL_G173HW01_V0_1920_1080_4M_P_7KEY_REF100_de6434dd_20210611_234828.zip

    Hope that helps somebody!

  44. Avatar Of Saad

    usb detect nahi kar rahi may firmware change karna tha
    but usb ok hay usi lcd par ON kar k lagata hun to data show ho raha hay but firmware karte huwe detect nahi kar raha. plz help somebody my contact is (m.saadsaeed93@gmail.com) JAZALALLAH

  45. Avatar Of Ripto

    thanks sir

  46. Avatar Of Andrewmundle

    I dont know how to download firmware on t.sk105A.03

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

error: Content is protected !!