How to Reset Smart TV Free 7 Step Guide

How to Reset Smart LED TV

How to reset smart TV without remote while stuck on Logo. In this post, you will aware of when to reset the TV and how to reset it.

We have to perform a forced Factory data reset (Hard reset or Entering into Recovery Mode) in the situation that we cannot perform a normal factory data reset or When the software crashed or hangup or stuck on the boot screen. But keep in mind that The Forced Factory data reset will clear all of your customized settings including the parental lock setting and the following:

  • Google Account/Gmail Account/Play store Account
  • Application data and System data as well
  • Network settings & Wireless Key
  • User data like Channel data, all settings, etc

How To Reset Smart Tv

How To Reset Smart Tv

How to Reset China Smart LED TVs:

Here are below some different procedures that How to reset can be applied for different Chinese Smart TVs but always remember that the following methods will be applied only on those TVs which have the recovery option in the software:

Process 1:

  1. Press and hold the Power/standby and VOL- key from the TV then Power on the switch
  2. Keep pressing about 30 sec, Greenlight will be blink for several seconds
  3. LED TV reboots itself
  4. LED TV will be in Recovery Mode and will clear all user data and cache
  5. LED TV reboots itself and shows the initial setup screen
  6. Done. Now you can make setting and scan channel data

Process 2:

  1. Press and hold the Power/Standby and VOL+ key from the TV then Power on the switch
  2. Keep pressing about 30 sec, Greenlight will be blink for several seconds
  3. LED TV reboots itself
  4. LED TV will be in Recovery Mode and will clear all user data and cache
  5. LED TV reboots itself and shows the initial setup screen
  6. Done. Now you can make setting and scan channel data

Process 3:

  1. Press and Hold the VOL- and VOL+ key from the TV then Power on the switch
  2. Keep pressing for about 30 sec, Greenlight will be blink for several seconds
  3. LED TV reboots itself
  4. LED TV will in Recovery Mode and will clear all user data and cache
  5. LED TV reboots itself and shows the initial setup screen
  6. Done. Now you can make setting and scan channel data

Process 4:

  1. Press and hold the CH- and CH+ key from the TV then Power on the switch
  2. Keep pressing about 30 sec, Greenlight will be blink for several seconds
  3. LED TV reboots itself
  4. LED TV will be in Recovery Mode and will clear all user data and cache
  5. LED TV reboots itself and shows the initial setup screen
  6. Done. Now you can make setting and scan channel data

Process 5:

  1. Press and hold the Home and Menu key from Remote then Power on the switch
  2. Now TV will be on in recovery Mode. Select the option you want to wipe out data
  3. LED TV reboots itself
  4. LED TV will be in Recovery Mode and will clear all user data and cache
  5. LED TV reboots itself and shows the initial setup screen
  6. Done. Now you can make setting and scan channel data

Process 6:

  1. Press and hold the Confirm(OK) and Restore key from Remote then Power on the switch
  2. Now TV will be on in recovery Mode. Select the option you want to wipe out data
  3. LED TV reboots itself
  4. LED TV will be in Recovery Mode and will clear all user data and cache
  5. LED TV reboots itself and shows the initial setup screen
  6. Done. Now you can make setting and scan channel data

Process 7:

  1. Power on the switch and release standby by the power button on the keypad
  2. After Standby release, immediately press and hold Vol+ or VOL- key until the display the recovery screen
  3. Now select option Wipe Data/Factory Reset
  4. Note if Remote Control does not work then use External keyboard/Mouse
  5. LED TV reboots itself and shows the initial setup screen
  6. Done. Now you can make setting and scan channel data

How to reset video tutorial:

Video Tutorial for Mstar Chipset Smart LED TV Reset to Recovery Mode:

 

Mstar Recovery Software: Download

Mstar Recovery Software: Download

How to Reset by Hit & Trial:

If the keypad of the TV not working and you want to use the hit and trial method then open the TV and separate the mainboard of your TV and short the Keys with a tweezer or jumper wire one by one to Ground Key. I hope this hit and trial method will also be helpful for technicians or users to recover the TV. But keep in mind that the Screen is required to display while we apply recovery procedures, board reboots to recovery mode options where we have to clear the cache memory and reset to factory default to boot the TV into normal condition.

You should also know the other recovery methods if TV is not recovered by the given methods. Secure CRT application is also helpful for recovery of smart TV but you should know how to reset by secure crt command.

Finally, if the TV does not recover or does not enter into recovery mode then use the USB boot method with the appropriate firmware file. But often we do not have the matching firmware for the LED TV Brand to recover it and we load the board matching firmware in it that causes the change of the Logo and Remote control of the LED TV. If you are new and do not have enough knowledge of loading or installing software/firmware files then read here first.

Note: 

If you are not a technician or an electronic expert and do not have enough knowledge of how to reset or repair LED TVs then I suggest you do not open the TV if your TV does not recover by the 7 step methods and also not try to load any USB boot firmware without knowing mainboard specifications. It may harm your TV and Kazmi Elecom team is not responsible as a case of any damage or loss. A better way that I recommend for such users is to visit your nearest professional technicians or service center support to get it repaired.

How to Reset Samsung LED TVs:

 

256 comments

  1. Avatar Of Abdul Aziz

    AoA sir
    Meri LED orient hy 55″ ki iska model hy UHD 55M8010. Isko hard reset kesay krna hoga q k is k nichay just two buttons hain aik say power on ya off hota hy jb k doosray button press hota hy ya left right up down move hota hy remote pay b koi numbrs waghaira nahi hain kafi dfa try kiya boot menu main nahi ja ska or na iska software mil rha hy software k liyay b apko request ki hy or please is k boot.menu mn ja k hard rest ka treeqa b bta dain shukria.

  2. Avatar Of Mohammadullah
    Mohammadullah

    My smart cloud tv 55 inch faces burn mode every time after white green blue and black color it gets to black and some vertical lines appear in the left side and changes to middle of the screen in like burning after switching many buttons from the remote very hardly the picture displays.
    Please help

  3. Avatar Of Abid Ahsan

    sony bravia android 3d tv (model number kdl-55w900a) is stuck on boot/startup,
    neither the remote control nor the tv controls are working.
    how do i factory reset the tv?
    How do i install new firmware?
    i have also installed the firmware from sony but due to the format issue of the firmware the tv does not detect the usb.
    how to convert software installed in bin format to pkg format?

  4. Avatar Of Gurmeet Singh

    Hello sir i have tried every method mentioned in this forum to hard reset my Hv320.Pb801 board ..but not success.I have downloaded software for reinstallation from your web site but when i extract ,file is broken error shwo .i have tried withy many unzip format like you mentioned but not success.i m tired now.please suggest mein something so can i repair my tv.My remote control also stopped working suddenly.only power key working from tv side .. Suddenly happened this thing.i know my remote is ok and key hardware is also ok.i have tried to control my tv with eshare software.but my mistake i have change wifi mode to wirenet. After that my tv is a brick.
    My tv is 32 inch HV320.PB801 BOARD

    • Avatar Of Kazmielecom

      you must download all parts for unzip. if your tv is stuck on logo then software issue if on red light only then power board issue. if you don’t know much about these thing then better to visit the market for repairing

  5. Avatar Of Bobby Led Care
    Bobby led care

    Hello sir,aslam ailkum sir mere oass ek samsung 32d6000 set aya hai repair k liye.sir isey jb on karte hain tou display par kuch nahi ata sirf bcklyt on hokar of hoti rehti hai restart hota rrhta hai.pls help sirr how to repair it.

    • Avatar Of Kazmielecom

      may be kisi ne isme wrong software kar dia ho. agar board voltage sab ok hen to software karen

    • Avatar Of Salman

      How to reset micromax 42C0050UHD smart TV.
      I have selected “init” Option in service menu after that display not coming.

  6. Avatar Of Dinesh Kumar Panchal
    Dinesh Kumar Panchal

    Welcome

  7. Avatar Of Harimohan

    How to reset .vs.sp35851. 512/4gb board . Weston 40″led tv he sir

  8. Avatar Of Carlos

    E intentad todos los métodos en mi TV innova de 32 pulgadas con placa tp-mt5510i-pb801 y no se restablece, también descargue el firmware para el modelo de placa desde su página pero no detecta el USB, que procedería mi TV se enciende, pero no pasa del logo de la marca

  9. Avatar Of Yasmeri Castillo
    yasmeri castillo

    how to reset my wisdom share TV, right now I can’t see nothing it’s on black, please need your help

    #12687760165 what’ssap me

  10. Avatar Of Syed Rayhan Kamal
    Syed Rayhan Kamal

    Sir,
    My TCL SMART TV L40S4900 Size 40 inches and resolution full HD (1080p)
    I recently tried to update software/firmware from TV menu and that was the last day of TV working.
    Now when i switch on TV it displays standby light then i press power on from remote and TV displays logo screen for about 35 seconds and Tv goes back to standby.
    Plz advice what to do.

    • Avatar Of Kazmielecom

      load software

      • Avatar Of Syed Rayhan Kamal
        Syed Rayhan Kamal

        Okay i will load software from USB.
        But Please share the software or download link. I can’t find it.
        Software Version: V8-TMS08BB-LF1V023 TCL TV Model: L40S4900)

        Sir is it OK to load software of same 32 inch model TV (TCL L32S4900) on my 40 inch TV (TCL L40S4900) ? because it is available on your website.

        Thanks.

      • Avatar Of Adeeb Ur Rehman
        Adeeb Ur Rehman

        ecostar cx-40u857 software required.

  11. Avatar Of

    Besoin aide télé hivoix quand j allume .sa affiche hivoix.ya un touche l’ABA quand je appu sa écrans deviens Côme sourit d un ordinateur et âpre sa éteint.

  12. Avatar Of Ed

    I downloaded 1.5gb of files but the one I see being used is a tiny .bin file. What am I supposed to do with the .pkg file?

  13. Avatar Of Shahid Ghaffar
    Shahid Ghaffar

    Hi Kazmi Sahib,
    I have 32″ EcoStar Smart TV (Model: CX-32U851E) and it’s not working and software is struck in start.
    Can you please guide for the software ? I have searched your software list and not found that.
    How I can find the chipset number ?
    Best Regards,
    Shahid

    • Avatar Of Kazmielecom

      try to hard reset. open back cover and see the hardware version on the mainboard

      • Avatar Of Abbasfareed

        Sir mere pas 43inch ki android led ha model ha Tp.ms358.pb801 me ne us ka softwer chang kr diya ha ab use Ka Jo Main menu hai hai English mein hi Jab Ke baki sab Kuchh China mein hai hai aur uska remote bhi kaam nahi kar raha Meherbani mujhe apna WhatsApp number de Den yah mera WhatsApp number Save karle mai aap se uska software karana chahta hun Uske jitne bhi charges Honge main Ada karne ke liye taiyar hun agar aap bolenge to main aapki shop per a Jaunga

  14. Avatar Of Ahmad

    sir i tried with this recovery file. recovery menu comes but after that remote and panel buttons both not working. in that case how to choose WIPE menu? is there any way to make the keys working?

  15. Avatar Of Sharwan Kumar Sah
    Sharwan kumar sah

    Sir my nikai andriod led 32 inch , always gone standby mode how to recover pls help me

  16. Avatar Of Govind Sagar

    THANX SIR JI

  17. Avatar Of Balapradeep

    Brother!! Need some help Any idea about Blaupunkt BLA43BU680 recoverymod keys?
    Tried every combination didnt worked, Please help. Thanks

  18. Avatar Of Shekhar Gupta
    SHEKHAR GUPTA

    LLOYD L32S/S4Z1 MZ15AF42QE

  19. Avatar Of Rohan Patil

    sirji mera onida ka 43fis live genuis hai toh usme sidha mstar.bin wali file se karu ya nam kya badlna hoga

  20. Avatar Of Santosh

    and i already tried all the above option u have given so plz tell me how to hard reset micromax 42c0050uhd smart tv and also i downloaded pkg gile frm ur website but how to install via usb

  21. Avatar Of Yatharth

    Sir Sansui uhd 4k sme50qx0zsa 2015 ka mera tv hai to uski bin file ya fir uska firmware ki koi detail agar ap share kr skte hi to pleasebhot help milegi mai 3 din se is product ka name se stock firmware dekh rha tha pr abhi tk mila nahi .or local shop pe open krwaya to parts replace hone ka scene jyada hai …. to kaise pta karu ki konsi bin file kaam karegi or kaise bina khole iska default software load kr ke system up kar du… ap agar boot file share krskte hai to please share .

    • Avatar Of Kazmielecom

      not available

      • Avatar Of Yatharth

        Sir koii idea ki kisi similar file ka boot work krega ya nahi…
        Tv me sansui boot logo aa rha hai pr uske aagey ,load hone ke baad uska Home application is not loading ,Sirf backlit on hai full .. . android settings bhi open nahi ho rhi..
        to agar tv open kr ke uska ic read or write kr ke vapis chek kru to usse kuch fayda ho skta hai?
        Android setting clear hui honfi agar app ki to 17kb ki bin file se default aa skta hai kya?
        Ya fir bin file se read krau..

        • Avatar Of Kazmielecom

          android tv ka ic read and write nai hoga apse. isko jtag karna parta hy. isko hard reset karne ki try karen otherwise load software. better to visit some technician

  22. Avatar Of Jeeva

    sir mera android tv cv628h-b42 ka board hai is me softwere upload 37% ho kar dhobara softweer upload hotha hai bar-bar 37% hotha hai sir salotion dijiye

  23. Avatar Of Douglas

    Hola mi LedTV despues de aplicar el archivo de restauración, no ya no enciende nada, es decir enciende el led rojo. trato de encenderlo pero no funciona, he intentado cargar el archivo del firmware original pero ya no me deja cargarlo y antes si me dejaba, solo usaba el boton de power y vol- y se restablecia, pero hoy no hace nada. ayuda por favor

  24. Avatar Of Fotjon

    hi
    i have a VTEX android TV 40″
    do you have any bin file for this tv?

  25. Avatar Of Farhan Khan

    Aslam o alikum sir .mery pas 43 inch ki wisdome share ki TP.MS 358 PB 801 smart cloud led tv hy .plz mujhy batain kih es ka hard factory reset kesay lagay ga. Led chalty chalty off ho jati hy. Plz help me sir

    • Avatar Of Kazmielecom

      w.salam dear off ho jana means k hardware me issue hy. reset karne se theek nai hogi. Menu 1147 or 2580 try karen

  26. Avatar Of Alqi Macko

    hello. my board is cv358h-t42. Can use mstar for recovery mode? thnx Alqi.

  27. Avatar Of Ashfaq

    aslam-o-alikum broter i have download master recovery software but it is damaged. what i do plz guide me

    i have haier led tv model #LD42U7000 And Serial #DH1RN 0D000 1Q4E5 T0102 it is stuck on logo and working thanks

  28. Avatar Of Hanif

    for lloyd L32S model which one hard reset works

  29. Avatar Of Waqar

    salam sir KK.V35X.801A china smart tv 32” is ka software hai apke pass

  30. Avatar Of Kumail

    kk.v35x.801a software please

  31. Avatar Of Masoud

    Hi dear
    i do all things in that link but boatloader is not come

    when i press all that work just tv on and stand in
    “”wisdom.share”” and after sevral sec then rebot and…

    tv model is fack sony
    and main board model is Tp. ms338.pc821

    How can i up boatloader

  32. Avatar Of Alqi Macko

    My board is TP.MS5510S.PB803.Can i use Mstar for recovery mode.? I tried to reinstall sw but it don”t react. Thanks Alqi.

  33. Avatar Of Dr.nafees

    Aoa
    Brother how r u.plz i need the recovery file for tp.ms358.pb801 board.i shall b very thankful if u can send me the download link of specified file for this board.
    Regards

    • Avatar Of Kazmielecom

      w.salam dear just try with VOL+ key

      • Avatar Of Dr.nafees

        Can u plz elaborate the whole reset procedure to me because my led smart tv didnt boot and stuck at the startup wisdom share screen.thank you very much for quick and timely reply.

  34. Avatar Of Johny

    Olá bom dia, agradeço que me possam disponibilizar o Software para esta placa silver ip-le493413 firmware main cv338h-t50.
    Mto obrigado

  35. Avatar Of Bokang

    Hi, how do i fix my tv it is on wisdom share and the remote and button on the tv are not responding, my tv will show channels for one minute and go back to the wisdom share screen and once i switch it on everything does not work so to switch it off i have to unplug the tv. thanks

  36. Avatar Of Julio

    mstar recovery software link dont work

  37. Avatar Of Msalim

    hello sir i have gv553 pc821 star track 55 inch which is stuck in wisdom share i downloaded mstarugrade.bin , i tried all things you did in video from copy name , but usb is not loading when i turn on tv it shows logo and stuck in wisdom share again i tried it alot of time it didnt helped , i tried other methods holding keys it didnt help too what should i do ? i dont want to change frimware

  38. Avatar Of Sunny Doshi

    My Philips tv 49put7791/v7 4k smart tv is not update and not miracast allow how to update and miracast allowed

  39. Avatar Of Susanta Mohanty
    susanta mohanty

    looyd 32 inch bin file model l 32h210ms bord no-mt5510tpb752

  40. Avatar Of Mohamed

    Dear Team,

    kindly i need your halp to reset my TV board : T.MT5522.81

    thanks,

  41. Avatar Of Frank Kofi Agyekum

    please can u help me with sony kd-43x8305c or kd-49x8305c.BMFW EMMC FILES TO WRITE WITH RT809H

  42. Avatar Of Abdunabi Umarbaev
    Abdunabi Umarbaev

    P75-2831V6. o-a 43l usb hard reset

  43. Avatar Of Rahul P

    Hi, I couldn’t check my TV’s board number but it’s a Wisdom Share 43″ UHD. I tried changing the logo, following your YouTube tutorial, exported the file on usb and imported 1920×1080 298kb jpeg logo, turned the tv off, plugged out the power cable and then restarted after few seconds, but the tv showed a pink screen followed by pixelated screen and then everything went black, only the dish tv source works now, everything related to the TV’s interface is all black. Also, when I change the volume, even the dish tv’s screen goes black and just the volume circle shows the image of the picture being played. Any solution?

  44. Avatar Of Muhammad Usman
    muhammad usman

    salam…..ecostar led tv 39 inch hai….usmain wisdom share atm30.pb818 board laga hai….led on horhi hai…but na wifi chal rha hai…na wire network….na cable chal rhi hai….baqi media sahi chal rha hai…..software bhi load kia hai….par same issue araha hai…kindly guide krden

  45. Avatar Of Veerasamy

    dear sir, wisdom share tv stuck on logo, please help.
    main board : TP.MT5522.PC821

  46. Avatar Of Pritesh Pancholi
    Pritesh Pancholi

    Meri MITASHI Smart LED TV Model No. Mide032v02 HS
    mother board no. CV338H-A42
    Power button on karne par Mitashi ka logo aata he fir 2 minut bad autometic turn off ho jati iska kya upay he please confirm

  47. Avatar Of Chander Narula
    Chander Narula

    Hi,

    I need the Firmware for 43 inch smart led tv and motherboard model number is TP.SK518D.PB802.

    Can you please help me.

  48. Avatar Of Biplob

    आपको बड़े भाई को बधाई

    एक समस्या है

    कृपया समस्या को ठीक करें

    हम बांग्लादेश में रहते हैं

    हमारे देश में कुछ भी आसानी से उपलब्ध नहीं है

    अतः आपसे निवेदन है कि आप हमारे साथ सहयोग करें

    हमें लंबे समय से टीवी के साथ समस्या हो रही है

    स्मार्ट टीवी सॉफ्टवेयर देना चाहिए

    लेकिन सॉफ्टवेयर कहीं उपलब्ध नहीं है

    मुझे वह भी नहीं मिला, जो मैं आपके वेब पेज पर देख रहा था

    मैं आपको स्मार्ट टीवी का मॉडल नंबर और सॉफ्टवेयर नंबर दे रहा हूं

    कृपया, यदि आपने मुझे यह सॉफ़्टवेयर दिया होता तो मुझे बहुत लाभ होता

    V8-MT56EMA-LF1V0006

    TV MODEL: SLE48D2740TC

  49. Avatar Of Ramesh Bhoy

    Salam walikum sahab mai apne tv ke service menu me jaakar panel setting se lvds display ko off kar diya or ab display me blacklight aa rahi hai or sound aaraha hai koi tarika ho thik karne ka to batao n bahiya please
    tv details: 40inches , resolution 1920×1080, board model CV351H-A42, Smart TV, Brand Starshine please bhaiya koi tarika batao

    • Avatar Of Kazmielecom

      w.salam. agar ap k pas same tv available ho to ap us k steps follow kar k dobara se ON kar ksate ho. otherwise reload firmware

  50. Avatar Of Vishal

    Mitashi ka 4k mide040v03fs model hai aur wo logo pe ake restart ho jata hai usko hard reset kaise kar sakte hai …. Thanks in advanced

  51. Avatar Of Walter Camacho
    walter camacho

    good evening ! i have tv kanji 32m3 tp.mt5510ipb805 stuck in wisdom share i need update firmware. Thank you so much

  52. Avatar Of Sultan Ali Shah
    Sultan Ali Shah

    Sir mujhse galti se 32 inch tv kibfactory settings mn resolution chang hogai he, ab tv ka view nazar nhn ata kia karna chahie.

  53. Avatar Of Muhammad

    Hi,
    What should I do if I’ve pushed the reset button on the back of my Toshiba Led TV 39L4300VM. I plugged it in but it wont turn on there’s a red light circle but after I turn it on the red light circle is gone but the tv doesn’t show anything on the screen only black screen. Does that mean I have to flash a recovery firmware on the tv? Kindly ask for your help, thank you.

  54. Avatar Of Babi

    Hello.i have a tv 40 inch OBOD and stuck on logo android.main board TP.MT5510S.PB802 can you halp me please ,need a software for this tv?

  55. Avatar Of Rahul

    Hello sr Mera pass tp.ms338.pb818 Ka bord hai us main no power hai. and all village ohk soo ho rahe Hain
    So us main Kish chez ki problem hai

  56. Avatar Of Kamran

    Hey bro I have an issue with my ecostar 32u851 smart TV
    Its android version is 6 but I think its actually 4.
    I wanna allow draw over other app permission for an app but it is not allowing that is there something with that you can help me?

  57. Avatar Of Um Sultan

    Peace, mercy and blessings of God be upon you. Could you please help me? I have an Elekta 48smart tv and I don’t know how to find the models. Help me

  58. Avatar Of Um Sultan

    Hello, can you help me, my TV version is very old and I could not update it and it is locked from factory mode. I want to update my system because it is fixed on the old Android 4 and I want to update the TV, it is from Noah Elekta-48 smart eled and the model number and thank you very much

  59. Avatar Of Nazar

    Stuck on wisdom screen, any other option to restore
    Please reply your valuable information Sir

  60. Avatar Of Saul

    gracias me sirvio la solucion de reseteo del tv !

  61. Avatar Of Mounir

    please sir i need software tp.sk506s.pb802 for tv Silver 43″
    thanks

  62. Avatar Of Naga

    JVC LT49C5105C CV358H-A50 Struck Logo issue was resolved by (Process 3 mentioned in this site) pressing both Vol + and Vol – button in TV and powering on the TV by plugging the TV to power Source. TV entered into recovery process and when power on after recovery. TV does not struck in Logo screen instead in went to setup screen to set the TV as required and working properly. Thanks a lot for the help.

  63. Avatar Of Mohamad

    hi sir i have general box tv 65
    wisdom share
    does not boot from firmware
    gb61520190315094
    t.hv510.81
    what can i do can you help me

  64. Avatar Of Yusuf Khan Mohammed
    yusuf khan mohammed

    Assalam bhai, factory reset ke saare options try kia, lekin nahi huva. firmware download karne ke liye koi bhi link kaam nahi kar rahe hai. mera board tp.mt5510s.pb802. please madad kariye.

  65. Avatar Of Nizar Kareem

    I tried all steps, no one working, at last tried Mstar Chipset but not working, now light indicator red when my tv turned off or on, just screen color blinking, does anyway to fix that problem?

  66. Avatar Of Samine

    Possible way to access recovery mode for stream tv bm3981 motherboard CV9202H-BSM

  67. Avatar Of Samine

    Is it possible to get into recovery mode for tv stream bm3981 motherboard cv9202h-bfm

  68. Avatar Of Samine

    think you

  69. Avatar Of Amine

    thank you

  70. Avatar Of Amine

    Possible way to enter recovery mode for tv stream bm3981 motherboard CV9202H-BSM

  71. Avatar Of Mohd Aarif

    KAZMI BHAI ASSALAM WALEKUM
    BHAI EK TV REPAER KE LIYE AAYA HAI JISKO ON KARNE PAR WISDOM PAR RUKA RAHTA HAI PLESE HELP MY
    TP.MT5510I.PB801 KO HARD RESET KAISE KARE

  72. Avatar Of Sinniah Sathyaseelan
    sinniah sathyaseelan

    My TV model is 39L4300VM. Can I know how to access the service menu?

  73. Avatar Of Amine

    Possible way to enter recovery mode for tv stream bm3981 motherboard CV9202H-BSM

  74. Avatar Of Delannay

    Halo Pak
    Saya berharap saya memiliki sedikit lebih banyak informasi di situs Anda.
    Saya memiliki masalah dengan kartu tv utama: TP-SK708D-PC821
    Saya tidak dapat melihat saluran Prancis dengan tuner.
    Saya ingin menginstal ulang firmware atau menginstal pembaruan yang mungkin memperbaiki berbagai masalah yang saya alami
    Ketika saya memasukkan informasi saya untuk terhubung ke netflix atau video Amazon untuk melihat film dan serial yang saya inginkan.
    Saya dapat mengidentifikasi diri saya tetapi ketika saya datang untuk menonton film atau serial saya selalu memiliki pesan kesalahan bahkan ketika saya mengunduh aplikasi lain dari Play store setelah mengunduh dan menginstal saya selalu memiliki masalah yang sama itu tidak memungkinkan saya untuk melihat saya film atau serial.
    Saya ingin tahu perangkat lunak apa yang harus diunduh dan / atau diunduh untuk Prancis dengan antarmuka dalam bahasa Prancis
    Bisakah Anda memberi tahu saya apakah kartu ini dilengkapi untuk fungsi trek untuk Alexa dan Google
    Anda dapat menghubungi saya melalui email: jydelannay@free.fr atau di WhatsApp: +33617910498

  75. Avatar Of Zayad

    Assalam o alikum
    Bai mera pas nikai ntv5000csled smart tv hai ya interface par stuck ho gya hai (is ka wallpaper stuck ho gya hai) tu plz batain is ka software ka koi masla hai yar pir emmc ka?

    • Avatar Of Kazmielecom

      w.salam dear isme konsa board install hy woh check kar k search karen per pehly hard reset ki try karen

  76. Avatar Of Sunilt

    Hello,
    My Uptron LED TV is showing error
    ”Android Recovery
    Mstar/cvte_msd338_512m/cvte_msd388_512m
    4.4.4/84db6d7a_20180926_155921/1.0.0
    user/test-keys
    Any button cycles highlight.
    Long-press activities
    Can’t load android system. Your data may be corrupt.
    If you continue to get this message, you may need to
    perform a factory data reset and erase all user data
    sored on this device.
    Try again
    Factory Data reset”

    TV remote and TV buttons are not working, how to do factory data reset.

    as per attached link, have downloaded / copied the file in USB and tried many times but still showing same error no further process.

    TV Model – L3201S

  77. Avatar Of Ajab Khan

    Sir mere pas dp 358.813 g1 pg 512 4g ke led power on Karo to kuchh dair Android pe rehti hy phir off ho jati hy phir on karo to be aisa he hota hy recovery pe b ni ja rahe usb se b boot ni kar rahe bin file daal k dekh le hy mstar upgrade wali pe boot ni kar rahe na apne software pe…koe hal batta dain shukriya

  78. Avatar Of Shakeel Imran
    Shakeel imran

    Sir me using echostar led tv model CX-32U851E
    SIR I have problems in my android tv it’s wifi connect and disconnect automatically.
    How to resolve my tv wifi problems

  79. Avatar Of Worried

    I rebooted into bootloader now it won’t boot anymore, only blank screen. Help please.

  80. Avatar Of Alim Shaikh

    ASSALAMUALAIKUM
    MERI TV EAIRTEC KI HAI 50 INCH USME WISDOM SHARE SMRAT CLOUD TV KA ANDROID VERSION HAI ISKO RESET KAISE KRNA PADENGA BUTTONS SE PLZ GIVE ME INFO BHAI

  81. Avatar Of Yarden

    I have Masimo smart TV and it’s doing the wisdom share smart cloud TV and its stuk.
    I do what you explain in the vido and its not work
    I like if you help me to solve this issue

  82. Avatar Of Upithope

    For RT2841.pb771 file rename to install.img or upgrade.img?

  83. Avatar Of Arif Khan

    Salam bhai,

    Mera 32″ Samsung wisdom share tv main Netflix aur youtube pehlay chalta tha ab nahi chal raha.

    Message ata ha not compatible.

    How to resolve please

  84. Avatar Of Shakeel Imran
    Shakeel imran

    Assalam o alaikum
    Sir we have echostar led 32″
    We have problems that it can’t connect to wifi
    Or sometime it connect and disconnect
    Please help me to resolve the issue
    Thanks

  85. Avatar Of Shakeel Imran
    Shakeel imran

    Factory default mean restore factory?

  86. Avatar Of Afzal

    sir ye 32 in ki LED

    cvte_msd338_512m service code
    sari list check ki lekin koch samaj nhi a raha plz help ho kre nhai

  87. Avatar Of Irfan

    Dreamstar android tv 55DS1 android logo there is a problem, what is the solution for it

  88. Avatar Of Irfan

    I don’t know how to enter the reset menu and I couldn’t find suitable software for it. where can I find it, thanks

  89. Avatar Of Rohit Yogeshbhai
    Rohit Yogeshbhai

    Respected Sir,

    Marq… by Flipkart company 49SAUHD model TV has stuck logo issue and black screen.
    Motherboard details of this TV….1870142M-00552 and
    There is a sticker on the motherboard that has 1870142M-00365.
    If you have any solution or recovery boot file, please send.

  90. Avatar Of Ali Raza

    Aoa Kazmi sb Mery pas ecostar u-32U860 led ha wo WiFi se connect ho jati ha lakin YouTube pe unable to load page ka error aa raha ha. Chahiye jitni dafa factory reset kr lo issue solve ni hora. Kindly rehnumai kren hard reset kesy krn

  91. Avatar Of Mamdooh

    i ned software for wansa tv modil no – WUD55D8856S

  92. Avatar Of Haseeb

    AoA Kazim bhai i am very happy mera ELEKTA 40inch ka same prblm tha websearch pe stuck hojata tha. tb.ms338.pb801 apki website se software dwnld kia master reset ka aur masterreset / allupgrade wali video follow ki Alhumdulillah sahi hogya 🙂 JazakAllah.
    ab sirf ek prblm baki hai k jo applications thi ya jo phele interface tha smart tv ka wo kese install hoga. settings mai wifi ki option nahi mil rahi.

    • Avatar Of Kazmielecom

      w.salam dear. acha ho gya. iska genuine software he reset hua hy to setting same honi chahye. application add karen dobara aur network me wifi check karen

  93. Avatar Of Muhammad Asad

    Assalamualaikum kamzi bhi …… Bhi Changhong ruba ka led tv ha modle number : LED32E5800i ha or Module number : TP.MS338.PB802 Iska Software ka issue a rha kindly wo provide krde ager apky pas ha tuu

  94. Avatar Of Hassan

    AOA Kazmi Bhai, mere tv Haier model le40b8000 40” LED firmware ke baad screen nhi on horaha aur sirf static ki awaz a rahi hai

  95. Avatar Of Hacil Abdelkrim

    I need software tv enie modele EDLES55M02A17C THANKS

  96. Avatar Of Hacil Abdelkrim

    I Need software tv ENIE MODELE EDLE55M02A17C PRBLEM REBOOT THANKS
    MAIN BOARD TP.MS338.PC821

  97. Avatar Of James

    Hi sir m tv is von boad is tp.mt5510i.pb805 i have tied all methods even mstar receovery and it did not work the software i found from your website was the same board but tv is AKAI .. the tv has onnly 1 button for power only i have tid all methods describe here using the emote but it is still stuck on wisdom share or severals weeks
    please help me

  98. Avatar Of Heinrich

    Please help i have 65 inch tv i loaded wrong firmware noe it is just dead main board is t.hv553.81 please help

  99. Avatar Of Jamshad

    hello sir,

    first of all thank you for all the great work your doing, i have 55Q7G from hisense main board RSAG7.820.9615, it is struck on boot loop. i tired all the option you mentioned above with no luck. company send me a firmware update but it is .bin format and my tv is not recognizing it. after some research online i find that it only recoginze .pkg format. how can i solve this, please help.

    Thank you

  100. Avatar Of Mohammed

    thank for your help and knowledge, my board is cv358h-t42 board with resolution of1366*768 by the name for the TV is VYOM 32 INCH ,can I use cv358h-t42 / 1366*768 of any R.GARAXY or KROHLER or LAXAS please guide me, and should we download one part or supposse to be oll parts.it has only power switch, log stuck problem, PLEASE

  101. Avatar Of Heinrich

    My uart reads this on th t.hv553.81 board after i flashed wrong firmware how can i fix this

    Bootrom start
    Boot Media eMMC
    Boot head format invalid

  102. Avatar Of Heinrich

    Thanks for all the support i need some more help i got a usb uart conector an plugged it to th t.hv553.81 board but it reads boot header invalid and it wont boot from usb to load right firmware
    Kind regards heinrich

  103. Avatar Of Heinrich

    Good day thanks for the help so far so i did conect to the gkc terminal but can get the tv to respond to any comands with the uart what comands can i try to get it to read usb again

  104. Avatar Of Heinrich

    Ok so i got a secondhand t.ms638.751 main board to replace the t.hv533.81 and it worked plug and play but now it had i think andriof 7 on it and i did a factory reset to setup as new but now it is on andriod 4.4 again and the apps wont update dew to the andriod version how woul i get it to upgrade if it says already on lates version

  105. Avatar Of Sandip Singh

    Pls share me recovery file of TP.MT5510I.PB801
    its stuck on Android on startup

  106. Avatar Of Sandip Singh

    Videocon android TV stuck on startup need suport for TP.MT5510I.PB801 firmware and guide me how to amend this. please do the needfull.

  107. Avatar Of Mama

    good day sir i have TP.MT5522.PC821, but the pkg firmwares never install like the bin files, maybe there is another way that i dont know about, i read all the comments here but cant still find a soluton use th usb method but it never work, please help, and thanks for the help you glways ive us

  108. Avatar Of Sk

    SALAM ALIKUM KAZIM BHAI IHAVE CLASS PRO TV 55 INCH
    MODEL:CKN-55UD

    KINDLY HELP ITS ON BOOTLOOP THE SAME ISSUE HAPPEND WITH ME THE ONE U SHARED IN U R RECOVERY VIDEO IDONT USE TV SOFTWARE AT ALL I JUST USE HDMI PORTS FOR GAMING STUFF AND MI DEVICE
    I JUST WANT TO USE HDMI PLEASE HELP ME TO RECOVER TV SOFTWARE IT JUST BOOTLOOP
    OR CAN I RECOVER IT MSTARUPGRADE
    JAZAKALLAH

  109. Avatar Of

    Sir my tp.mp5510s.pb782 has power up down left right key as control how can I perform hard reset on my board

  110. Avatar Of Gouravchourasiya
    Gouravchourasiya

    Bhai meri hitech global n.m358.803 model h logo stuck h recovery pe v nhi jari h na firmware upgrade hori h please bin file ka name batado aur ho ske to recovery file bhi send krdo link atleast bin file ka name batado

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

error: Content is protected !!