T.V53.03 SOFTWARE FREE DOWNLOAD

T.V53.03 Universal LCD/LED TV Controller Board

T.V53.03 is a universal LCD LED TV Controller Driver board with a Jumper Cap setting.

Basic Info:

Model No. T.V53.03

Main Chipset: TSUMV53RUU-Z1

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

TV Format: Analog Signal

Support Language: Russian, English, Hindi, Simplified Chinese, Khmer, Vietnamese, Myanmar, French, German, Italian, Spanish.

T.v53.03_Firmware

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: LVDS Double 6

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Screen voltage: 3.3V / 5V / 12V (Jump cap)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

T.v53.03_Software

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 3-5 Amp

Standby Power: <0.2W (for the motherboard only)

Maximum Current for USB: 500mA

Firmware Name: VST53C_4MB_M.bin

Firmware Type: USB upgradeable

Not only USB interface can be used to upgrade programs, but also can use to play video/music/photo, basically, formats are supported. You can also set a boot display pictures or LOGO and Mirror Enable.

How to Upgrade Firmware:

  1. Copy the Required Firmware/software in FAT32 USB Disk
  2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
  3. Switch ON the power and Wait even IR indicator led flashing stop (or flashing speedily)
  4. Done. Unplug the U-disk (It will take max 1 min to upgrade firmware)

Factory Service Mode:

Menu+1147

 

Note: The following given firmware/software is USB upgradeable. Download all parts of the required resolution and then extract/unzip anyone of them you will get the folder. Kazmi Elecom Team is not responsible for any type of damage/loss as a result of uploading/downloading the firmware. If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download all parts of your required resolution and then extract any one of them you will get the folder. Now copy the files to USB. for More Detail about download process watch video Click Here

T.V53.03 Firmware All resolutions Free Download Here :

Kazmi-Elecom

S.NO.BOARD/DESCRIPTIONDOWNLOAD LINK
1T.V53.03_All_Firmware_USBDownload
2T.V53.03 800x600-USBDownload
3T.V53.03 1024x600-USBDownload
4T.V53.03 1024x768-USBDownload
5T.V53.03 1280x720-USBDownload
6T.V53.03 1280x768-USBDownload
7T.V53.03 1280x800-USB
8T.V53.03 1280x854-USBDownload
9T.V53.03 1280x1024-USBDownload
10T.V53.03 1366x768-USBDownload
11T.V53.03 1400x900-USBDownload
12T.V53.03 1400x1050-USBDownload
13T.V53.03 1440x900-USBDownload
14T.V53.03 1600x900-USBDownload
15T.V53.03 1600x1200-USBDownload
16T.V53.03 1680x945-USBDownload
17T.V53.03 1680x1050-USBDownload
18T.V53.03 1920x1080-USBDownload
19T.V53.03 1920x1200-USBDownload

52 comments

  1. Avatar Of Manzoor

    Asslamualekum

    Sir
    3days ago. T.V53.03 Board ke software ki all files blank Hain. Please check
    Thanks

  2. Avatar Of Kris

    Hi which firmware should I use for nt156fhm for full HD on board TV 53.03

  3. Avatar Of Ruben

    sir i already downloaded the file but cannot extract/unzip..its corrupt or damage, i downloaded all the files but still i cant extract the files..the donwloading files is completed..pls sir need help

  4. Avatar Of Thanh

    I use B089AW01 panel.
    Which firmware I can use?

  5. Avatar Of Ersin

    Hello From Turkey, Kazmielecom Friends,

    i have LTN156AT02-D09 LED 15.6″ panel, i buy t.v.53.03 from chinei and i change it jump 3v. and i take power, after that have my screen light but havent any display, and i want to change fireware, and download your rar files, i try it with 1366×768 pixel. but didnot work any fireware,

    what you think ?

    • Avatar Of Kazmielecom

      Dear resolution is ok and firmware is also ok if board is on. check your lvds connection for display issue

  6. Avatar Of Mustafa

    Assalamualaikum
    Sir I want t.v56.03 1440×900 resolution firmware

  7. Avatar Of Porthos Aguilar
    Porthos Aguilar

    Sir, I can not download the T. V53.03 firmware,can u help me? Thanks

  8. Avatar Of George

    Hello.my card no is t.v53.03 is it possible to flash it with a v56 firmware…

  9. Avatar Of Chandra

    software show required passward

  10. Avatar Of Cepi

    Permisi tuan saya memiliki papan t.v53.03.ketika ingin mengupgrade mengapa indikator pada modul tidak menunjukan proses flash.langkah apa yang harus saya lakukan

  11. Avatar Of Kad

    T.V53.03C v1

  12. Avatar Of Armando

    Hello, what if it is not flashing while doing firmware upgrade? Red light only?

  13. Avatar Of Thoi

    Tôi đã mua bo T. V53. 03 nó bị lỗi chíp nhớ 25q32 vậy tôi phải làm gì để nạp lại firmware vào chíp nhớ mới

  14. Avatar Of

    plz can u share pcb schematic of t.v53.03

  15. Avatar Of

    Kazmi share LVDS schematic please

  16. Avatar Of Fatih

    Assalemualaikum,

    I have the panel LP173WD1 (TL)(A4). I have installed the firmware on my device. But I can´t connect my laptop via HDMI with panel.
    Can you help me?

  17. Avatar Of Soon

    Dear sir I have a single channel 8 bits 1366X768 panel. Where can I download this firmware for this panel? All the firmware in your download section doesn’t seem to fit my screen resolution

    Thank you

    • Avatar Of Kazmielecom

      mostly software designed for a general panel. you should load according to panel resolution

      • Avatar Of Soon

        Yes I have tried, but I think they are double channel 8 bits not single channel. That’s why the display is blank after flashing the firmware.

  18. Avatar Of Erwinsky

    Hi,
    Does the jumper still need to be set even if it is being directly connected to the
    board from a VGA or HDMI ports of a monitor?
    Tried directly but there’s no display.
    Am I missing something?
    Thanks
    -E

  19. Avatar Of Sabri

    merhaba
    panel HM185WX3-2OO 1366X768 açılıyor test görüntü var 1366×768 başka frimvare varmı?

  20. Avatar Of Tran Trung Tin
    Tran Trung Tin

    The image is inverted, how do I correct it?

  21. Avatar Of Dayamoy Mondal
    Dayamoy Mondal

    T.V53.753A

  22. Avatar Of Electo

    Blank software problem . Plz help

  23. Avatar Of

    Asslamu alekum
    Sir. T.V53.0C card ka software chahiye in multi resulation. with china (ENTER) Remote…

  24. Avatar Of

    I can’t see the resulotion

  25. Avatar Of Marcelo Catindig
    Marcelo Catindig

    Compatible with a 1024×600?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

error: Content is protected !!