ECHOLINK 9000 Xtreme Satellite Receiver
ECHOLINK 9000 Xtreme dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of ECHOLINK 9000 Xtreme receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot. If the Flash IC/Memory IC of the ECHOLINK 9000 Xtreme receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver ECHOLINK 9000 Xtreme does not turn on. In this situation, we need to reprogram the flash ic of the ECHOLINK 9000 Xtreme receiver with the matched hardware dump/flash file to get the receiver in normal condition. A dump file of ECHOLINK 9000 Xtreme is shared for the technician/user support.
Information and Specifications of ECHOLINK 9000 Xtreme:
Manufacturer: ECHOLINK
Box Model: 9000 Xtreme
Main Board: NA
Main Controller or Chipset:
Box Type: Digital
Flash Type: SPI SOP8/SOIC8
Flash Memory: GD25Q32B
Flash Size: 4 Mb
Software Type: Backup Dump
Software Size: 3.33 Mb
Download File Format: ZIP
Download Type: Free
Note:
Given ECHOLINK 9000 Xtremereceiver software is a backup dump file and can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. KazmiElecom Team is not responsible for any type of damage/loss because of uploading/downloading the software.
Here is the download link of the ECHOLINK 9000 Xtreme dump file free download.
