Xcruiser 4K Receivers Recovery Files Free Download

Xcruiser XDSR 4K HDR Receivers Recovery Files and Procedure

Xdsr515Hdr

Xdsr585Hdr

Xdsr685Hdr

How to Recover:

Mostly Android Receivers hang up while in running applications or hang on Boot Screen during the Booting process when you start the receiver. So, in this condition, the recovery process is applied to get the receiver in normal condition.

There are two different processes for Xcruiser 4K receivers that are given below:

  1. This process will work for that receiver in which Software version 1.6.0 or later is installed. Now Unplug the switch of a receiver and while again connecting the switch press red key from remote 15 times. while LED is on the receiver will blink red and green like flashing mode then press 1 number key from the remote. this process will make the receiver to reboot in factory default mode.
  2. Recovery files are given below. Copy the first method recovery file in the USB disk. power off the receiver. plug in the USB disk into the receiver. While again connecting the switch press the CH Up key from remote 20 times, the receiver will start with installing software from USB disk and through this process, the receiver will be erased completely and boot with factory default setting. If this process does not work then copy the 2nd method file into USB disk and again repeat the said process.

Here are recovery files for the below Xcruiser 4k models for free download:

Xcruiser XDSR585HDR

Xcruiser XDSR685HDR-AVANT

Xcruiser XDSR515HDR

 

S.NOFILE NAME/DESCRIPTIONDOWNLOAD LINK
1Recovery File Xcruiser XDSR585HDRDownload
2Recovery File Xcruiser XDSR685HDRDownload
3Recovery File Xcruiser XDSR515HDRDownload

35 comments

  1. Avatar Of Amritpal

    Good Job,all my hunts & searches end here,Thanks a lot, Hats off to u…
    Subscribed u r youtube channel also for future updates…

  2. Avatar Of Atul

    My xcruiser 515 4 k is dead mode.no any light blinking how to resolve.ply reply.Thanks

  3. Avatar Of Mubeen

    hello sir…my new mediastar z1 has been on boot and intiallizing mode and then restart…how can i slove it.

  4. Avatar Of Irfan

    Hi bro I have a receiver named HQ sat v1-2013 just like cruiser 4k same back side and also same board I have seen in your YouTube videos but there is problem of signals…channels not search…one time chanells searched but after that not searching pls tell me solution…plz send me what’s app number I will send you pics of receiver

  5. Avatar Of Rahul

    Sir send openbox AS4K CI pro recovery file sw

  6. Avatar Of Lakmal

    xcruiser 585 not bootable try with usb recovery, but no luck. its come logo circle then restart
    try with remote recovery press by red button firmware not process.
    there any offline firmware or upgrade by pc?

  7. Avatar Of Mohamadreza

    HI
    MY XCRUISER 715 NOT BOOT PLEASE HELP ME
    THANK YOU

  8. Avatar Of Lakmal

    xcruiser 585 & 685 boot issue, booting and restart when popup xcruiser logo.
    try to recover with usb it doesn’t support with new firmwae version 1.7.0
    kindly request for any solution.

    thx

  9. Avatar Of Mohammadreza

    hi
    can you send me recovery file or flash file xcruiser715?

  10. Avatar Of Pruthuvi

    Hello Dear Sir,

    Could you please explain how to add an epg url to the Xcruiser inbuilt IPTV player?

    It worked properly with other iptv android apk EX: Tivimate, MYTVOnline.

    EPG Only works with satellite channels; I tried a variety of methods to obtain epg.

    edit m3u play list EX: #EXTINF:-1 tvg-ID=”SRF1.ch” tvg-name=”SRF 1 HD” tvg-logo

    Please, waiting for a quick respond.

    Thanks,

  11. Avatar Of Mgonza Salehe

    685hdr not receiving signal plz can you help to solves the issue ?

  12. Avatar Of Mohammad

    Hello, I have a 585 X Cruiser receiver. There is a boot loop problem. I could not recover with usb with all three available methods. I think the only remaining way is the emmc program. If you know the isp pins, let me know so that I can copy and burn it from a healthy device. Thankful

  13. Avatar Of Reza Mozoun

    I have xcruiser 585 , i have no out put in HDMI but TV out is working.In advance option andriod setting Mode of STD , HLG10 AND AUTO NOT WORKING.
    Actually i have no out put in HDMI and i did reset factory and but my problem not solving.

  14. Avatar Of Tahir

    sir xcruiser 685 hd ko downgrade kaisay karain c line nahi chalti upgrade firmware may

  15. Avatar Of Omid

    Hi
    my 585 was reboot when “st1” state shows on panel continuously after doing your instructions.
    how can i solve this ??(I try many diffrent version of f.w’s but does not work)

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

error: Content is protected !!