Home / Universal Brands / T.V56.03 SOFTWARE FREE DOWNLOAD ALL RESOLUTION

T.V56.03 SOFTWARE FREE DOWNLOAD ALL RESOLUTION

Universal LCD/LED Controller Board

Basic Info:

Model No. T.V56.03

Main Chipset: TSUMV56RUU-Z1

Trademark:

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohm)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

  1. Copy the Required Firmware/software in FAT32 USB Disk
  2. Plug in the U disk into the Mainboard USB port of LCD/LED TV
  3. Switch ON the power and Wait even IR indicator led flashing in speed
  4. Done. Unplug the Udisk (It will take max 1 min to upgrade firmware)
  5. It continues to flash and never stop. This is normal, just wait about 1 minute, this means that the update is complete. Then turn off and turn off the u-disk

Factory Service Mode:

Menu+1147

T.V56.03 Firmware All resolutions Free Download Here :

 

S.NO.RESOLUTIOND.LINK.1D.LINK.2
1T.V56.03_1024X768DownloadDownload
2T.V56.03_1280x1024DownloadDownload
3T.V56.03_1366X768DownloadDownload
4T.V56.03_1440X900DownloadDownload
5T.V56.03_1600X900DownloadDownload
6T.V56.03_1680X1050DownloadDownload
7T.V56.03_1920X1080DownloadDownload
8T.V56.03_1920X1200DownloadDownload
9T.V56.03_1280x800DownloadDownload
10T.V56.03_1366X768_SonyDownloadDownload
11T.V56.03_1920X1080_SonyDownloadDownload
12T.V56.03_1366X768_LGDownloadDownload
13T.V56.03_1920X1080_LGDownloadDownload
14T.V56.03_1366X768_SamsungDownloadDownload
15T.V56.03_1920X1080_SamsungDownloadDownload

About kazmielecom

Check Also

T.MSD309.B81B Software Free Download

T.MSD309.B81B LED TV Board T.MSD309.B81B is a simple ATV Driver Motherboard designed for LCD/LED TVs. …

56 comments

  1. plz send softwair 56.30univarsal

  2. Sir I want led lcd tv software please give me

  3. I WANT T .V56.03 UNIVERSAL BOARD BIOS FIRMEWARE . WHARE IS AVALABLE. PLZ GAID ME

  4. Need firmware for 1024×600

  5. hello.
    i need dump rom for this board because my eeprom chip was replaced.
    can you share..
    many tanks.

  6. Plz. 56j11.2 software to resolution

  7. firmware T.V56.03 1366×768 samsung and also in general is not working.. pls.. help me! what swill i do and if need to pay for the firmware to work, how much the cost of this? i hope is not so expensive.

  8. I need software tv56.03 1680-1050.. using sony remote.. Pls help me.

  9. Sir T.V56.03 Firmware software1920×1080 resolution please give me

  10. Sir 56.03 all resolution software please sent me

  11. Sir my board is T.V56.031 IT THE TO the t.v.03?

  12. Dear, good afternoon, I have, the controller card T.V56.03, an LDC of a TV LG 37LK450-SG.AWHYLUR, its screen is LCD is “LC370WUE-SCA1”, 1920×1080, 12 Vdc, I connect everything but I do not load the firmware neither general nor the others. Consult, I need an investment card to work or only with the T.V56.03 direct vast and superfluous, thanks, I remain attentive to your comments, I hope you can help me.

  13. harishankar sharma

    Sir T.V 56.03 univarsl bod to 12801224 Resolution Software please sent me

  14. Francis Oscar Klipp

    1366×768 lg takes me to 1920×1080

  15. cam you direct me to a video because i cant seem to get mine to work

  16. can you tell me where to get on i had to return mine because it was broken and i dont trust the seller

  17. i bought the T.V56.03 CONTROLLER BOARD (TSUMV56RUU-Z1 / A7MPP46A / 1829A)
    for the old hp laptop screen innolux BT156GW01 V3.

    The firmware it came with is 8bit colour and the screen is 6bit.
    Is that a configuration setting I can do without updating the firmware?
    or do I have to download this 1366×768 firmware of yours?

    • no need to update software. you can make changes in the service menu. press Menu then 1147 then panel setting and change bit mode or LVDS

      • In the menu (menu + 1147 or input +2580) it doesn’t allow to change to 6-bit
        or to change LVDS MAP or CHANNEL.
        not with left and right arrows or enter.

        Is there a trick to change it? or do i need to upgrade the firmware?

        System info
        Mantis/OCS: CPS8_18010296
        SW UPGRADE NAME: VST56_4MB.bin
        PANEL INFO: PANEL_CMO_32_B1
        EDID: OK
        TUNER TYPE: RAFAEL_042_R040
        BOARD TYPE: T.VST56.03
        FLASH SIZE: 4M
        MEMORY SIZE: 64M

        • First, take the backup and then try to load other software

          • and does your software (T.V56.03_1366X768 – FACTORY REMOTE) works for my case?

            my screen is a innolux BT156GW01 V3

          • yes it works

          • I could fix it without updating the firmware.

            The problem is V56 doesn’t allow you to change manually the
            COLOUR BIT
            LVDS MAP
            LVDS CHANNEL

            in the PANEL SETTINGS, the first option is the PRESET ID.
            only there you can change it.

            It was at 0 for me. i could change it to 1 and, when i tryed to change forward to 2 it went all black, so I got back to 1 or 0.

            ONLY THEN, i tried to keep going forward even though the screen was all black…and shazam! at the number 5, the bit colour changed to 6bit, and LVDS MAP and CHANNEL was set right and my screen is perfect now.

            If anyone face this problem that’s the right solution to it.
            Thank you Kazmielecom and good luck for you all DIY’ers.

  18. Kazmi sahib please share T.R 83.031 V3 bin file

  19. santosh kumar sharma

    Larning

  20. i want t.v56.a8 univasal board softwer

  21. It works amazing , thank you!

  22. Vhai jan mujhe sofwer chahyea

  23. T.V53.03 per ye firmware use ho sakte hain kia.???

  24. Hey anyone know how to make the monitor turn on automatically when the power is connected? It’s for an arcade monitor and it did it before I updated the firmware.

  25. i copy pasted and bypassed it

    Panel Interface: Single channel or Dual channel LVDS

  26. V System: PAL/SECAM/NTSC

    Panel Interface: Single channel or Dual channel LVDS

    Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

    Multi-Language OSD: Yes

    Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

    Audio O/P Power: 2 x 3 Watt (8 ohm)

    Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

    USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

    USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)

    IR Control: Yes (Controllable by Remote Control)

    Electrical Parameters:

    Working Input Voltage: DC +12 Volt

    Maximum Current: 2000mA (Without Panel)

    Standby Power: <0.2W (for motherboard only)

  27. sir i want t.v56.03 software by micromax 13668768

  28. Hi, do you know how to backup the installed firmware? is it possible to do it from the service menu? I don’t see the option… 🙁 Thanks.

  29. Sir mujhe t.v56.03 ka 1024×768 ka software chahiye h

  30. Please, somebody can help me with the Data Sheet to T.V53.03. Thanks in advance.

  31. Please some body can help me with the data sheet to.v56.pa671

  32. Gustavo Adolfo RAMIREZ BERNAL

    hello i have a tiny problem my remote is not working and i lock on the key command,,, and now y dont know how to repair this problem you have idea how to to repair the key lock ? thanks for your answer

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

error: Content is protected !!