T.V56.03 SOFTWARE FREE DOWNLOAD ALL RESOLUTION

T.V56.03 Universal LCD/LED Controller Board

T.V56.03 is a small universal LCD/LED TV Driver Controller Board with DC input power and Jumper cap setting for Panel VCC.

Basic Info:

Model No. T.V56.03

Main Chipset: TSUMV56RUU-Z1

Trademark:

Display Format: up to 1920×1200

Aspect Ratio: 4:3, 16:9 & 16:10

T.v56.03

General Specifications:

TV System: PAL/SECAM/NTSC

Panel Interface: Single channel or Dual-channel LVDS

Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

Multi-Language OSD: Yes

Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface, and Earphone Out

Audio O/P Power: 2 x 3 Watt (8 ohms)

Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb),                                                 Picture (Jpg, jpeg, bmp, png), Text (text)

IR Control: Yes (Controllable by Remote Control)

Electrical Parameters:

Working Input Voltage: DC +12 Volt

Maximum Current: 2000mA (Without Panel)

Standby Power: <0.2W (for motherboard only)

Maximum Current for USB: 500mA

How to Upgrade Firmware:

  1. Copy the Required Firmware/software in FAT32 USB Disk
  2. Plugin the U disk into the Mainboard USB port of LCD/LED TV
  3. Switch ON the power and Wait even IR indicator led flashing in speed
  4. Done. Unplug the U-disk (It will take a max of 1 min to upgrade firmware)
  5. It continues to flash and never stop. This is normal, just wait about 1 minute, this means that the update is complete. Then turn off and turn off the u-disk

T.v56.03

Factory Service Mode:

Menu+1147

Note:

If you are new and do not have enough knowledge of loading or installing software/firmware or dump files then read here first.

How to Download:

Download your required software and then extract it you will get the folder. Now copy the files to USB or load with Programmer. For More Detail about the download process, watch the video Click Here

T.V56.03 Firmware All resolutions Free Download Here :

 

S.NO.RESOLUTIOND.LINK.1D.LINK.2
1T.V56.03_1024X768DownloadDownload
2T.V56.03_1280x1024DownloadDownload
3T.V56.03_1366X768DownloadDownload
4T.V56.03_1440X900DownloadDownload
5T.V56.03_1600X900DownloadDownload
6T.V56.03_1680X1050DownloadDownload
7T.V56.03_1920X1080DownloadDownload
8T.V56.03_1920X1200DownloadDownload
9T.V56.03_1280x800DownloadDownload
10T.V56.03_1366X768_SonyDownloadDownload
11T.V56.03_1920X1080_SonyDownloadDownload
12T.V56.03_1366X768_LGDownloadDownload
13T.V56.03_1920X1080_LGDownloadDownload
14T.V56.03_1366X768_SamsungDownloadDownload
15T.V56.03_1920X1080_SamsungDownloadDownload

61 comments

  1. Avatar Of Ravi Chauhan

    plz send softwair 56.30univarsal

  2. Avatar Of Rabindr Nath Sharma

    Sir I want led lcd tv software please give me

  3. Avatar Of Ajay

    I WANT T .V56.03 UNIVERSAL BOARD BIOS FIRMEWARE . WHARE IS AVALABLE. PLZ GAID ME

  4. Avatar Of Milind

    Need firmware for 1024×600

  5. Avatar Of Indra

    hello.
    i need dump rom for this board because my eeprom chip was replaced.
    can you share..
    many tanks.

  6. Avatar Of Nitesh D Gamit

    Plz. 56j11.2 software to resolution

  7. Avatar Of Ruel Rubio

    firmware T.V56.03 1366×768 samsung and also in general is not working.. pls.. help me! what swill i do and if need to pay for the firmware to work, how much the cost of this? i hope is not so expensive.

  8. Avatar Of John

    I need software tv56.03 1680-1050.. using sony remote.. Pls help me.

  9. Avatar Of Pk

    Sir T.V56.03 Firmware software1920×1080 resolution please give me

  10. Avatar Of Niteshbhai D. Gamit

    Sir 56.03 all resolution software please sent me

  11. Avatar Of Edgar

    Sir my board is T.V56.031 IT THE TO the t.v.03?

  12. Avatar Of Luis Nuñez M
    Luis Nuñez M

    Dear, good afternoon, I have, the controller card T.V56.03, an LDC of a TV LG 37LK450-SG.AWHYLUR, its screen is LCD is “LC370WUE-SCA1”, 1920×1080, 12 Vdc, I connect everything but I do not load the firmware neither general nor the others. Consult, I need an investment card to work or only with the T.V56.03 direct vast and superfluous, thanks, I remain attentive to your comments, I hope you can help me.

  13. Avatar Of Harishankar Sharma
    harishankar sharma

    Sir T.V 56.03 univarsl bod to 12801224 Resolution Software please sent me

  14. Avatar Of Francis Oscar Klipp
    Francis Oscar Klipp

    1366×768 lg takes me to 1920×1080

  15. Avatar Of Francis

    cam you direct me to a video because i cant seem to get mine to work

  16. Avatar Of Francis

    can you tell me where to get on i had to return mine because it was broken and i dont trust the seller

  17. Avatar Of Henriqueweis

    i bought the T.V56.03 CONTROLLER BOARD (TSUMV56RUU-Z1 / A7MPP46A / 1829A)
    for the old hp laptop screen innolux BT156GW01 V3.

    The firmware it came with is 8bit colour and the screen is 6bit.
    Is that a configuration setting I can do without updating the firmware?
    or do I have to download this 1366×768 firmware of yours?

    • Avatar Of Kazmielecom

      no need to update software. you can make changes in the service menu. press Menu then 1147 then panel setting and change bit mode or LVDS

      • Avatar Of Henriqueweis

        In the menu (menu + 1147 or input +2580) it doesn’t allow to change to 6-bit
        or to change LVDS MAP or CHANNEL.
        not with left and right arrows or enter.

        Is there a trick to change it? or do i need to upgrade the firmware?

        System info
        Mantis/OCS: CPS8_18010296
        SW UPGRADE NAME: VST56_4MB.bin
        PANEL INFO: PANEL_CMO_32_B1
        EDID: OK
        TUNER TYPE: RAFAEL_042_R040
        BOARD TYPE: T.VST56.03
        FLASH SIZE: 4M
        MEMORY SIZE: 64M

        • Avatar Of Kazmielecom

          First, take the backup and then try to load other software

          • Avatar Of Henriqueweis

            and does your software (T.V56.03_1366X768 – FACTORY REMOTE) works for my case?

            my screen is a innolux BT156GW01 V3

          • Avatar Of Kazmielecom

            yes it works

          • Avatar Of Henriqueweis

            I could fix it without updating the firmware.

            The problem is V56 doesn’t allow you to change manually the
            COLOUR BIT
            LVDS MAP
            LVDS CHANNEL

            in the PANEL SETTINGS, the first option is the PRESET ID.
            only there you can change it.

            It was at 0 for me. i could change it to 1 and, when i tryed to change forward to 2 it went all black, so I got back to 1 or 0.

            ONLY THEN, i tried to keep going forward even though the screen was all black…and shazam! at the number 5, the bit colour changed to 6bit, and LVDS MAP and CHANNEL was set right and my screen is perfect now.

            If anyone face this problem that’s the right solution to it.
            Thank you Kazmielecom and good luck for you all DIY’ers.

  18. Avatar Of Abid Qayyum

    Kazmi sahib please share T.R 83.031 V3 bin file

  19. Avatar Of Santosh Kumar Sharma
    santosh kumar sharma

    Larning

  20. Avatar Of Akhil Karki

    i want t.v56.a8 univasal board softwer

  21. Avatar Of Bazileus

    It works amazing , thank you!

  22. Avatar Of Mh Hasnain

    Vhai jan mujhe sofwer chahyea

  23. Avatar Of Faizan

    T.V53.03 per ye firmware use ho sakte hain kia.???

  24. Avatar Of Julian

    Hey anyone know how to make the monitor turn on automatically when the power is connected? It’s for an arcade monitor and it did it before I updated the firmware.

  25. Avatar Of I Copy Pasted And Bypassed It
    i copy pasted and bypassed it

    Panel Interface: Single channel or Dual channel LVDS

  26. Avatar Of Peter

    V System: PAL/SECAM/NTSC

    Panel Interface: Single channel or Dual channel LVDS

    Key Button Functions: CH-/CH+/MENU/VOL-/VOL+Souce/Power

    Multi-Language OSD: Yes

    Input/Output Ports: HDMI, VGA, AV, USB, RF TV interface and Earphone Out

    Audio O/P Power: 2 x 3 Watt (8 ohm)

    Panel Voltage: +3.3V/+5V/+12V DC (jumping cap setting)

    USB Port: Yes (Firmware Upgrade and Multimedia Playback Support)

    USB File Format: Audio (Mp3, wma, m4a/aac), Video (avi, mp4, ts/trp, mkv/mov, mpg, dat, vob, rm/rmvb), Picture (Jpg, jpeg, bmp, png), Text (text)

    IR Control: Yes (Controllable by Remote Control)

    Electrical Parameters:

    Working Input Voltage: DC +12 Volt

    Maximum Current: 2000mA (Without Panel)

    Standby Power: <0.2W (for motherboard only)

  27. Avatar Of

    sir i want t.v56.03 software by micromax 13668768

  28. Avatar Of Josep

    Hi, do you know how to backup the installed firmware? is it possible to do it from the service menu? I don’t see the option… 🙁 Thanks.

  29. Avatar Of Gaurav Kumar

    Sir mujhe t.v56.03 ka 1024×768 ka software chahiye h

  30. Avatar Of Julio

    Please, somebody can help me with the Data Sheet to T.V53.03. Thanks in advance.

  31. Avatar Of Anisur Anisur
    Anisur anisur

    Please some body can help me with the data sheet to.v56.pa671

  32. Avatar Of Gustavo Adolfo Ramirez Bernal
    Gustavo Adolfo RAMIREZ BERNAL

    hello i have a tiny problem my remote is not working and i lock on the key command,,, and now y dont know how to repair this problem you have idea how to to repair the key lock ? thanks for your answer

  33. Avatar Of Nishchal

    vs.sp35851.22. software

  34. Avatar Of Gilson Silva

    boa tarde amigo tudo bem? estou precisando do sofwere da placa universal i.a.mv 56 u.a pra funcionar no display Samsung modelo LTM24CT04, nao achei na internet o sofwere.obrigado aguardando resposta…

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

error: Content is protected !!